FUFU&GAGA KF200157-02 User manual

KF200157-02
FUFU&GAGA
Brand
FUFU&GAGA
Model
KF200157-02
Type
User manual

This manual is also suitable for

Chest
Version:07/04/2022 1/12
2/12
please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because
the board is easy to break.
IMPORTANT !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
step of the instructions carefully.
ANTI-TOPPLE WARNING !
Try to find a partner to install
with you, which can speed up
the installation efficiency and
shorten the time.
IMPROVE EFFICIENCY !
In order to avoid scratching this
furnuture should be assembled
on a soft layer-could be a rug.
AVOID SCRATCHES!
When installing, please carefully confirm whether
each screw corresponds to the manual, accessories
with similar shapes can be distinguished by size
Please prepare the following tools
3/12
3 x 12 mm 15 x 9 mm
C x 40
6 x 35 mm
4 x 35 mm 6 x 30 mm
6 x 30 mm
8 x 30 mm
D x 32 E x 32 F x 8 CR x 5
CL x 5 DR x 5 DL x 5 G x 25
J x 10 L x 1 M x 1
P x 1
4 x 14 mm
H x4
K x 5 N x 1
3.5 x 14 mmm
4/12
x5
1
2
3
45
6
7
8
8
12
13
9
10
11
DD
C
C
C
C
C
C
C
C
C
C
D
C
CL
C
CR
DD
C
C
C
C
C
C
C
C
C
C
CR
CR
CR
CR
CR
CL
CL
CL
CL
CL
2
3
1
CR x 5 CL x 5
1
3 x 12 mm 6 x 35 mm
C x 20 D x 8
5/12
Fix runner CL&CR to panel 2 and 3 as shown.
Insert quickfit screw D into panel 2 and 3.
Please pay attention to the holes where the
accessories are inserted and don't use an
electric screwdriver.
DD
D
D
2
E x 8
6/12
15 x 9 mm
IIIIII
25
4
5
24
3
EE
E
E
EE
E
E
E
E
Attach panel 4 and 5 to panel 2, turn
cam lock E clockwise to tighten as
shown.
Attach panel 3 and turn cam lock E
clockwise to tighten as shown.
3
7/12
4
DD
DD
J
J
K
J
J
D
D
D
D
D
J x 10
3.5 x 14 mm
K x 5
D x 24
6 x 35 mm
x5
K
F
F
F
F
F
F x 4
6 x 30 mm
1
9
6
3
2
Insert quickfit screw D
into panel 1 and 9 as
shown.
Fix handle K to panel
9 with screw J
as shown.
Insert wooden dowels F to the
corresponding holes in panel
3&2 slightly.
Slide panel 6 to the available
slots in panel 3&2 as shown.
5
E x 4
8/12
6
F x 4
6 x 30 mm
15 x 9 mm
IIIIII
Flip the assembled component 180°.
Insert wooden dowels F to the
corresponding holes in panel 3&2
slightly.
Slide panel 6 to the available slots in
panel 3&2.
E
E
EE
F
6
3
2
1
3
2
1
1
Cover panel 1 to panel 2 and 3, turn
cam lock E clockwise to tighten as
shown.
7
G x 4
9/12
4 x 35 mm
8
H x 4 L x 1
6 x 30 mm
Attach panel 7 to panel 2&3 using
screw G. Please note don't use an
electric screwdriver or use force to
rotate, may cause crack.
Fix legs 8 to panel 7 using nail H as shown.
H
L
8
7
G
G
G
G
3
7
2
L
H
H
H
H
8
8
7
G
9
10/12
G x 20
4 x 35 mm
10
Attach panel 10 and 11 to panel 12 using screw G. as shown.
x5
G
G
G
G
10
11
12
10
11
12
13
x5
G
G
10
12
Slide panel 13 to available slots in panel 10&11.
11
11/12
12
C x 20 DR x 5 DL x 5
3 x 12 mm
E x 20
15 x 9 mm
x5
IIIIII
Attach panel 9 to the assembled
component, then turn cam locks E
clockwise to tighten as shown.
Fix runner DR&DL to panel 11&10 using screw C.
Please pay attention to the holes where the
accessories are inserted.
9
13
10
12
11
E
E
E
E
C
C
C
C
DR
DL
9
13
C
DL
x5
E
E
9
14
12/12
G x 1 N x 1
4 x 35 mm 4 x 14 mm
M x 1 P x 1
6 x 30 mm
If you want to stabilize the unit, you
could choose install anti-tipping device
as shown.
M
N
PMG
P
N
MG
9
9
9
9
9
WARRANTY CLAIMS
•There is a 30-day warranty for broken furniture or any other problems that do not
work properly. The warranty will start from the date of purchase which must be
verified by proof of purchase.
•Before making a claim, we may be able to answer your query, simply call us. Please
leave your purchase order number, along with some details of the problem, if you
want a replacement part. We will arrange within 48 hours. If there is out of stock,
we will reply with a shipping date.
•The product must be used in accordance with the instructions provided. For health
reasons.
•For other reasons, if the furniture needs to be returned, it must be cleaned and dried
and operated within 30 days of receipt.
Type of Warranty Claim
•Failure to follow the furniture instructions will invalidate the warranty. Attention please.
•Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
•Shall not bear any responsibility for misuse or user damage and / or loss of parts during
the installation of furniture.
•After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The
Following Areas
•Sheet parts: 1 month from the date of purchase.
•Electrical parts: 1 month from the date of purchase.
WARRANTY
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
•If you have purchased and have simply changed your mind, follow the retailer’s
instructions for returns.
DEFECTIVE ITEMS
•If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in
the first instance, please call us.
DAMAGED ITEMS
•If you receive an order with obvious shipping damage from the retailer, then we suggest
the delivery is refused. If the delivery has been accepted and then shipping damage is
found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order.
Please be aware that if you dispose of packaging material or attempt to return the
merchandise without contacting the fulfiller, you jeopardise your chances of making a
claim, and you may not receive a credit for the return.
RETURNS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

FUFU&GAGA KF200157-02 User manual

KF200157-02
FUFU&GAGA
Brand
FUFU&GAGA
Model
KF200157-02
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents