Coopers of Stortford K752 User manual

Easy Bulb Planter K752 Instructions for Use

Please read and retain these instructions for future reference v001: 09/05/22

Tips:

Irrigate the soil that is very dry or hard the day before planting bulbs to make it easier for the bulb

planter to drive into the ground. Slow watering with a soaker hose to the depth of the planting hole

is the best method.

WARNINGS / CAUTIONS:

• The tip has serrated edge to help dig into the soil. Take care when placing the bulb planter and

ensure it is clear from feet, external pipes and electric cables.

• Recommended maximum load is 66kg (10 stone approx)

CLEANING INSTRUCTIONS:

Always wipe clean after each use, removing all soil deposits thoroughly and dry with a soft cloth.

Store safely in a secure garden tool box shed away from children.

DISPOSAL:

• Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your

local recycling regulations.

• At the end of the product’s lifespan please dispose of it at an authorised household waste

recycling centre.

USER INSTRUCTIONS:

1. Place the bulb planter on the soil where you want to

plant a bulb. The bottom has serrated edges to dig into

the soil and the top has a handle.

2. Place one foot onto the footplate and press the bulb

planter straight down into the soil to the depth needed.

3. Twist the bulb planter in either direction one-quarter

turn. Lift the planter straight up and out of the soil. You'll

see a soil plug inside the planter body.

4. Place your bulb in the hole with the round root side down

and the pointy end facing up.

5. Hold the bulb planter over the hole and tap the base to

deposit the soil inside into the planting hole. Gently press

the soil down over the bulb.