TELESCOPIC VENTILATED SHELF, SHT
For easy access to installed equipment. Mounted directly to the enclosure`s
frame. Partial depth mounting is an option. Possibility to take the shelf out of the
slides even after mounting into the enclosure. Reversed and side mounting
possible.
FEATURES & BENEFITS
This shelf can be extracted to allow for the inspection and maintenance of installed components. It has ventilation openings
to ensure for proper air circulation within the enclosure.
Feature: telescopic zinc plated steel shelf with ventilation openings, for floor standing enclosures
Advantage: the shelf can be extracted easily allowing better access to the mounted components or equipment
Benefit: the shelf can be extracted allowing the installed components to be inspected and maintained easily; the ventilation
openings does not prevent the enclosure's air circulation which reduces the risk of potential hot spots
Comment: if it is not required that the shelf covers the complete depth of the enclosure, then a shorter shelf can be mounted
using profiles, SHTP, in the enclosure's depth
Maximum load: 500 N (112)
Mounting requirements: add SHTP profiles for full/partial depth installation to the enclosure’s frame
SPECIFICATIONS
Zinc Plated
Unpainted
2 mm
Finish
Color
Thickness
