TF7050-M2/TF7025-M2 Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protec tion against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interfere nce will not occur in a particular ins tallatio n.
The ve ndor makes no represe ntations or warranties with respec t to the
contents here and specially disclaims any implied warranties of merchantability
o r fi tness fo r a ny purpose . F urt he r t he ve ndo r res e rves t he ri ght to rev is e t h is
publication and to make changes to the contents here without obligation to
notify any party beforehand.
D uplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be res ponsible for any mis takes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Table of Contents
Chapter 1: Introduction ............................................. 3
1.1 Be fore You Start................................................................... 3
1.2 Package Checklist................................................................ 3
1.3 Motherboard Features.......................................................... 4
1.4 Re ar Panel Conne cto rs (for TF7050-M2) ................................ 6
1.5 Rear Panel Conne ctors (for TF7025-M2)................................. 7
1.6 Motherboard Layout (for TF7050-M2)................................... 8
1.7 Mothe rboard Layout (for TF7025-M2) ................................... 9
Chapter 2: Hardware Installation............................10
2.1 Installing Central Processing Unit (CPU)...............................10
2.2 FAN Headers.......................................................................12
2.3 Installing System Memory.....................................................13
2.4 Conne ctors and Slots ............................................................15
Chapter 3: Headers & Jumpers Setup .....................17
3.1 How to Setup Jumpers..........................................................17
3.2 Detail Settings.....................................................................17
Chapter 4: RAID Functions.......................................25
4.1 Operation System................................................................25
4.2 Raid Arrays.........................................................................25
4.3 How RAID Wo rks.................................................................25
Chapter 5: OverClock Quick Guide ..........................29
5.1 T-Power Introduction...........................................................29
5.2 T-Powe r BIOS Feature .........................................................30
5.3 T-Powe r Windows Fe ature...................................................36
Chapter 6: Useful Help .............................................43
6.1 Driver Installation Note .......................................................43
6.2 Award BIOS Beep Code........................................................44
6.3 Extra Information................................................................44
6.4 Troubleshooting...................................................................46
Appendencies: SPEC In Other Language ................48
German................................................................................................48
France..................................................................................................50
Italian..................................................................................................52
Spanish ................................................................................................54
Portuguese...........................................................................................56
Polish...................................................................................................58
Russian................................................................................................60
Arabic..................................................................................................62
Japanese ..............................................................................................64
T F7050 -M2/T F7025-M2
3
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU START
Tha nk you for choosing our pro duct. Be fore yo u start installing the
mo therboa rd , plea se make sure you fo llow the instructions be low:
Prepare a dry and stable working environment with
s ufficie nt ligh ting .
Always disconnect the computer from power outlet
be fo re ope ra tion.
Befo re you take the mo the rboa rd ou t f rom a n ti-s ta tic
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avo id tou ch ing the compone nts o n mo the rboa rd o r the
rear side of the boa rd unless necessary. Hold the bo a rd
on the edge, do not try to bend or flex the board.
Do no t leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which ma y damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid a ir and wate r.
1.2 PACKAGE CHECKLIST
HDD Cable X 1
Se ria l ATA Cab le X 1
Rear I/O Panel for ATX Case X 1
User’s Ma nual X 1
Fully Setup Driver CD X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/P DI F ou t Ca ble X 1 (op tiona l)
Se ria l ATA Po we r Cab le X 1 (o ptio nal)
Motherboard Manual
4
1.3 MOT HERBOARD FEATURES
TF7050-M2 TF7025-M2
CPU
Socket AM2
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 /
Sempron processors
AMD 64 Arc hitecture enables 32 and 64 bit
computing
Supports Hyper Transport and Cool=n=Quiet
Socket AM2
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 /
Sempron processors
AMD 64 Arc hitecture enables 32 and 64 bit
computing
Supports Hyper Transport and Cool=n=Quiet
FSB
Supports up to 1 GHz Bandwidth
Support HyperTransport
Supports up to 1 GHz Bandwidth
Support HyperTransport
Chipset GeForce 7050PV/NF630a GeForce 7025/NF630a
Super I/O
ITE 8716F
Provides the most commonl
y
us e d l e
g
ac
y
Su
p
e
r
I/O functionality.
Low Pin Count Interface
Environment Control initiatives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
ITE 8716F
Provides the most commonly used legacy Super
I/O functionality.
Low Pin Count Interface
Environment Control initiatives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
Main
Memory
DDR2 DIMM Slots x 4
Max Memory Capacity 4GB
Eac h DIMM supports 256/512MB & 1GB DDR2
Dual Channel Mode DDR2 memory module
Supports DDR2 400/ 533 / 667 / 800
Registered DIMM and ECC DIMM is not
supported
DDR2 DIMM Slots x 4
Max Memory Capacity 4GB
Eac h DIMM supports 256/512MB & 1GB DDR2
Dual Channel Mode DDR2 memory module
Supports DDR2 400/ 533 / 667 / 800
Registered DIMM and ECC DIMM is not
supported
Graphics
Integrated in GeForce 7050PV/NF630a Chipset
Max Shared Video Memory is 256MB
Integrated in GeForce 7025/NF630a Chipset
Max Shared Video Memory is 256MB
IDE
Integrated IDE Controller
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
Integrated IDE Controller
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
SA TA II
Integrated Serial ATA Controller
Data transfer rates up to 3 Gb/s.
SATA Version 2.0 specification compliant.
Integrated Serial ATA Controller
Data transfer rates up to 3 Gb/s.
SATA Version 2.0 specification compliant.
LAN
Realtek RTL 8111B / 8101E (optional)
10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit
bandwidth is for RTL 8111B only)
Half / Full duplex capability
Realtek RTL 8111B / 8101E (optional)
10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit
bandwidth is for RTL 8111B only)
Half / Full duplex capability
T F7050 -M2/T F7025-M2
5
TF7050-M2 TF7025-M2
Sound
ALC888 (Ver 5.x) / ALC861VD (Ver 6.x)
7.1 channels audio out (Ver 5. x) /
5.1 channels audio out (Ver 6. x)
High Definition Audio
2 channels audio out for HDMI Audio
ALC888 (Ver 5.x) / ALC861VD (Ver 6.x)
7.1 channels audio out (Ver 5. x) /
5.1 channels audio out (Ver 6. x)
High Definition Audio
PCI s lot x2 PCI s lot x2
PCI Express x16 slot x1 PCI Express x16 slot x1
Slots
PCI Express x 1 slot x1 PCI Express x 1 slot x1
Floppy c onnector x1 Floppy c onnector x1
Printer Port c onnector x1 Printer Port c onnector x1
IDE Connector x1 IDE Connector x1
SA TA Connect or x4 SA TA C onnector x4
Front Panel Connector x1 Front Panel Connector x1
Front Audio Connector x1 Front Audio Connector x1
CD-in Connec tor x1 CD-in Connec tor x1
S/PDIF out connector x1 S/PDIF out connector x1
S/PDIF in connector (O ptional) x1 S/PDIF in connector (O ptional) x1
CPU Fan header x1 CPU Fan header x1
Sys tem Fan header x3 Sys tem Fan header x3
CMOS clear header x1 CMOS clear header x1
USB connector x3 USB connector x3
S eri al port C onnect or x1 S eri al port Connect or x1
Power Connector (24pin) x1 Power Connector (24pin) x1
On Board
Connector
Power Connector (4pin) x1 Power Connector (4pin) x1
Back Panel
I/O
PS/2 Keyboard x1
PS/2 Mouse x1
S-Video port x1
HDMI port x1
VGA port x1
LAN port x1
USB Port x4
Audio Jack (for Ver 5.x) x6
Audio Jack (for Ver 6.x) x3
PS/2 Keyboard x1
PS/2 Mouse x1
VGA port x1
DVI-D port x1
LAN port x1
USB Port x4
Audio Jack (for Ver 5.x) x6
Audio Jack (for Ver 6.x) x3
Board Size 235 mm(W) x 244 mm(L) 235 mm(W) x 244 mm(L)
Special
Features
RAID 0 / 1 / 5 / 0+1 s upport RAID 0 / 1 / 5 / 0+1 s upport
OS Support
Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS With or without notice.
Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS With or without notice.
Motherboard Manual
6
1.4 REAR PANEL CONNECTORS (FOR TF7050-M2)
X
PS/2 Mouse Port
Y
PS/2 Keyboard Port
Z S-Video TV-Out Port
Transmit a nal og vi deo sig nals to TV or an y ot her dis pla y p anels eq uip pe d with S- Vide o
input .
[ HDMI Port
The Hig h- Definition Multim edia Int erfac e ( HDMI) is an all- dig ital audio / vide o int er fac e
capa ble of tra nsmit ting unc o mpress ed s trea ms t o a n AV recei ver or a ny co mp atibl e dig ital
audi o a nd/ or vide o monitor, suc h as a dig ital tele visio n.
The HDMI a udio fu nction is n ot s upp or te d b y Win do ws 20 00 / XP.
\ D-Sub VGA Port
Transmit a nal og vi deo sig nals to co mputer monitor or an y ot her dis pla y p an els eq uip pe d
with D- S ub VGA in put .
] USB 2.0 Port x 4 ^ RJ-45 LAN Port
_ Audio Jack x 6 (for Ver 5.x) / Audio Jack x 3 (for Ver 6.x)
Port 2-Channel 4-Channel 6-Channel/8-Channel
Blue Line- In Line-In Line-In
Green Line-Out Front Sp eaker Out Front Sp eaker Out
Pink Mic In Mic In Mic In
Orange Center/ Sub woof er
Black Rear Spea ker O ut Rear Spe a ker O ut Rear Spe a ker O ut
Grey Side S pe a ker O ut
NOTE: The HDMI a udio is c urrentl y onl y s upported b y Wi ndows VIS TA.
NOTE: The G eForce 7050P V/NF6 30 a chips et uses the sa me c ha nn el to con tr ol S-Vid eo an d
D- Sub f or tr ans mitting a nal og vi deo sig nals, so th ese ports c an not work simultan eo usl y.
T F7050 -M2/T F7025-M2
7
1.5 REAR PANEL CONNECTORS (FOR TF7025-M2)
X
PS/2 Mouse Port
Y
PS/2 Keyboard Port
Z DVI-D VGA Port
The Dig ital Visual I nt er face (DVI) is a vid eo i nterf ace tr ans mitting dig ital vid eo sig nals to
dig ital displa y de vices s uch as flat pan el LCDs or dig ital pr oject or s. Th e DVI-D co nn ector
allows dig ital sig nals trans mission onl y.
[ D-Sub VGA Port
Transmit a nal og vi deo sig nals to co mputer monitor or an y ot her dis pla y p an els eq uip pe d
with D- S ub VGA in put .
\ USB 2.0 Port x 4 ] RJ-45 LAN Port
^ Audio Jack x 6 (for Ver 5.x) / Audio Jack x 3 (for Ver 6.x)
Port 2-Channel 4-Channel 6-Channel/8-Channel
Blue Line- In Line-In Line-In
Green Line-Out Front Sp eaker Out Front Sp eaker Out
Pink Mic In Mic In Mic In
Orange Center/ Sub woof er
Black Rear Spea ker O ut Rear Spe a ker O ut Rear Spe a ker O ut
Grey Side S pe a ker O ut
Motherboard Manual
8
1.6 MOTHERBOARD LAYOUT (FOR TF7050-M2)
JK BM S1
JTVOUT1
JHDMI
VGA
JUSB1
JUSBLAN1
JAUDIO2
(for Ver 5.x)
JAUDIOF1
Codec
JCDI N1
Super I/ O
JP R NT1
JCOM1
JUSB2 JU S B3 JU S B4
JSFAN1
JSFA N 2
J PAN EL1
PWR SW1 RS TS W1
SA TA 3 SA TA 4
SA TA 2SATA1
BIOS
FDD1
IDE1
JATX PW R 1
DI M MA1
DI M MB1
DI M MB2
DI M MA2
JC FAN 1
Socket A M2
GeF or ce
7050PV/
aNF630
LAN
JNFAN1
PCI1
PCI2
PE X1 _1
PEX16_1
JSPDIF_OUT1JSPDIF_I N1
BAT1
JCMOS1
JATXPWR2
LED_D1
LED_D2
JU SB V1
JU S BV2
JA U DI O 1
(f or Ver 6.x)
Not e: represents the 1■
st
pin.
