2. nVent Hoffman
  3. E120P70W
E120P70W

nVent Hoffman E120P70W Operating instructions

  • Hello! I've reviewed the product details for the ComLine Wood Panels. This document provides information about their construction, including the material, finish, and dimensions, as well as their intended use for surface mounting equipment in a cabinet. I'm ready to answer any questions you have about the panels.
  • What material are the ComLine Wood Panels made of?
    Are the wood panels painted?
    What is the thickness of the wood panels?
COMLINE WOOD PANEL
The ComLine Wood Panels are used to surface-mount equipment within a
cabinet. They are pre-cut and pre-drilled to install on panel mounting studs in the
rear of the cabinet.
FEATURES & BENEFITS
The ComLine Wood Panels are used to surface-mount equipment within a cabinet
They are pre-cut and pre-drilled to install on panel mounting studs in the rear of the cabinet
SPECIFICATIONS
Wood
Unpainted
Sanded
19 mm
Material
Color
Finish
Thickness
Table 1/1
Catalog Number Dimensions
E120P70W 1124 x 624 mm
E60P60W 524 x 524 mm
E90P60W 824 x 524 mm
E90P70W 824 x 624 mm
2100 Hoffman Way
Anoka, MN 55303-1745 | USA
763.421.2240
© 2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their
respective owners.
nVent reserves the right to change specifications without notice.
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
22
/