Neewer 5d 2 Professional Photography Kit User manual

5d 2 Professional Photography Kit
Brand
Neewer
Model
5d 2 Professional Photography Kit
Type
User manual

Neewer 5d 2 Professional Photography Kit is a versatile and feature-rich kit designed to enhance your photography and videography experience. It includes various components that work together seamlessly to provide stability, precision, and flexibility in your shoots.

The kit includes a matte box, follow focus, counterweight, shoulder pad, front handle grips, and more. The matte box helps reduce lens flare and unwanted light, while the follow focus allows for smooth and precise focus adjustments during video recording. The counterweight balances the camera setup, ensuring stability, and the shoulder pad provides comfort during handheld shooting.

Neewer 5d 2 Professional Photography Kit is a versatile and feature-rich kit designed to enhance your photography and videography experience. It includes various components that work together seamlessly to provide stability, precision, and flexibility in your shoots.

The kit includes a matte box, follow focus, counterweight, shoulder pad, front handle grips, and more. The matte box helps reduce lens flare and unwanted light, while the follow focus allows for smooth and precise focus adjustments during video recording. The counterweight balances the camera setup, ensuring stability, and the shoulder pad provides comfort during handheld shooting.

5d 2 professional photography kit
A1
A2
A3
A4 Put ⑫ Front Handle Grips
Clamp Mount into A3.
A5
A6
A7
A8
A9
A10
A11
A12
A
B
A13
A14
A15
Use instructions
English
Product list
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑮
Matte box
(diameter 82mm) x 1
L type wrench x 1
Counter weight 1kg x 1
Follow focus F0 x 1
Gear Belt (suit the lens
blew 100mm) x 1
Rubber plug x 12
40cm tube x 2
20cm tube x 2
Z type bracket x 1
30cm tube Mount
Baseplate x 1
Shoulder pad x 1
Front Handle Grips
Clamp Mount x 1
C type bracket x 1
Conduit connector x 2
Put⑬ctypebracketinto
twoaluminumtubeof⑩30cm
tubeMountBaseplatetothe
picture.
Assembly instructions Assembly instructions Assembly instructions Assembly instructions Assembly instructions Using sketch map
Put⑨ztypebracketintoA1.
Put④followfocusf0intoA2.
Put ⑦ 40cm tube into A4.
Put ⑪ Shoulder pad
on the 40cm tube,
adjust it to a position
which is suitable for
human’s body.
Put ③ counter weight
on the 40 cm tube ,
behind the Shoulder
pad, and then twist
the screw.
Put ① Matte box on the A7.
Put two ⑧ 20cm tube
on 13 c type bracket.
Put ⑭ the handle on the
⑧ 20cmtube, adjust it to
a suitable distance and
then lock it.
A.Install the camera: first
take off the quick release
plate, put the camera on
the quick release plate.
As shown.
