nVent Hoffman SHT Series User manual

TELESCOPIC VENTILATED SHELF, SHT

For easy access to installed equipment. Mounted directly to the enclosure`s

frame. Partial depth mounting is an option. Possibility to take the shelf out of the

slides even after mounting into the enclosure. Reversed and side mounting

possible.

FEATURES & BENEFITS

This shelf can be extracted to allow for the inspection and maintenance of installed components. It has ventilation openings

to ensure for proper air circulation within the enclosure.

Feature: telescopic zinc plated steel shelf with ventilation openings, for floor standing enclosures

Advantage: the shelf can be extracted easily allowing better access to the mounted components or equipment

Benefit: the shelf can be extracted allowing the installed components to be inspected and maintained easily; the ventilation

openings does not prevent the enclosure's air circulation which reduces the risk of potential hot spots

Comment: if it is not required that the shelf covers the complete depth of the enclosure, then a shorter shelf can be mounted

using profiles, SHTP, in the enclosure's depth

Maximum load: 500 N (112)

Mounting requirements: add SHTP profiles for full/partial depth installation to the enclosure’s frame

SPECIFICATIONS

Zinc Plated

Unpainted

2 mm

Finish

Color

Thickness

Table 1/1

Catalog Number Height Width Depth Material

SHT0606 46 mm 502 mm 500 mm Mild Steel

SHT0608 46 mm 502 mm 700 mm Mild Steel

SHT0806 46 mm 702 mm 500 mm Mild Steel

SHT0808 46 mm 702 mm 700 mm Mild Steel

2100 Hoffman Way

Anoka, MN 55303-1745 | USA

763.421.2240

respective owners.

nVent reserves the right to change specifications without notice.

Our powerful portfolio of brands:

nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER