COMLINE WOOD PANEL

The ComLine Wood Panels are used to surface-mount equipment within a

cabinet. They are pre-cut and pre-drilled to install on panel mounting studs in the

rear of the cabinet.

FEATURES & BENEFITS

The ComLine Wood Panels are used to surface-mount equipment within a cabinet

They are pre-cut and pre-drilled to install on panel mounting studs in the rear of the cabinet

E60P60W 524 x 524 mm

E90P60W 824 x 524 mm

E90P70W 824 x 624 mm

2100 Hoffman Way

Anoka, MN 55303-1745 | USA

© 2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their

respective owners.

nVent reserves the right to change specifications without notice.