CRU Dataport RTX410-XJ User manual

Brand: CRU Dataport

Model: RTX410-XJ

Category: HDD/SSD enclosures

Type: User manual

This manual is also suitable for

R T X 4 - b a y U s e r M a n u a l A 9 - 4 0 0 - 0 0 0 7 R E V 1 . 0 - 1 -

RTX™ 4-bay

USER MANUAL

Revised March 20, 2012

Features

• TrayFree technology – no need to install your hard drives into trays. Simply slide in a SATA drive and

shut the door.

• Patented, custom SATA drive interface is built to withstand thousands of drive insertions.

• Fast data connection options: USB 3.0, eSATA, FireWire 800, and multi-lane SAS/SATA.

• Sturdy aluminum case provides excellent heat dissipation and rugged durability.

Models covered:

• RTX400H-SV

• RTX410-3QJ,

• RTX410-3SJ,

• RTX410-XJ

CRU

R T X 4 - b a y U s e r M a n u a l A 9 - 4 0 0 - 0 0 0 7 R E V 1 . 0 - 2 -

Table of Contents

1. Pre-Installation Steps 2

1.1 Accessories 2

1.2 Identifying Parts 3

1.3 RTX 4-bay host connections

2. Using RTX 4

2.1 Installing a Hard Drive 4

2.2 Connecting and Powering RTX 4

3. Usage with Mac and Windows Operating Systems 4

3.1 Usage with Macintosh Computers 4

3.1.1 Compatibility 4

3.1.2 Formatting a drive 4

3.1.3 Mounting and unmounting volumes 5

3.1.4 Creating a boot drive 5

3.2 Usage with Windows Computers 5

3.1.1 Compatibility 5

3.1.2 Formatting a drive 5

3.1.3 Mounting and unmounting volumes 6

3.1.4 Creating a boot drive 6

4. Warnings and Notices 6

5. Frequently Asked Questions 6

6. Technical Specifications 8

1. Pre-Installation Steps

1.1 Accessories

Check the accessories with your RTX. The box should contain the following items:

Item Quantity

RTX unit 1

Data cables Model dependant

Power cord 1

Packet of screws and keys 1

Quick Start Guide and Warranty Information 1

CRU

R T X 4 - b a y U s e r M a n u a l A 9 - 4 0 0 - 0 0 0 7 R E V 1 . 0 - 3 -

1.2 Identifying Parts

Take a moment to familiarize yourself with the parts of RTX. This will help you to better understand the

remaining instructions.

1.3 RTX 4-bay host connections

Connection

3QJ

Model

3SJ

Model

FireWire 800 8

USB 3.0 4 4

eSATA 4 4

Port-Multiplied

eSATA

Multi-Lane

SAS/SATA 6Gbps

(SFF-8088)

Ejection handle

Key Lock

Power and Access LEDs

7.5cm Fan

USB 3.0 Port

eSATA Port

Power

Supply Fan

Power Switch

Power Connection Port

FireWire Port

RTX TrayFree bay

Rear of RTX 4-bay

RTX410-3QJ shown

here. For information on

the host connections of

other RTX 4-bay models,

see section 1.3.

CRU

R T X 4 - b a y U s e r M a n u a l A 9 - 4 0 0 - 0 0 0 7 R E V 1 . 0 - 4 -

NOTE:

To connect RTX410-3QJ to a

USB 2.0 host, you must use a USB 2.0

cable.

2. Using RTX

2.1 Installing hard drives

RTX features TrayFree technology, so installing a hard drive couldn’t be easier! Simply pull the ejection

handle to open the door, slide a SATA drive inside, and shut the door behind it.

2.2 Connecting and powering RTX

Plug in the data cable and power cord. RTX can connect to your computer in one of several ways.

Cables for all data connection types are included for your convenience. Plug the power adapter cable

into a grounded electrical outlet.

Your RTX is now ready to use! Turn on the power switch on the back of the unit. If your drive is already

formatted, you can begin using it right away. New hard drives will need to be formatted before they can

be used.

Usage with Mac and Windows Operating Systems

3.1 Usage with Mac OS X

3.1.1 Compatibility

RTX uses 3.5-inch SATA (Serial-ATA) hard drives only. RTX does not require drivers for operation under

Mac OS X. However, if you install a host card specifically to work with this product, that card may require

drivers. See your card’s User Manual for drivers and instructions.

3.1.2 Formatting a drive

If you purchased your RTX pre-populated with hard drives, this step should not be necessary unless you

wish to change the format or erase the drive. To format, use Mac OS X’s Disk Utility (found in the

applications folder).

a) Click on the drive in the window to the left (see picture below).

b) Click the Erase tab in the window to the right (see picture below).

c) Select the format type. Most users prefer Mac OS Extended with Journaling (HFS+), which is required

for compatibility with Time Machine (OS 10.5 or newer). If you need to use your drive with both Mac and

Windows computers, select MS-DOS File System instead.

d) Enter a name for the new volume and then click “Erase” to start the process.

CRU

R T X 4 - b a y U s e r M a n u a l A 9 - 4 0 0 - 0 0 0 7 R E V 1 . 0 - 5 -

3.1.3 Mounting and unmounting volumes

If the hard drives installed in the product are already formatted, an icon representing the drive’s volume

will appear (mount) on the desktop. You can begin using the volume right away. If the drive is

unformatted, a message will appear on the desktop saying that the disk is unreadable. You can use OS

X’s Disk Utility to easily format the drive (see section above).

Unmount the volume before powering down the unit by dragging the volume’s icon to

the trash bin, or by selecting the volume then pressing Command-E. Disconnecting

the unit without first unmounting the volume can result in data loss.

3.1.4 Creating a Boot Drive

To activate this feature, you must first install OS X on the hard drive in your carrier.

The easiest way to do this is to clone an existing system drive using a utility such as

Carbon Copy Cloner or Super Duper. Next, go to System Preferences  Startup

Disk. A window will list the available bootable volumes. Select the volume from which you wish to boot.

Another method is to hold down the Option key during boot up. A screen should appear that allows you to

select the volume you wish to use. This is useful if you wish to boot from your RTX hard drive only some

of the time.

3.2 Usage with Windows operating systems

3.2.1 Compatibility

RTX uses 3.5-inch SATA (Serial-ATA) hard drives only. RTX does not require drivers for operation under

Windows XP, Vista, or 7. However, if you install a host card specifically to work with this product, that

card may require drivers. See your card’s User Manual for drivers and instructions.

3.2.2 Formatting a drive

If you purchased your RTX pre-populated with a hard drive, this step should not be necessary unless you

wish to change the format or erase the drive. To format, use the Disk Management utility.

a) Right-click on My Computer, then select Manage. The Computer Management window will open.

b) In the left pane of this window, left-click on Disk Management.

c) The drive should appear in the list of Disks in the lower middle/right pane (see picture below). You

may need to scroll down to see it. If the drive is already formatted, you can identify it easily by its volume

name. If it’s unformatted, the Drive Properties Box will say “Unallocated” and you’ll need to initialize the

disk before formatting it. Initialize the disk by right-clicking the Device Properties Box and selecting

Initialize Disk.

d) To format the drive, right-click the Drive Properties Box and select Format.

Drive

Properties

Device

Properties

CRU

R T X 4 - b a y U s e r M a n u a l A 9 - 4 0 0 - 0 0 0 7 R E V 1 . 0 - 6 -

e) If you are prompted to select a partition type, select MBR for volumes 2TB or smaller, or GPT for

volumes larger than 2TB. Note: Windows XP does not support GPT or volumes larger than 2TB.

f) Click through several more windows, leaving the default settings, until you see a window that allows

selection of a file system. Choose NTFS and enter a name for the new volume. Be sure to check the box

labeled “Perform a quick format” unless you want to completely erase any data on the drive and have

time to wait. A quick format should take less than a minute, while standard formatting may take several

hours.

g) Click “Next” and then “Finish” to start the format process. When the format is complete, the Drive

Properties Box will update to show the new volume name. The new volume can now be found in My

Computer.

