2. Atoll Electronique
  3. DC200
DC200

Atoll Electronique DC200 Owner's manual

  • I have analyzed the provided user manual for the CD Signature DC200 digital input board. The document provides instructions on installing the board, which includes connecting the ribbon flex and securing the board with screws. I am ready to answer any questions you may have about the installation process or the device itself.
  • What should I do before starting the installation?
    How many screws are included?
    Where can I find more usage information?
DIGITAL INPUTS DAC BOARD DC200
Careful: before any intervention, switch off your appliance and unplug
all cables.
Using: see CD Signature
owner’s manual.
Enclosed:
1 digital input board.
1 plastic button.
3 screws.
SCREWS
PLASTIC COVER
RIBBON
FLEX
DIGITAL INPUTS BOARD
FOR CD PLAYERS CD SIGNATURE
1) Unscew the back cover.
2) Get off the top cover (4 screws).
3) Fix the ribbon flex of the digital board on the connector of the main board.
4) Put the plastic cover and the card in the slot provided and screw it to the main
chassis with the screws provided.
5) Close the appliance.
/