CAME LT001 Owner's manual

Type
Owner's manual

CAME LT001

The CAME LT001 is a reader of magnetic swipe cards (TST02) designed to work only with the RBM2 and RBM8 control units. The power supply and programming of this device is assigned to these units.

The LT001 has a working time of -10 ÷ 55°C and a magnetic head life of 300,000 passes minimum. It has an IP40 rating, so it should not be mounted outside.

The Magnetic Card (TST02) formats are ISO7810/7813, track 2. The IC type is RF/64 ASK Manchester, the frequency is 125kHz, and the working time is -35 ÷ 50°C.

CAME LT001

The CAME LT001 is a reader of magnetic swipe cards (TST02) designed to work only with the RBM2 and RBM8 control units. The power supply and programming of this device is assigned to these units.

The LT001 has a working time of -10 ÷ 55°C and a magnetic head life of 300,000 passes minimum. It has an IP40 rating, so it should not be mounted outside.

The Magnetic Card (TST02) formats are ISO7810/7813, track 2. The IC type is RF/64 ASK Manchester, the frequency is 125kHz, and the working time is -35 ÷ 50°C.

SERIE TCA |
TCA SERIES
|
SÉRIE TCA |
BAUREIHE TCA
|
SERIE TCA |
SERIE TCA
LT001
CANCELLI AUTOMATICI
LETTORE PER TESSERE A STRISCIAMENTO
READER FOR SWIPE CARDS
LECTEUR (PAR FROLEMENT) POUR CARTES
LESER FÜR DURCHZUSTREIFENDE MAGNETKARTEN
LECTOR PARA TARJETAS POR CONTACTO
MAGNEETKAART-LEZER
Documentazione
Tecnica
T04
rev. 0.1
01/2002
©
CAME
CANCELLI
AUTOMATICI
119RT04
SERIE TCA |
TCA SERIES
|
SÉRIE TCA |
BAUREIHE TCA
|
SERIE TCA |
SERIE TCA
LT001
CANCELLI AUTOMATICI
LETTORE PER TESSERE A STRISCIAMENTO
READER FOR SWIPE CARDS
LECTEUR (PAR FROLEMENT) POUR CARTES
LESER FÜR DURCHZUSTREIFENDE MAGNETKARTEN
LECTOR PARA TARJETAS POR CONTACTO
MAGNEETKAART-LEZER
Documentazione
Tecnica
T04
rev. 0.1
01/2002
©
CAME
CANCELLI
AUTOMATICI
119RT04
ENGLISH
The LT001 is a reader of magnetic swipe
cards (TST02) designed to work only with
the RBM2 and RBM8 control units: the
power supply and programming of this
device is assigned to these units.
LT001
- Working time: -10 ÷ 55°C
- Magnetic head life: 300,000 passes
minimum
- IP40, do not mount outside
Magnetic Card (TST02)
- Formats: ISO7810/7813, track 2
- IC type: RF/64 ASK Manchester
- Frequency: 125kHz
- Working time: -35 ÷ 50°C
ESPANOL
LT001 es un lector de tarjetas magnéti-
cas por contacto (TST02) concebido para
funcionar sólo con las unidades de con-
trol RBM2 y RBM8: la alimentación y la
programación de ese dispositivo es ta-
rea de tales unidades.
LT001
- Temp. de servicio: -10 ÷ 55°C
- Duración cabezal magnético: 300.000
pasadas mínimas
- IP40, no montar en exteriores
Tarjeta magnética (TST02)
- Formatos: ISO7810/7813, pista 2
- IC type: RF/64 ASK Manchester
- Frecuencia: 125kHz
- Temp. de servicio: -35 ÷ 50°C
FRANÇAIS
LT001 est un lecteur de cartes magnéti-
ques par frôlement (TST02) conçu pour
ne fonctionner qu'avec les unités de con-
trôle RBM2 et RBM8: ces unités permet-
tent d'alimenter et de programmer le
lecteur.
LT001
- Temp. de service: -10 ÷ 55°C
- Durée de la tête magnétique: au
minimum 300.000 passages
- IP40, ne pas monter à l'extérieur
Magnetic Card (TST02)
- Formats: ISO7810/7813, trace 2
- IC type: RF/64 ASK Manchester
- Fréquence: 125kHz
- Temp. de service: -35 ÷ 50°C
DUTCH
LT001 is een magneetkaartlezer (TST02)
die enkel ontworpen is voor de werking
met de controle-eenheden RBM2 en
RBM8, daar de voeding en programme-
ring van deze inrichting gebeurt door deze
eenheden.
LT001
- Werktemperatuur: -10 ÷ 55°C
- Duur magnetische kop: minimum
300.000 passages van de kaart
- IP40, niet aan buitenkant monteren
Magnetic Card (TST02)
- Formaten: ISO7810/7813, spoor 2
- IC type: RF/64 ASK Manchester
- Frequentie: 125kHz
- Werktemperatuur: -35 ÷ 50°C
ITALIANO
LT001 è un lettore di tessere magnetiche
a strisciamento (TST02) concepito per il
funzionamento solo con le unità di con-
trollo RBM2 e RBM8: lalimentazione e la
programmazione di questo dispositivo è
demandata a tali unità.
LT001
- Temp. di esecizio: -10 ÷ 55°C
- Durata testina magnetica: 300.000
passate minimo
- IP40, non montare allesterno
Magnetic Card (TST02)
- Formati: ISO7810/7813, traccia 2
- IC type: RF/64 ASK Manchester
- Frequenza: 125kHz
- Temp. di esercizio: -35 ÷ 50°C
DEUTSCH
LT001 ist ein Leser für durchzustreifende
Magnetkarten (TST02) und zum aus-
schließlichen Gebrauch mit den Kontrol-