3.2.3 Mounting and ejecting volumes

If the hard drives attached to RTX are already formatted, you can begin using the volume right away.

When the unit is properly connected and turned on, a window may open to allow you access to the

volume. If no window appears, you can find the volume by double-clicking “My Computer.”

Eject RTX before powering it down by single-clicking the green arrow icon on the task bar, then selecting

“Safely remove….” Windows will indicate when it is safe to disconnect RTX. Disconnecting the unit

without first ejecting it can result in data loss.

3.2.4 Creating a Boot Drive

Some PC motherboards support booting from an external device. To activate this feature, you will need

to adjust the motherboard’s BIOS settings. Check with your motherboard’s manufacturer or owner’s

manual for details.

4. Warnings and Notices

• If your drive is inserted incorrectly it may cause damage to the internal connections. Be sure to only

insert 3.5″ SATA drives and to insert them properly. Do not eject the drive while it is being accessed.

Data loss could result.

• Do not move RTX while the drive has power.

• Although a drive can be accessed without locking the ejection handle, locking is recommended to

keep from accidentally ejecting a drive while in use. Use caution when pulling on the ejection handle

so that if it is locked you do not break the handle.

5. Frequently Asked Questions

Q: I am trying to use my RTX to boot over FireWire on my Mac and it does not see my drive during the

boot process. What is causing the problem?

A: Our products are designed to work with 3TB drives when they arrive to our customers. Some Mac's

may have FireWire chips that are not compatible with booting drives over 2.2TB. In these computers you

can disable the ability to use drives larger than 2.2TB in the enclosure if you would like to boot over

FireWire.

Q: Can you tell me why my eSATA device appears as a Parallel SCSI device in System Profiler?

A: The "Serial ATA" tab in System Profile shows devices attached to the internal SATA bus, but not

always devices attached to an eSATA host card. Sometimes these devices will appear under the heading

"Parallel SCSI" instead. This is entirely normal and does not indicate a problem with the device or its

drivers.

CRU

R T X 4 - b a y U s e r M a n u a l A 9 - 4 0 0 - 0 0 0 7 R E V 1 . 0 - 7 -

Q: Why is my hard drive experiencing data corruption?

A: Many things can cause data corruption on hard drives, whether they are inside your computer or inside

an external storage product. Malicious software, OS bugs, failure to properly disconnect external devices,

or no reason at all. Data corruption or loss is therefore not covered by warranty (this is the case with all

rational companies in the storage industry).

The first thing to try is restarting both the computer and the external device. If the data is still corrupted,

try running built-in OS utilities (such as Mac OS X's Disk Utility First Aid) on the hard drive. For best

results, boot your computer with a Mac OS X Installation CD, and launch Disk Utility from the CD. When

you reach the Mac OS Installation program, you can run Disk Utility from one of the menus at the top of

the screen. From Disk Utility, you can run "Verify Disk" and "Repair Disk" to find and fix any errors that

may be present in your Mac OS installation.

If the OS utility doesn't help, you may need Data Rescue. This is a great solution for recovering lost data

from a hard drive which has suffered data loss or corruption. If there is a true hardware failure of your

hard drive that prevents it from communicating with your computer, there is no software solution in

existence that can fix this problem. However, since we cannot tell you with any certainty whether or not

you are experiencing hardware failure in your particular hard drive, we would encourage you to download

a free demo version of ProSoft’s Data Rescue from www.prosofteng.com. It is limited, in that it only allows

you to recover one file per session, but it will tell you if it even sees any files.

Q: I just connected my eSATA product to my computer for the first time. I turned on the power, but the

drive did not spin up. Is the drive dead?

A: SATA drives will not power up if a SATA cable is plugged into them, but no valid connection is

established with a host. To test this, unplug the SATA cable, but leave the power plugged in. If the drive

spins up in this configuration, then the problem can be attributed to the SATA host (i.e. eSATA host card).

Q: Can I hot-swap drives with this product?