T F7050 -M2/T F7025-M2
9
1.7 MOTHERBOARD LAYOUT (FOR TF7025-M2)
JKB M S1
VGA
JUSB1
JUSBLAN1
JAUDIO2
(for Ver 5.x)
JAUDIOF1
Codec
JCDIN1
Super I/O
JPR NT1
JC OM1
JUSB2 JU S B3 JU S B4
JSFAN1
JS FAN 2
J PAN EL1
PWRSW1 RS TSW1
SA TA 3 S ATA 4
SA TA 2SATA1
BIOS
FDD1
IDE1
JATXPWR1
DI M MA1
DI M MB1
DI M MB2
DI M MA2
JCFAN1
Socket A M2
GeF or ce
702 5 /
aNF630
LAN
JNFAN1
PCI1
PCI2
PE X1 _1
PEX16_1
JSPDIF_O UT1JSPDI F_IN1
BAT1
JCMOS1
JAT XP WR 2
LED_D1
LED_D2
J U SB V1
JU S BV2
JA U DI O 1
(for Ver 6. x)
DVI-D
Not e: represents the 1■
st
pin.
Motherboard Manual
10
CHAPTER 2: HARDWARE INSTALLATION
2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)
Step 1: Remove the socket protection cap.
Step 2: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 3: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.
T F7050 -M2/T F7025-M2
11
Step 4: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN1. This completes the installation.
Motherboard Manual
12
2.2 FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Header
Pin
Assignment
1 Ground
2 +12V
3
FAN RPM rate
sense
1
4
4 Smart Fan
Control (By Fan)
JNFAN1: North Bridge Fan Header
JSFAN1/JSFAN2: System Fan Header
Pin
Assignment
1 Ground
2 +12V
13
JSFAN2
1
3
JNFAN1
JSFAN1
1
3
3 FAN RPM
rate sense
Note:
The JCFAN1 su pp or ts 4-pin he ad c onnect or. The J SFAN1/JSFAN2 an d JNFAN1
supp or t 3-pi n hea d conn ector s. When co nnec ting wit h wir es onto co nnec tors, pleas e
not e that the r ed wir e is th e p ositive and should be con nec ted to pin #2, a nd t he blac k
wir e is Gro un d a nd s ho uld be c on nect ed to GND.
T F7050 -M2/T F7025-M2
13
2.3 INST ALLING SYSTEM MEMORY
A. Memory Modules
DIMMA1
DIMMB1
DIMMA2
DIMMB2
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
Motherboard Manual
14
B. Mem ory Capacity
DIMM Socket
Location
DDR2 Module
To t a l Me m o r y
Size
DIMMA1 256MB/512MB/1024MB
DIMMB1 256MB/512MB/1024MB
DIMMA2 256MB/512MB/1024MB
DIMMB2 256MB/512MB/1024MB
Max is 4GB.
C. D ual Channel Memory in stallation
To trigger the Dual Channel f unction of the motherboard, the memory module
must meet the following requirements:
Install memory module of the same density in pairs, shown in the f ollowing table.
Dual Channel Status
DI MMA1
DI MMB 1 DI MMA2 DI MMB2
Enabled O O X X
Enabled X X O O
Enabled O O O O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
T F7050 -M2/T F7025-M2
15
2.4 CONNECTORS AND SLOTS
FDD1: Floppy Di sk Connector
The motherboard prov ides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the
prov ided f loppy drive ribbon cables.
133
234
ID E1: Hard Disk C onne ctor
The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.
The IDE connector can connect a master and a slave drive, so y ou can connect
up to two hard disk driv es.
21
3940
Motherboard Manual
16
PEX16_1: PCI-Express x16 Slot
- PCI-Express 1.0a compliant.
- Maximum theoretical realized bandwidth of 4GB/s simultaneously per
direction, f or an aggregate of 8GB/s totally.
PEX1_1: PCI-Express x1 slots
- PCI-Express 1.0a compliant.
- Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total.
- PCI-Express supports a raw bit-rate of 2.5GB/s on the data pins.
- 2X bandwidth ov er the traditional PCI architecture.
PEX1_1
PEX16_1
PCI1~PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands f or
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
T F7050 -M2/T F7025-M2
17
CHAPTER 3: HEADERS & JUM PERS SETUP
3.1 HOW T O SET UP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened Pin closed Pin1-2 closed
3.2 DET AIL SET T IN GS
JPANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep
button and speaker connection. It allows user to connect the PC case’s f ront
panel switch functions.
1
8
16
SLP
PWR_LED
On/Off
RST
HL ED
SPK
++
+
9
-
-
Pin Assignment Functio n Pin Assignment Functio n
1 +5V 9 Sleep control
2 N/A 10 Ground
Sleep button
3 N/A 11 N/A N/A
4 Speaker
Speaker
Connector
12 Power LED (+)
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)
Hard drive
LED
14 Power LED (-)
Power LED
7 Ground 15 Power button
8 Reset control
Reset button
16 Ground
Power-on button
Motherboard Manual
18
J ATXPW R1 : ATX P o we r S ou rce C onne cto r
This connector allows user to connect 24-pin power connector on the ATX
power supply.
1
12
13
24
Pin Assignment Pin Assignment
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V
J ATXPW R2 : ATX P o we r S ou rce C onne cto r
By connecting this connector, it will provide +12V to CPU power circuit.
Pin
Assignment
1 +12V
2 +12V
3 Ground
1
3
2
4
4 Ground
T F7050 -M2/T F7025-M2
19
JUSB2/JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC f ront panel,
and also can be connected with internal USB devices, like USB card reader.
Pin Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
8 Ground
9 Key
10 NC
1
2
9
10
JUSB2
JUSB3
JUS B4
J USB V1 /J USB V2: Po we r So urce Hea de rs f o r USB P o rts
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JUSB1/JUSBLAN1.
JUSBV2: +5V for USB ports at f ront panel (JUSB2/JUSB3/JUSB4).
Pin 2-3 Close:
JUSBV1: USB ports at JUSB1/JUSBLAN1 are powered by +5V standby
v oltage.
JUSBV2: USB ports at front panel (JUSB2/JUSB3/JUSB4) are powered by
+5V standby voltage.
31
1
3
Pin 1-2 close
JUSBV1
JUSBV2
1
1
3
3
3
1
1
3
Pin 2-3 close
Note:
In ord er to s up port this f unctio n “P ower-On s yst em vi a USB de vic e,” “JUSBV1 / JUSB V2”
jump er cap sh ould be plac ed on Pin 2-3 in di vidu all y.
Motherboard Manual
20
SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4 channels SATA interf ace.
Pin
Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
147
SA TA 1
SATA2 SATA4
SATA3
7 Ground
JAUDIO F1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC f ront
panel. It will disable the output on back panel audio connectors.
Pin Assignment
1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
6 Jack Sense
7 Front Sense
8 Key
9 Left line in
10 Jack Sense
1
9
2
10
JCDIN1: CD-RO M Audio-in Connector
This connector allows user to connect the audio source f rom the v ariaty dev ices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc..
Pin
Assignment
1 Left Channel
Input
2 Ground
3 Ground
14
4 Right Channel
Input
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/