LG L6323-BP User guide

Brand: LG

Model: L6323-BP

Category: Security cameras

Type: User guide

OWNER'S MANUAL

Color Video Camera

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

L6323 series

L6323-BP

L6323-BN

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

dangerous voltage within the product’s enclo-

sure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and mainte-

nance (servicing) instructions in the literature

accompanying the product.

FCC WARNING: This equipment may generate or use radio

frequency energy. Changes or modifications to this equip-

ment may cause harmful interference unless the modifica-

tions are expressly approved in the instruction manual. The

user could lose the authority to operate this equipment if

an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference when the

equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio fre-

quency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interfer-

ence to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

t A suitable conduit entries, knock-outs or glands shall

be provided in the cable entries of this product in the

end user.

t Caution: Danger of explosion if battery is incorrectly

replaced. Replaced only with the same or equivalent

type recommended by the manufacturer. Dispose

of used batteries according to the manufacturer’s

instructions.

t Holes in metal, through which insulated wires pass,

shall have smooth well rounded surfaces or shall be

provided with brushings.

This Class A digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe A est conforme à la

norme NMB-003 du Canada.

Warning: Do not install this equipment in a confined space

such as a bookcase or similar unit.

Warning: Wiring methods shall be in accordance with the

National Electric Code, ANSI/NFPA 70.

Warning: This is a class A product. In a domestic environ-

ment this product may cause radio interference in which

case the user may be required to take adequate measures.

Warning: To reduce a risk of fire or electric shock, do not

expose this product to rain or moisture.

Caution: This installation should be made by a qualified

service person and should conform to all local codes.

Caution: To avoid electrical shock, do not open the cabi-

net. Refer servicing to qualified personnel only.

Caution: The apparatus shall not be exposed to water

(dripping or splashing) and no objects filled with liquids,

such as vases, shall be placed on the apparatus.

To disconnect power from mains, pull out the mains

cord plug. When installing the product, ensure that the

plug is easily accessible.

Disposal of your old appliance

1. When this crossed-out wheeled bin

symbol is attached to a product it means

the product is covered by the European

Directive 2002/96/EC.

2. All electrical and electronic products

should be disposed of separately from

the municipal waste stream via desig-

nated collection facilities appointed by

the government or the local authorities.

3. The correct disposal of your old appli-

ance will help prevent potential negative

consequences for the environment and

human health.

4. For more detailed information about

disposal of your old appliance, please

contact your city office, waste disposal

service or the shop where you pur-

chased the product.

EEE Compliance with Directive. (for Turkey only)

LG Electronics hereby declares that this/these

product(s) is/are in compliance with the essen-

tial requirements and other relevant provisions

of Directive 2004/108/EC, 2006/95/EC, and

2009/125/EC.

European representative :

LG Electronics Service Europe B.V.

Veluwezoom 15, 1327 AE Almere,

The Netherlands (Tel : +31-(0)36-547-8888)

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accor-

dance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the appa-

ratus. When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury from

tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

Important Safety Instructions

Power Supply

This camera must always be operated a AC 24 V or DC 12 V

Certified/Listed, class 2 power supply only.

Handling of the unit

Be careful not to spill water or other liquids on the unit. Be

cautious not to get combustible or metallic material inside

the body. If used with foreign matter inside, the camera is

liable to fail or to get cause of fire or electric shock.

t Remove dust or dirt on the surface of the lens with a

blower.

t Use a dry soft cloth to clean the body. If it is very dirty,

use a cloth dampened with a small quantity of neutral

detergent then wipe dry.

t Avoid the use of volatile solvents such as thinners,

alcohol, benzene and insecticides. They may damage

the surface finish and/or impair the operation of the

camera.

Operating and storage location

Avoid viewing a very bright object (such as light fittings)

during an extended period. Avoid operating or storing the

unit in the following locations.

t Extremely hot or cold places (operating temperature

-10 °C to 50 °C, however, we recommend that the unit

be used within a temperature range of 0 °C to 45 °C)

t Damp or dust place

t Places exposed to rain

t Places subject to strong vibration

t Close to generators of powerful electromagnetic radia-

tion such as radio or TV transmitters.

Cautions for Safe Operation

Features ............................................................................. 8

Accessories ..................................................................................8

Part Names and Functions ............................................... 9

Connections .................................................................... 11

Basic connection .....................................................................11

Connecting RS-485 device ..................................................11

Installation ...................................................................... 12

Mounting the Camera ...........................................................12

Wall mount (Optional) ..........................................................16

Pendant mount (Optional) ..................................................18

Image Adjustment .................................................................20

Menu Operation.............................................................. 23

OSD Menu Overview .............................................................24

General Operation ..................................................................27

Camera Identication Settings ..........................................28

Exposure Settings ...................................................................28

WDR/BLC setting ...........................................................29

Brightness setting .........................................................30

AGC (Automatic Gain Control) setting ..................30

SHUTTER (Shutter Speed) setting ...........................31

SENS-UP setting ............................................................31

White Balance settings .........................................................32

Day/Night Setting ..................................................................34

Motion Detection Setting ....................................................35

3D-DNR Setting .......................................................................36

Privacy Setting .........................................................................37

Special Menu Settings ..........................................................39

Setting the D-ZOOM (Digital Zoom ) level .........39

Setting the D-EFFECT (Digital eect) ....................40

Setting the SHARPNESS eect .................................40

Setting the COLOR eect ..........................................41

STABILIZER setting ........................................................41

Setting the SYNC (Synchronization) ......................42

Setting the USER TITLE ................................................42

Language Setting .........................................................43

Reset Settings.................................................................44

RS-485 Protocol .............................................................. 45

Specication ................................................................... 46

Contents

Features

This Color Video Camera is designed for installation in a

video surveillance system.