A: Only if the eSATA/SATA host supports this feature. All eSATA host cards currently sold by CRU-

WiebeTech support hot swapping. Third-party host cards may or may not support this feature.

Q: It is possible to boot to the external drive(s) in this product?

A: Only if that feature is supported by the eSATA host to which you are connecting. Many eSATA hosts

do not support booting. If this feature is important to you, you should read the technical specifications of

any host card you're considering to make sure it supports booting.

Q: Why won't the computer let me eject or unmount my drive?

A: There may be a software application running in the background with an active link to the drive.

Sometimes, you may see a message such as "The disk is in use and could not be ejected. Try quitting

applications and try again."

It could be a background application like Sherlock or the Finder. This is not a defect or issue caused by

the WiebeTech device. Try invoking the Force Quit feature in OS X to see what software may be running.

For Windows XP, the equivalent command is CTRL-ALT-DEL.

Drives connected to the computer via eSATA cannot be ejected in Windows the way FireWire drives can.

However, freeware utilities are available on the internet that provide a similar function.

Q: Can I access drives formatted NTFS on my Mac?

A: Mac OS 10.3 or higher allows drives formatted in NTFS to mount and be seen as read-only volumes.

Data may not be written to the drives, but it may be copied from the drives.

CRU

R T X 4 - b a y U s e r M a n u a l A 9 - 4 0 0 - 0 0 0 7 R E V 1 . 0 - 8 -

Tested to comply

with FCC standards

FOR OFFICE OR COMMERCIAL USE

6. Technical Specifications

Product name

RTX400H-SV , RTX410-3QJ, RTX410-3SJ, RTX410-XJ

Interface Types

• RTX “SV” models: single port-multiplied eSATA

• RTX “3QJ” models: FireWire 800 (400 compatible), eSATA, USB 3.0

• RTX “3SJ” models: eSATA and USB 3.0

• RTX “XJ” models: SFF-8088 multi-lane SAS/SATA 6Gbps

Drive Types Supported

3.5” SATA hard drives

Support for Drives over

2 Terabytes

Yes

LED

Power/HDD Activity

Operating System

Requirements

Windows 7, Vista, XP

Mac OS X

Linux distributions that support the desired connection type

Power Switch

2 position: On / Off

Power Supply

Input: 100-240VAC; Output: +12V / +5V

Compliance

CE/FCC, ROHS

Product Weight

18 pounds without drives, 24 pounds with drives

Dimensions

270mm x 177mm x 231mm

Support

We don’t expect anything to go wrong with your CRU product. But if it does, Tech Support is

standing by and ready to help. Contact us through www.cru-dataport.com/support

or wiebetech.com/techsupport. WiebeTech is a brand of CRU.

We also offer phone support at (800) 260-9800 and (866) 744-8722.

Other marks are the property of their respective owners.

Limited Product Warranty

CRU-DataPort (CRU) warrants RTX to be free of significant defects in material and workmanship for a period of one year from the

original date of purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.

Limitation of Liability

The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but

not limited to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights

with respect to the documentation and hardware. No CRU dealer, agent or employee is authorized to make any modification,

extension, or addition to this warranty. In no event will CRU or its suppliers be liable for any costs of procurement of substitute

products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect, consequential, or

incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has

been advised of the possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products at

issue. CRU reserves the right to make modifications and additions to this product without notice or taking on additional liability.

FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.”

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this own

expense.

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:

1) Ensure that the case of your attached drive is grounded.

2) Use a data cable with RFI reducing ferrites on each end.

3) Use a power supply with an RFI reducing ferrite approximately 5 inches

from the DC plug.

4) Reorient or relocate the receiving antenna

CRU Dataport RTX410-XJ User manual

Brand: CRU Dataport

Model: RTX410-XJ

Category: HDD/SSD enclosures

Type: User manual

This manual is also suitable for

Download PDF

report

CRU Dataport RTX410-XJ User manual

This manual is also suitable for

CRU Dataport RTX410-XJ User manual

Related papers

Other documents