DS-1667ZJ
Extendable Pendant Mounting Bracket for PTZ Camera
Feature
Zinc-coated steel material with surface spray treatment
The hook for safety rope facilitates camera’s installation
The bracket can be adjusted between 1500 mm to 2500 mm
Dimension
A
A
1500 mm to 2500 mm
(59.1" to 98.4")
65 mm (2.6")
Φ 40 mm
(1.6" )
Φ 160 mm
(6.3")
Φ 200 mm (7.9")
R6 mm (0.24")
Available Model
DS-1667ZJ
Parameter
Extendable Pendant Mounting Bracket for PTZ Camera
1500 mm to 2500 mm × 200 mm (59.1" to 98.4" × 7.9")
Note
The bracket should be installed on the flat surface.
The waterproof rubber is necessary for the outdoor application.
The wall must be capable of supporting at least 3 times as much as the total weight of the camera and the bracket.
The bracket’s maximum load capacity is 10 Kg (22 lb.).