Hampton Bay 23WM9083-PM92, 73702/23WM9083-PM92 User manual

  • Hello! I am an AI chatbot trained to assist you with the Hampton Bay 23WM9083-PM92 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ATTENTION
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL
OR CALL CUSTOMER SERVICE BEFORE YOU RETURN
THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED.
For Customer Service: email: par[email protected]
in English Call: 866-661-1218
in Spanish Call: 866-661-1218
in French Call: 866-374-9203
ATENCIÓN
SI TIENE ALGÚN PROBLEMA O PREGUNTAS,
ENVÍE UN MENSAJE DE CORREO ELECTRÓNICO O LLAME AL SERVICIO
DE ATENCIÓN AL CLIENTE ANTES DE DEVOLVER
ESTE PRODUCTO A LA TIENDA EN LA QUE LO COMPRÓ.
Servicio de atención al cliente: Correo electrónico: par[email protected]
Línea para llamadas en inglés: 866-661-1218
Línea para llamadas en español: 866-661-1218
Línea para llamadas en francés: 866-374-9203
STOP
STOP
PARE
PARE
ATTENTION
SI VOUS AVEZ DES PROBLÈMES OU QUESTIONS,
ENVOYEZ UN COURRIEL AU SERVICE À LA CLIENTÈLE OU APPELEZ LE
SERVICE À LA CLIENTÈLE AVANT DE RETOURNER
CE PRODUIT OÙ VOUS L’AVEZ ACHETÉ.
Pour le service à la clientèle : courriel : par[email protected]
pour le service en anglais, composez le 866-661-1218
pour le service en espagnol, composez le 866-661-1218
pour le service en français, composez le 866-374-9203
ARRÊT
ARRÊT
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION À L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION À L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
1
ELECTRIC FIREPLACE
73702/23WM9083-PM92
INSTRUCTION MANUAL
In English call: 866-661-1218
In French call: 866-374-9203
In Spanish call: 866-661-1218
For Customer Service:
Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China
Printed in China
Español p.15
TABLE OF CONTENTS
Important Information....................................................................................................................... 2
Product Speci cations..................................................................................................................... 3
Package Contents........................................................................................................................... 4
Hardware Contents.......................................................................................................................... 5
Safety Information............................................................................................................................. 5
Preparation....................................................................................................................................... 6
Assembly Instruction........................................................................................................................ 6
Operating Instructions...................................................................................................................... 9
Care and Maintenance..................................................................................................................... 11
Troubleshooting............................................................................................................................... 12
Warranty.......................................................................................................................................... 13
Replacement Parts List.................................................................................................................. 14
Please register your new
Fireplace on-line at
www.twinstarhome.com/warranty
红底白字 45*23mm
2
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any question regarding the product, please call customer service at
1-866-661-1218, 8 a.m.-8 p.m., EST, Monday-Friday.
When using electrical appliances, always follow basic precautions to reduce the risk of re,
electrical shock, and injury to persons including the following:
1. Read all instructions before using this appliance.
2. This appliance is hot when in use. To avoid burns, do not touch hot surfaces with bare skin.
If provided, use handles when moving this appliance. Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes and curtains at least 3 ft. (0.9 m) from the front of this appliance.
WARNING: In order to avoid overheating, do not cover the heater.
WARNING: Use extreme caution when operating heater near children and the disabled.
3. The appliance is not to be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction.
4. This appliance is not a toy. Supervise children playing near it.
5. If possible, always unplug this appliance when not in use.
6. Do not operate any heater with a damaged cord or plug, after the appliance malfunctions, or if it has
been dropped or damaged in any manner.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
quali ed persons in order to avoid a hazard.
8. Only a quali ed service person should repair this product.
9. Under no circumstances should this replace be modi ed. Parts having to be removed for servicing
must be replaced prior to operating this replace again.
10. Do not use outdoors.
11. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never
locate this appliance where it may fall into a bathtub or other water container.
12. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord
away from traf c areas and where it will not be tripped over.
13. To disconnect this appliance, turn controls to the off position, and then remove plug from outlet.
14. Connect to properly grounded outlets only.
15. This appliance, when installed, must be electrically grounded in accordance with local codes or, in
the absence of local codes, with the current CSA C22.1 Canadian Electrical Code or for U.S.A.
installations, follow local codes and the National Electrical Code, ANSI/NFPA NO.70.
16. The heater must not be located immediately below a socket-outlet.
17. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause
an electric shock or re, or damage the appliance.
18. To prevent a possible re, do not block air intakes or exhaust in any manner. Do not use on soft
surfaces, like a bed, where opening may become blocked.
19. This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline,
paint or ammable liquids are used or stored. This replace should not be used as a drying rack for
clothing. Do not hang Christmas stockings or other decorations on or near this product.
20. Use this appliance only as described in the manual. Any other use not recommended by the
manufacturer may cause re, electric shock or injury to persons.
21. There is a thermostat limiter inside the heater. When inner temperature overheating or abnormal
heating occurs, the thermostat protective device will cutoff the power supply to avoid damage to the
replace or risk of re.
IMPORTANT INFORMATION
3
B
A
C
D
Grounding Pin
Fig. 1
IMPORTANT INFORMATION
Metal
Screws
Grounding
Means
SAVE THESE
INSTRUCTIONS
22. Avoid the use of an extension cord because the extension cord may overheat and cause risk of re.
However, if you have to use an extension cord, the cord must be No.14 AWG minimum size and rated
not less than 1875 watts. The extension cord must be a three-wire cord with grounding type plug and
cord connection. The extension cord shall not be more than 20 ft. (6 m) in length.
23. See directions in Figure 1. This heater is for use on 120 volts. The cord has a plug as shown in
gure 1. See Figure 1 for grounding instruction. An adapter as shown at C is available for
connecting three-blade grounding type plugs to two-slot receptacles. The green grounding plug
extending from the adapter must be connected to a permanet ground such as a properly
gounnded outlet box. The adapter should not be used if a three-slot grounded receptacle is
available.
PRODUCT SPECIFICATIONS
VOLTAGE 120 V, 60 Hz
AMPS (with heater) 11.7 Amps
AMPS (without heater) < 0.1 Amps
WATTS (with heater) 1400 Watts
WATTS (without heater) < 10 Watts
4
PACKAGE CONTENTS
Part Description Quantity
A Hearth/Base 1
B Left Front Panel 1
C Right Front Panel 1
D Center Front Panel 1
E Left Side Panel 1
F Right Side Panel 1
G Mantel/Top 1
H Center Top Panel 1
I Insert 1
G
D
B
A
I
E C
F
H
5
HARDWARE CONTENTS
Part
Description Quantity
Picture
(Shown to size)
SAFETY INFORMATION
WARNING
Before assembly, carefully use scissors or utility knife to cut and unwrap all parts.
Make sure you do not discard the hardware.
CAUTION
Use care in assembling your new replace. Take your time and use the hardware
provided and a quality Phillips head screwdriver. Never overtighten bolts.
Do not sit on any part of the mantel.
All panels are labeled left and right as viewed from the front of unit.
WARNING
To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a
source of power during unpacking and assembly. The cord must remain unplugged whenever
you are adjusting/assembling the replace.
If any part is missing or damaged, do not attempt to use or plug in the power cord until the
missing or damaged part is correctly replaced. To avoid electric shock, use only identical
replacement parts when servicing double-insulated tools.
Camlock
Screw
Screw
Wood Dowel
16
8
4
24
BB
DD
CC
AA
Touch-up Pen
Model No. W3348
1
ZZ
W3348
6
1. Locate the Left Front Panel (B), Right Front Panel
(C), Center Front Panel (D) and set out face down
on a scratch-free surface.
Insert one Wood Dowel (CC) and screw Camlock
(AA-1) into the holes of the Center Front Panel (D).
make sure to tighten Camlock (AA-1). Push Left
Front Panel (B) and Right Front Panel (C) snug to
the Center Front Panel (D). Insert Camlock
(AA-2) into the holes in the left and right side panels.
Insert one Screw (DD) into the pre-drilled holes on
the Center Front Panel (D). Use Phillips head
screwdriver to tighten Camlock (AA-2) and Screw
(DD).
ASSEMBLY INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts
with package contents list and diagram above. If any part is missing or damaged, do not
attempt to assemble, install or operate the product. Contact customer service for
replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors
and utility knife
Hardware Used
DD
AA
CC
Camlock x 2
Screw x 4
Wood Dowel
x 2
Fig. 1
AA
D
B
C
CC
DD
DD
Camlock installation.
For correct installation, screw AA-1 must be
inserted and tightened in the pre-drilled hole.
Camlock AA-2 must be inserted into the
pre-drilled hole with the cross positioned in
the direction of screw AA-1.
7
Fig. 3
Fig. 4
3.Screw Camlock (AA-1) into the holes in the
pre-drilled holes on the completed assembly from
the step 2, insert one Wood Dowel (CC) into the
holes on the side panels. make sure to tighten
Camlock (AA-1). Push Left Side Panel (E) and
Right Side Panel (F) snug to the Completed
assembly from the step 2. Insert Camlock (AA-2)
into the holes in the side panels. Use Phillips head
screwdriver to tighten Camlock (AA-2).
4. Locate Hearth/Base (A) and lie down on scratch free
surface, Insert Wood Dowel (CC) into the
Hearth/Base, push the completed assembly from
the step 3 to the Hearth/Base as show in diagram,
tighten Screw (BB) through the pre-drilled holes.