B.Put ⑤ Gear Belt on
the lens and lock.
Put A 11 on the Mount
Baseplate of 30cm tube
Mount Baseplate, the
camera lens to matte box,
adjust it to a fit position,
tighten the button.
According to the position
of gear belt on lens to
move the follow focus,
match the two gears on
follow focus and gear belt,
then fixed it.
Put ⑥ Rubber plug on the
30cm tube and 40cm tube.
Tighten all the screw,
Avoid the separation
and loosening of
the parts.
Pay attention to
3
尺 寸 ：8 5 *128mm 9折 页 英 文 在 正 面 ， 中 文 在 背 面
①
②
③④ ⑤ ⑥ ⑦
⑧ ⑨
⑭
⑬⑫
⑪
⑩
⑮
⑭The handle x 1
尺 寸 ：8 5 *128mm 9折 页 英 文 在 正 面 ， 中 文 在 背 面
5 D 2 专 业 摄 影 摄 像 套 件
使用说明书
中文版
①遮 光 斗M 1
(口 径8 2 m m ) x 1
②L型 扳 手 x 1
③砝 码1 k g x 1
④跟 焦 器F 0 x 1
⑤跟 焦 环 （ 适 合1 0 0 m m
以 下 的 镜 头 ）x 1
⑥胶 塞 x 1 2
⑦4 0 c m导 管 x 2
⑧2 0 c m导 管 x 2
⑨Z型 支 架 x 1
⑩3 0 c m管 底 座 板 x 1
⑪
⑫
肩 垫 x 1
⑬
前手柄底座 x 1
⑭
C型 支 架 x 1
提 手 x 1
产 品 清 单 组 装 说 明
A1 将 ⑬ (C型 支 架)按
图 示 位 置 装 入 ⑩
（3 0 c m管 底 座 板 ）
的 两 根 铝 管 。
A2 将 ⑨ (Z型 支 架)按
图 示 方 向 装 入A 1。
A3 将 ④ (跟 焦 器F 0 )按
图 示 方 向 装 入A 2。
组 装 说 明
A4 将 ⑫ (前 手 柄 底 座)按
图 示 方 向 装 入A 3。
A5 将 ⑦ (4 0 c m导 管)按
图 示 方 向 装 入A 4
Z型 支 架 上 。
A6 将 ⑪ (肩 垫)按 图 示
方 向 装 入4 0 c m导
管 上 ， 调 节 到 适 合
人 体 距 离 的 一 个 大
概 位 置 上 。
组 装 说 明
A7 将 ③ (砝 码)按 图 示
方 向 装 入4 0 c m导
管 上 ， 肩 垫 的 后 面 ，
然后扭紧手扭。
A8 将 ① (遮 光 斗M 1 )按
图 示 方 向 装 到A 7 上 。
A9 将2根 ⑧ (2 0 c m导 管)
装 入 ⑬ (C型 支 架)上 。
组 装 说 明
A10 将 ⑭ (提 手 ） 装 入
⑧ （2 0 c m导管）上，
调 节 至 适 合 人 体 距
离 后 锁 紧 。
A11 A. 安 装 相 机 ： 先 取
下 快 装 板 ， 将 相 机
安 装 到 快 装 板 上 。
如 图 所 示
B. 将 ⑤ （ 跟 焦 环 ）
装 到 相 机 镜 头 上 扭 紧 。
A12 将A 1 1按 图 示 装 到3 0 c m
管 底 座 板 上 ， 镜 头 方 向
要 装 入 遮 光 斗 内 ， 调 节
到 合 适 的 位 置 ， 扭 紧
固 定 快 装 板 旋 钮 。
A
B
组 装 说 明
A13 根据镜 头 上跟焦 环 的位置 ，
移动跟 焦 器，将 跟 焦器上
的齿轮 与 跟焦环 上 的齿轮
配合住 ， 配合好 后 ，固定
跟焦器手扭。
A14 将 ⑥ （ 胶 塞 ） 按 图 示 方 向
装 入30cm导 管 和4 0 c m
导 管 上 。
A15 将所有的手扭扭紧，以
避免各部件脱离和松动，
造成不必要的损失。
使 用 示 意 图温 馨 提 示
厚的一面
厚的一面
薄边
薄边
Z型支架的蓝色旋钮
正确安 装方法:
它应该连接在较薄的一侧
而不是较厚的一侧。
3
①
②
③④ ⑤ ⑥ ⑦
⑧ ⑨
⑭
⑬⑫
⑪
⑩
⑮
⑮导管连接器 x 2
  • Page 1 1
  • Page 2 2

Neewer 5d 2 Professional Photography Kit User manual

5d 2 Professional Photography Kit
Brand
Neewer
Model
5d 2 Professional Photography Kit
Type
User manual

Neewer 5d 2 Professional Photography Kit is a versatile and feature-rich kit designed to enhance your photography and videography experience. It includes various components that work together seamlessly to provide stability, precision, and flexibility in your shoots.

The kit includes a matte box, follow focus, counterweight, shoulder pad, front handle grips, and more. The matte box helps reduce lens flare and unwanted light, while the follow focus allows for smooth and precise focus adjustments during video recording. The counterweight balances the camera setup, ensuring stability, and the shoulder pad provides comfort during handheld shooting.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents