Page is loading ...
1.Open the appliance door, unscrew screws T25 A and remove
both dummy covers B.
2.Stick foam strips C to door plate (aligned with dummy cover
opening).
A
B
C
3.Mount the front mounting plate D to front panel and screw
screws T25A back in to fix the mounting plate.
4.Put the arm E through the door mounting plate F. Important:
Do not put the arm E in the wrong way round.
A
D
E
F
F
E
5.Put the appliance door in a 90° position. Take the door
mounting plate F with the arm E inserted in it and put the end
of the arm into the front mounting plate D.
6.Mount the door mounting plate F with the arm E inserted in it
on the door and screw screws T25 A back in to fix the
mounting plate. Ensure that the arm remains engaged in the
front mounting plate D.
F
E
D
E
A F
D
With a right door opening (hinged on right), the door mounting plate F with the arm inserted in it is to be installed turned 180°
around. The appliance with the door stop is the mirror image of that shown in picture 6.
Installation instructions
J12001.506-1
Door stop 130° for niche installation
16.11.12
Tumble dryer
One-family household
1
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
V-ZUG 12004 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- italiano: V-ZUG 12004 Guida d'installazione
- français: V-ZUG 12004 Guide d'installation
- Deutsch: V-ZUG 12004 Installationsanleitung
- русский: V-ZUG 12004 Инструкция по установке
- Nederlands: V-ZUG 12004 Installatie gids
- svenska: V-ZUG 12004 Installationsguide