leinheiten RBM2 und RBM8 geplant. Die
Speisung und Programmierung dieser
Vorrichtung erfolgt durch jene Einheiten.
LT001
- Betriebstemp.: -10 ÷ 55°C
- Haltbarkeit des Magnetkopfs: mind.
300.000 Durchläufe
-
IP40, nicht draußen montieren
Magnetic Card (TST02)
- Formate: ISO7810/7813, Spur 2
- IC type: RF/64 ASK Manchester
- Frequenz: 125 kHz
- Betriebstemp.: -35 ÷ 50°C
ACCESS CONTROL
TST02
LT001
rosso |
red
| rouge
Rot
| rojo |
rood
= S1÷S4
nero |
black
| noir
Schwarz
| negro |
zwart
= GND
RBM2/RBM8
max 100 m
per aprire
to open
pour ouvrir
zum Öffnen
para abrir
om te openen
ENGLISH
The LT001 is a reader of magnetic swipe
cards (TST02) designed to work only with
the RBM2 and RBM8 control units: the
power supply and programming of this
device is assigned to these units.
LT001
- Working time: -10 ÷ 55°C
- Magnetic head life: 300,000 passes
minimum
- IP40, do not mount outside
Magnetic Card (TST02)
- Formats: ISO7810/7813, track 2
- IC type: RF/64 ASK Manchester
- Frequency: 125kHz
- Working time: -35 ÷ 50°C
ESPANOL
LT001 es un lector de tarjetas magnéti-
cas por contacto (TST02) concebido para
funcionar sólo con las unidades de con-
trol RBM2 y RBM8: la alimentación y la
programación de ese dispositivo es ta-
rea de tales unidades.
LT001
- Temp. de servicio: -10 ÷ 55°C
- Duración cabezal magnético: 300.000
pasadas mínimas
- IP40, no montar en exteriores
Tarjeta magnética (TST02)
- Formatos: ISO7810/7813, pista 2
- IC type: RF/64 ASK Manchester
- Frecuencia: 125kHz
- Temp. de servicio: -35 ÷ 50°C
FRANÇAIS
LT001 est un lecteur de cartes magnéti-
ques par frôlement (TST02) conçu pour
ne fonctionner qu'avec les unités de con-
trôle RBM2 et RBM8: ces unités permet-
tent d'alimenter et de programmer le
lecteur.
LT001
- Temp. de service: -10 ÷ 55°C
- Durée de la tête magnétique: au
minimum 300.000 passages
- IP40, ne pas monter à l'extérieur
Magnetic Card (TST02)
- Formats: ISO7810/7813, trace 2
- IC type: RF/64 ASK Manchester
- Fréquence: 125kHz
- Temp. de service: -35 ÷ 50°C
DUTCH
LT001 is een magneetkaartlezer (TST02)
die enkel ontworpen is voor de werking
met de controle-eenheden RBM2 en
RBM8, daar de voeding en programme-
ring van deze inrichting gebeurt door deze
eenheden.
LT001
- Werktemperatuur: -10 ÷ 55°C
- Duur magnetische kop: minimum
300.000 passages van de kaart
- IP40, niet aan buitenkant monteren
Magnetic Card (TST02)
- Formaten: ISO7810/7813, spoor 2
- IC type: RF/64 ASK Manchester
- Frequentie: 125kHz
- Werktemperatuur: -35 ÷ 50°C
ITALIANO
LT001 è un lettore di tessere magnetiche
a strisciamento (TST02) concepito per il
funzionamento solo con le unità di con-
trollo RBM2 e RBM8: lalimentazione e la
programmazione di questo dispositivo è
demandata a tali unità.
LT001
- Temp. di esecizio: -10 ÷ 55°C
- Durata testina magnetica: 300.000
passate minimo
- IP40, non montare allesterno
Magnetic Card (TST02)
- Formati: ISO7810/7813, traccia 2
- IC type: RF/64 ASK Manchester
- Frequenza: 125kHz
- Temp. di esercizio: -35 ÷ 50°C
DEUTSCH
LT001 ist ein Leser für durchzustreifende
Magnetkarten (TST02) und zum aus-
schließlichen Gebrauch mit den Kontrol-
leinheiten RBM2 und RBM8 geplant. Die
Speisung und Programmierung dieser
Vorrichtung erfolgt durch jene Einheiten.
LT001
- Betriebstemp.: -10 ÷ 55°C
- Haltbarkeit des Magnetkopfs: mind.
300.000 Durchläufe
-
IP40, nicht draußen montieren
Magnetic Card (TST02)
- Formate: ISO7810/7813, Spur 2
- IC type: RF/64 ASK Manchester
- Frequenz: 125 kHz
- Betriebstemp.: -35 ÷ 50°C
ACCESS CONTROL
TST02
LT001
rosso |
red
| rouge
Rot
| rojo |
rood
= S1÷S4
nero |
black
| noir
Schwarz
| negro |
zwart
= GND
RBM2/RBM8
max 100 m
per aprire
to open
pour ouvrir
zum Öffnen
para abrir
om te openen
  • Page 1 1

CAME LT001 Owner's manual

Type
Owner's manual

CAME LT001

The CAME LT001 is a reader of magnetic swipe cards (TST02) designed to work only with the RBM2 and RBM8 control units. The power supply and programming of this device is assigned to these units.

The LT001 has a working time of -10 ÷ 55°C and a magnetic head life of 300,000 passes minimum. It has an IP40 rating, so it should not be mounted outside.

The Magnetic Card (TST02) formats are ISO7810/7813, track 2. The IC type is RF/64 ASK Manchester, the frequency is 125kHz, and the working time is -35 ÷ 50°C.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI