Acer Ferrari 3400 User manual

Page is loading ...

熟悉您的電腦

10

繁

體

中

文

功能特色

執行效能

• 行動型 AMD Athlon

TM

64 處理器

• 雙記憶體插槽，可升級為 2 GB。

• 高容量的 Enhanced-IDE 規格硬碟

• 鋰電池組

• Microsoft® Windows® XP 作業系統

顯示器

• 薄膜電晶體 (TFT：Thin-Film Transistor) 液晶顯示器 (LCD;Liquid

Crystal Display) 可顯示 32-bit 的全彩，解析度在 15.0 英吋上可達

1400 x 1050 Super eXtended Graphics Array (SXGA+)

• 3D 能力

• ATI MOBILITY

TM

RADEON

TM

9700( 內建 128 MB 記憶體 )

• 支援 LCD 及 CRT 同步顯示器

• S 視訊，可輸出至電視或有支援 S 視訊輸入的顯示裝置

• 「自動 LCD 調暗」功能，可自動地決定您顯示器亮度的最佳設定，及

節省電源

• DualView

TM

雙重顯示功能

多媒體功能

• AC'97 立體聲喇叭

• 內建式雙喇叭

• 內建式麥克風

• 高速光碟機

• 內建多用型 DVD 光碟燒錄機 ( DVD Super Multi)

• 15.0 英吋 TFT SXGA+ (1400x1050 解析度 ) 面板

• 音訊輸入和輸出端子

連接性

• 高速傳真 / 資料數據機連接埠

• 超高速乙太網路埠 (GbE; Gigabit Ethernet)

Page is loading ...

熟悉您的電腦

18

繁

體

中

文

歐元符號

如您的鍵盤配置是設為 United States-International 或 United Kingdom

或是如果您有個歐語配置的鍵盤，您就可以透過您的鍵盤，輸入歐元符號。

US 鍵盤使用者注意：鍵盤配置在您第一次設定 Windows 時就設定完

成了。要使用歐元符號，鍵盤配置必須設定為 United States-

International。

要檢查鍵盤型態：

1 按一下「開始」、「控制台」。

2 快速按兩下「地區及語系選項」。

3 按一下「語系」標籤及「詳細」選項。

4 檢查鍵盤配置是否使用「En English (United States)」，若是即表示設

為「United States-International」。

如果不是，請選按「新增」，再選擇「United States-

International」，之後再按一下「確定」。

5 按一下「確定」。

要輸入歐元符號時：

1 在鍵盤上找到歐元符號。

2 開啟文字編輯程式或文書編輯軟體。

3 按住 Alt Gr 並按一下歐元符號。

注意 : 某些字型及軟體不支援歐元符號。詳情請參閱

www.microsoft.com/typography/faq/faq12.htm

內容。

Page is loading ...

軟體

62

繁

體

中

文

4 接著，將會顯示「The system has password protection. Please

enter 000000: 」訊息。

5 請連續輸入六個數字 0 (000000) 並繼續。

6 接著，「Acer Self-Configuration Preload 」視窗將出現。

7 請使用箭頭鍵移動至您想要的選項 ( 作業系統版本 ) 並按 Enter 鍵確認

選擇。

設定密碼並結束

當「Acer Self-Configuration Preload 」視窗出現時，請按 <F3> 鍵設定

密碼，或是按 <F5> 鍵結束系統回復作業。

如果是按下 <F3> 鍵，下個視窗將會顯示「Please enter new

password: 」，請輸入 1 ~ 8 個英數字元。系統將會要求您再次輸入密碼以

確認，然後再繼續。

螢幕將會顯示「Password has been created. Press any key to reboot... 」

訊息，請按任何鍵以重新啟動系統。

如果是按下 <F5> 鍵，回復作業將會被中止，而系統將會重新啟動並且正常

開機。

重要：此功能在您硬碟的隱藏磁碟分割中佔了 2 GB 的空間。

Page is loading ...

附錄 B 注意事項

82

繁

體

中

文

注意事項 ( 適用於紐西蘭 )

For Modem with approval number PTC 211/03/008

1 The grant of a Telepermit for any item of terminal equipment

indicates only that Telecom has accepted that the item complies

with minimum conditions for connection to its network. It

indicates no endorsement of the product by Telecom, nor does it

provide any sort of warranty. Above all, it provides no assurance

that any item will work correctly in all respects with another item

of Telepermitted equipment of a different make or model, nor

does it imply that any product is compatible with all of Telecom's

network services.

2 This equipment is not capable, under all operating conditions, of

correct operation at the higher speeds for which it is designed.

