2. Thermorossi
  3. CHIC SUPREME NATURAL AIR
CHIC SUPREME NATURAL AIR

Thermorossi CHIC SUPREME NATURAL AIR, Chic Supreme Installation guide

  • Hello! I've reviewed the installation guide for THERMOROSSI's CHIC and CHIC SUPREME casings. This guide provides detailed instructions for assembling the casing, with specific steps for both models and different body types. I'm ready to assist with any questions you might have about the assembly process or handling of the majolica elements.
  • What should I use to clean the majolica tiles?
    What should I do if my appliance has a NATURAL body?
    How should I handle majolica elements?
CHIC – CHIC SUPREME
INSTALLATION GUIDE.
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 1
ENG
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 2
ENG
INDEX
INSTRUCTIONS VALID ONLY FOR CHIC ................................................................................................ 3
1 – INTRODUCTION.................................................................................................................................. 3
2 – COMPONENTS ................................................................................................................................... 3
3 – ASSEMBLING THE CASING .............................................................................................................. 4
INSTRUCTIONS VALID ONLY FOR CHIC SUPREME ............................................................................. 7
1 – INTRODUCTION.................................................................................................................................. 7
2 – COMPONENTS ................................................................................................................................... 7
3 – ASSEMBLING THE CASING .............................................................................................................. 8
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 3
ENG
INSTRUCTIONS VALID ONLY FOR CHIC
1 – INTRODUCTION
1.1 GENERAL GUIDELINES
ATTENTION: The majolica elements are handcrafted so they could contain subtle surface imperfections, crazing or
shade variations. The layer of glaze has an expansion factor that is different to that of the majolica tiles which is what
causes the hairline cracks. This phenomenon is a natural process and is not a defect. We recommend cleaning the
majolica tiles with a dry microfibre cloth. Using moist or wet cleaning cloths would show up the natural crazing even
more.
Thermorossi S.p.A. retains copyright on theses service instructions. These instructions may not be reproduced or communicated to
third parties or used in any other way without the necessary authorisation.
1.2 TRANSPORTATION AND STORAGE
TRANSPORTATION AND HANDLING
Take special care to protect all the fragile parts from mechanical impact which could damage them.
STORAGE
The casing must be stored in a humid-free environment and sheltered from the weather; avoid placing the casing directly on the
ground. The company is not responsible for damages caused by negligence.
2 – COMPONENTS
The kit includes the following elements:
A - B
Protective polystyrene
C
Upper side panels
D
Protective cardboard
E
Lower side panels
F
Upper majolica
G
Lower majolica
H
Support bracket
I-L-M-N
Compensating profiles
Attention: The majolica elements are delicate and must be handled with extreme
care. Use soft cotton gloves when handling them. Clean with soft dry microfibre
cloths for delicate surfaces such as lenses or glasses.
A
B
C
D
E
F
G
H
I
L
M
N
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 4
ENG
G
E
C
DETTAGLIO C
D
DETTAGLIO D
A
DETTAGLIO A
B
DETTAGLIO B
1
2
3
4
4
H
4
3 – ASSEMBLING THE CASING
A
DETTAGLIO A
B
DETTAGLIO B
1
2
3
4
4
H
2 - Undo the 4 screws (4) and remove the
majolica support bracket.
A
DETTAGLIO A
B
DETTAGLIO B
1
2
3
4
4
H
4
1 - Fasten the support bracket (H) to the hole
(3) using the screw (1) and nut (2).
ATTENTION: If your appliance has a
NATURAL body do not carry out this operation;
start directly from the next point.
4 - Adjust the two teeth illustrated in the DETAIL
B box to firmly secure the majolica to the
bracket. Lastly fasten the bracket with the
majolica using the 4 screws (4) removed earlier.
3 - Insert the lower majolica (G) on the bracket
that you have just removed.
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 5
ENG
5 - Mount the four compensating profiles, (I-L-
M-N), by inserting the hooks in the slots
provided on the body of the appliance. In some
cases it may be necessary to break off the last
hook at the bottom of the upper profile.
6 - Detail A shows the hook correctly inserted in the slot. Then use a
screwdriver to turn the hooks outwards to firmly secure the
compensating profiles to the appliance.
7 - Insert the lower side panel (E) on the teeth
provided, as illustrated in details C and D.
Slightly bend the teeth so as to firmly secure the
majolica to the body. Carry out the same
procedure on the opposite side.
8 - Insert the upper side panel (C) on the teeth
provided, as in the previous point. Slightly bend
the teeth so as to firmly secure the majolica to
the body. Carry out the same procedure on the
opposite side.