This manual contains instructions on how to install and

manage the Color Video Camera in your video surveillance

system.

Should you require any technical assistance, please contact

authorized service center.

t High resolution and high sensitivity with a 6 mm CCD.

t Day & Night function.

t BLC covers various light conditions.

t Excellent signal-to-noise ratio of 50 dB.

t Weather Proof: IP66 Rating.

t Dome Cover : Vandal -Proof.

Accessories

Installation sticker

Camera mounting

bracket

Wrench

M4 Fixing screws

a Dome Cover Ring

b Dome Cover

c Lens Cover

d Focus lock lever

Fixes the focus position after adjusting.

e Azimuth adjuster

Adjusts the azimuth angle to obtain a level image.

f Zoom lock lever

Fixes the zoom position after adjusting.

g Tilting lock screw

Fixes the tilting position after adjusting.

h Azimuth lock screw

Fixes the azimuth angle after adjusting.

i Video Out connector (RCA type)

Use this jack for checking the picture with portable

monitor when install the camera.

j Setup menu control buttons

Part Names and Functions

k Pan lock screw

Fixes the panning position after adjusting.

l Pan adjuster

Adjusts the pan position.

m Power input connector

Supplies AC 24 V or DC 12 V from an external power

source.

n Video output connector (BNC type)

o RS-485 Communication cable

Connect this cable to an external controller of RS-485

format.

p Camera mounting bracket

This bracket is supplied for ceiling installation.

q GORE

protective sticker / Air vent system

Do not remove the GORE

protection sticker. It helps

the flow of air to prevent moisture and condensation

inside of the camera. This air vent system helps the

product's reliability and stability so it increases the

life cycle.

Basic connection

The peripheral devices (DVR, monitor, etc.), AC/DC adapter

and cables are not supplied.

1. Make the video signal connection between the cam-

era and the monitor or DVR.

2. Connect an external power source to the power input

jack of the camera.

Connecting RS-485 device

Use these cables to connect an external controller of

RS-485 format.

Cable Color Description

White TRX-: Data Transmission/Reception

Black TRX+: Data Transmission/Reception

Connections

Mounting the Camera

You can mount the camera on a ceiling or wall.

Surface mount

Follow the instructions below to mount the camera on a

surface with supplied camera mounting bracket.

1. Use the installation guide template to check the

mounting location. Face the front of the label toward

the area of interest. Using the template as a guide,

make a hole through the ceiling.

2. Pass the connection cable through the inner side of

the ceiling.

Installation

3. Install the camera mounting bracket to the ceiling. 4. Connect the cables to the cable jacks of the camera

body.

Installation

5. Assemble the camera and mounting bracket. Connect

the unit by following step a and b.

Wall mount with optional mounting

bracket housing

Follow the instructions below to mount the camera on a

surface with optional mounting bracket housing.

1. Install the mounting bracket housing to the ceiling.

2. Fasten the camera mounting bracket to the mounting

bracket housing.

3. Connect the cables and assemble the camera and

mounting bracket housing. Connect the unit by

following step a and b.

Installation

Wall mount (Optional)

Follow the instructions below to install the camera with a

wall mount.

1. Drill holes in the wall where you want to install the

wall mount.

2. Install the wall mount installation bracket.

3. Install the wall mount assembly as shown below.

Installation

4. Connect the cables to the camera jacks. 5. Attach the camera to the wall mount assembly.

Pendant mount (Optional)

Follow the instructions below to install the camera with a

pendant mount.

1. Drill holes in the wall where you want to install the

pendant mount.

2. Pass the connection cable through the pendant

mount assembly so that they hang down.

3. Install the pendant mount assembly.

4. Connect the cables to the camera jacks. 5. Attach the camera to the pendant mount assembly.

Image Adjustment

You can manually adjust the pan/tilt/azimuth angles, focus,

and zoom while observing the connected monitor.

Notes:

t Do not hold the camera by lens unit to adjust panning,

tilting, or azimuth.

t The video output to the BNC will be interrupted while

a portable monitor is connected to the video jack.

1. Disassemble the dome cover ring. Use the supplied

wrench to loosen the screws and then remove the

dome cover and lens cover.

2. Connect a portable monitor to the video jack.

Installation

Page is loading ...

LG L6323-BP User guide

Brand: LG

Model: L6323-BP

Category: Security cameras

Type: User guide

Download PDF

report

LG L6323-BP User guide

LG L6323-BP User guide

Related papers

Other documents