Telecom will accept no responsibility should difficulties arise in

such circumstances.

3 Some parameters required for compliance with Telecom's

Telepermit requirements are dependent on the equipment (PC)

associated with this device. The associated equipment shall be set

to operate within the following limits for compliance with

Telecom's Specifications:

a There shall be no more than 10 call attempts to the same

number within any 30 minute period for any single manual

call initiation, and

b The equipment shall go on-hook for a period of not less than

30 seconds between the end of one attempt and the

beginning of the next call attempt.

4 Some parameters required for compliance with Telecom's

Telepermit requirements are dependent on the equipment (PC)

associated with this device. In order to operate within the limits

for compliance with Telecom's specifications, the associated

equipment shall be set to ensure that automatic calls to different

numbers are spaced such that there is not less than 5 seconds

between the end of one call attempt and the beginning of

another.

5 This equipment shall not be set up to make automatic calls to

Telecom's 111 Emergency Service.

83

繁

體

中

文

For Modem with approval number PTC 211/01/030

1 The grant of a Telepermit for any item of terminal equipment

indicates only that Telecom has accepted that the item complies

with minimum conditions for connection to its network. It

indicates no endorsement of the product by Telecom, nor does it

provide any sort of warranty. Above all, it provides no assurance

that any item will work correctly in all respects with another item

of Telepermitted equipment of a different make or model, nor

does it imply that any product is compatible with all of Telecom's

network services.

2 This equipment is not capable, under all operating conditions, of

correct operation at the higher speeds for which it is designed.

Telecom will accept no responsibility should difficulties arise in

such circumstances.

3 This device is equipped with pulse dialing while the Telecom

standard is DTMF tone dialing. There is no guarantee that Telecom

lines will always continue to support pulse dialing.

4 Use of pulse dialing, when this equipment is connected to the

same line as other equipment, may give rise to bell tinkle or noise

and may also cause a false answer condition. Should such problems

occur, the user should NOT contact the telecom Fault Service.

5 This equipment may not provide for the effective hand-over of a

call to another device connected to the same line.

6 Under power failure conditions this appliance may not operate.

Please ensure that a separate telephone, not dependent on local

power, is available for emergency use.

7 Some parameters required for compliance with Telecom's

Telepermit requirements are dependent on the equipment (PC)

associated with this device. The associated equipment shall be set

to operate within the following limits for compliance with

Telecom's specifications, the associated equipment shall be set to

ensure that calls are answered between 3 and 30 seconds of

receipt of ringing.

8 This equipment shall not be set up to make automatic calls to

Telecom's 111 Emergency Service.

Page is loading ...

89

繁

體

中

文

Acer Incorporated

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih

Taipei Hsien 221, Taiwan

Tel : 886-2-2696-1234

Fax : 886-2-2696-3535

www.acer.com

Declaration of Conformity for CE marking

We,

Acer Inc.

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih,

Taipei Hsien 221, Taiwan

Contact Person: Mr. Easy Lai

Tel: 886-2-8691-3089 Fax: 886-2-8691-3000

E-mail: [email protected]

Hereby declare that:

Product: Notebook PC

Trade Name: Acer

Model Number: ZI5

Machine Type: Ferrari 3400

SKU Number: Ferrari 340xxx

(“x” = 0~9, a ~ z, or A ~ Z)

Is in compliance with the essential requirements and other relevant provisions of the

following EC directives.

Reference No. Title

89/336/EEC Electromagnetic Compatibility (EMC directive)

73/23/EEC Low Voltage Directive (LVD)

1999/5/EC Radio & Telecommunications Terminal Equipment Directive (R&TTE)

The product specified above was tested conforming to the applicable Rules under the most

accurate measurement standards possible, and that all the necessary steps have been taken

and are in force to assure that production units of the same product will continue to comply

with the requirements.

2004/7/16

--------------------------- ------------------

Easy Lai/ Director Date

Qualification Center

Product Assurance, Acer Inc.

附錄 B 注意事項

90

繁

體

中

文

Federal Communications Commission

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

The following local Manufacturer /Importer is responsible for this declaration:

Product: Notebook Personal Computer

Model Number: ZI5

Machine Type:

Ferrari 3400

SKU Number: Ferrari 340xxx

(“x” = 0~9, a ~ z, or A ~ Z)

Name of Responsible Party: Acer America Corporation

Address of Responsible Party: 2641 Orchard Parkway, San Jose

CA 95134, U. S. A.

Contact Person: Mr. Young Kim

Phone No.: 408-922-2909

Fax No.: 408-922-2606

Acer Ferrari 3400 User manual

Related papers

Other documents