C
DETTAGLIO C
D
DETTAGLIO D
F
DETTAGLIO F
0.8
NI
ML
A
DETTAGLIO A
B
DETTAGLIO B
E
DETTAGLIO E
E
DETTAGLIO E
G
E
C
DETTAGLIO C
D
DETTAGLIO D
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 6
ENG
10 - Insert the upper majolica (F) on the teeth
provided. Slightly bend the teeth so as to firmly
secure the majolica to the body.
ATTENTION: If your appliance has a
NATURAL body do not carry out this operation;
start directly from the next point.
E
DETTAGLIO E
F
F
11 - Insert the upper majolica (F) on the teeth
provided. Slightly bend the teeth so as to firmly
secure the majolica to the body.
ATTENTION: This operation is only to be
carried out on appliances with a NATURAL
body.
ADETTAGLIO A
B
DETTAGLIO B
F
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 7
ENG
INSTRUCTIONS VALID ONLY FOR CHIC
SUPREME
1 – INTRODUCTION
1.1 GENERAL GUIDELINES
ATTENTION: The majolica elements are handcrafted so they could contain subtle surface imperfections, crazing or
shade variations. The layer of glaze has an expansion factor that is different to that of the majolica tiles which is what
causes the hairline cracks. This phenomenon is a natural process and is not a defect. We recommend cleaning the
majolica tiles with a dry microfibre cloth. Using moist or wet cleaning cloths would show up the natural crazing even
more.
Thermorossi S.p.A. retains copyright on theses service instructions. These instructions may not be reproduced or communicated to
third parties or used in any other way without the necessary authorisation.
1.2 TRANSPORTATION AND STORAGE
TRANSPORTATION AND HANDLING
Take special care to protect all the fragile parts from mechanical impact which could damage them.
STORAGE
The casing must be stored in a humid-free environment and sheltered from the weather; avoid placing the casing directly on the
ground. The company is not responsible for damages caused by negligence.
2 – COMPONENTS
The kit includes the following elements:
A
Compensating profiles
B
Lower majolica
C
Upper majolica
D
Lower side panels
E
Upper side panels
F
Central majolica (only for air products)
G-H
Protective cardboard
I
Protective polystyrene
L
Compensating bracket
Attention: The majolica elements are delicate and must be handled with
extreme care. Use soft cotton gloves when handling them. Clean with soft dry
microfibre cloths for delicate surfaces such as lenses or glasses.
c
C
B
D
D
G
E
E
H
I
A
A
F
L
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 8
ENG
3 – ASSEMBLING THE CASING
4 - Insert the upper majolica (C) on the teeth
provided. Slightly bend the teeth so as to firmly
secure the majolica to the body.
ATTENTION: This operation is only to be
carried out on appliances with a NATURAL
body.
3 - Remove the tray and insert the upper
majolica (C) on the teeth provided. Slightly bend
the teeth so as to firmly secure the majolica to
the body.
ATTENTION: If your appliance has a
NATURAL body do not carry out this operation;
start directly from the next point.
2 - Undo the 4 screws (2) and remove the
majolica support bracket. Insert the lower
majolica (B) on the bracket that you have just
removed. Lastly fasten the bracket with the
majolica using the 4 screws (2) just removed.
A
DETTAGLIO A
1A
1
A
B
2
2
C
C
C
1 - Assemble both compensating profiles (A)
using screws (1) on the sides of the appliance,
as indicated in the figure.
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 9
ENG
7 – Insert the central majolica (F) as indicated in
the figure (only for air products). Fix it with
screws (4) and washers (3).
D
D
E
E
8 – ATTENTION:
The compensating bracket (L) has to be applied
only in those cases where the appliance body is
deeper than the central majolica (F) in order to
close the remaining gap.
5 - Insert the lower side panel (D) on the teeth
provided. Slightly bend the teeth so as to firmly
secure the majolica to the body. Carry out the
same procedure on the opposite side.
6 - Insert the upper side panel (E) on the teeth
provided, as in the previous point. Slightly bend
the teeth so as to firmly secure the majolica to
the body. Carry out the same procedure on the
opposite side.
F
3
4
L
F
3
4
L
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 10
ENG
Installation, use and maintenance guide
CASING CHIC – CHIC SUPREME
Page 11
ENG
Via Grumolo, 4 (Z.I.) 36011 Arsiero (VI) - ITALY
Fax 0445.741657 - www.thermorossi.com - info@thermorossi.it
Fire Lovers
Code 70030785 Rev. A 11/2020
/