CC
F
E
AA
A
CC
BB
Fig. 2
2. Screw Camlock (AA-1) into the holes in the
pre-drilled holes on the Center Top Panel (H), and
insert one Wood Dowel (CC) into the holes in the
pre-drilled holes on the top edge of the front
assembly, then attach Center Top Panel (H). Insert
Camlock (AA-2) into the holes in the left and right
side panels. Use Phillips head screwdriver to tighten
Camlock (AA-2).
HAND TIGHTEN ONLY.
H
AA
CC
Hardware Used
AA
CC
Camlock x 2
Wood Dowel
x 2
Hardware Used
AA
CC
Camlock x 6
Wood Dowel
x 6
Hardware Used
BB
CC
x 8
Screw
Wood Dowel
x 8
8
ELECTRICAL CONNECTION
A 15-Amp, 120-V, 60 Hz circuit with a properly grounded outlet is required. Preferably, the replace will
be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or
the fuse to blow when the heater is in operation. The unit comes standard with 6-ft. three-wire
cord, exiting from the rear of the replace. Avoid using an extension cord. If an extension cord must be
used, it must be a minimum 14 AWG, three wire with grounding type plug connector and rated not less
than 1875 watts. The cord shall not be more than 20 ft. in length.
Cold climate installation recommendation: When installing this unit against a non-
insulated exterior wall or chase, it is mandatory that the outer walls be insulated to
conform to applicable insulation codes.
Fig. 6
Install
Insert
From
Back
Mounting
Bracket
Completed
Unit
Electric
Fireplace Insert
6. Remove the two mounting brackets attached to the
back of the Left and Right Front panels.
Set aside with the wood screws.
PLEASE READ ALL “ELECTRIC FIREPLACE
INSERT” INSTRUCTIONS PRIOR TO INSTALLING
ELECTRIC INSERT IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL THE INSERT IN
YOUR FIREPLACE
Lift insert carefully into the back of the unit and
center in the insert opening. Do not drag insert
across Hearth/Base (A) as it may scratch your unit.
Install the mounting brackets to hold insert ush
against the inside of the mantel front panel.
MOVE YOUR COMPLETED UNIT ONLY SHORT
DISTANCES. MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS FINAL
POSITION.
Fig. 5
5. Insert one Wood Dowel (CC) into the pre-drilled
holes on the top edges of the assembly from step
4. Insert Camlock (AA-1) into the predrilled holes
in the underside of the Mantel/Top (G), make sure
to tighten. Insert Camlock (AA-2) into the holes in
the Side Panels. Attach the Mantel/Top (G) nished
side up to the completed assembly. Use Phillips
head screwdriver to tighten Camlock (AA-2).
G
AA
CC
Hardware Used
AA
CC
Camlock x 6
Wood Dowel
x 6
9
Note: When a function is changed from the control
panel or remote control there will be a corresponding
indicator (see Figure 1) on the upper-right of the
projection screen. The indicator shows the function
changed and the level selected by the control panel or
remote control. When the function is turned off, the
corresponding indicator will ash 5 times and then
fade off.
°
°
C
F
Fig . 1
OPERATING INSTRUCTIONS
Control panel can be accessed at upper-right corner of insert (I).
- POWER
The power button supplies power to all of the functions of the replace. The power button will put the
insert in a standby mode. This will turn off all functions at once but will hold the settings in the memory.
By pressing the power button again the unit will turn on at the same settings.
NOTE: Holding the power button on the control panel for 10 seconds will disable the heater function.
- FLAME
Each time the ame button is pressed, the intensity of the ame decreases. There are 6 brightness levels
you can cycle through, including the OFF setting.
- HEATER
Your replace consists of a fan-forced wire-element-type heater. There are 11 thermostat levels you can
cycle through, including the OFF and ON settings.
This button on the remote control only turns ON and OFF heater function.
NOTE: To change between °F and °C press and hold the heater button on the control panel for
10 seconds.
- TIMER
Press the timer button to cycle through the 10 timer settings (30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H,
7H, 8H and 9H) and the OFF setting.
10
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Modi cations not approved by the party responsible for compliance could void user’s authority to operate
the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
REPLACING THE REMOTE CONTROL BATTERY
When the remote control stops operating or its range seems reduced, it is time to replace the battery with
new ones. Note: Batteries should be removed if the product is to be left unused for a long time.
1. The battery compartment is located on the back end of the remote.
2. Press and slide the battery door open and remove the old battery.
3. Insert 2 AAA batteries (not included), checking that the + and - sides of the battery match inside the
battery compartment.
4. Replace the battery compartment door.
DISPOSAL OF USED BATTERIES
Battery may contain hazardous substances which could be endangering to
enviroment and human health.
This symbol marked on the battery and/or packaging indicates that used battery shall
not be treated as municipal waste. Instead it shall be left at the appropriate collection
point for recycling.
By ensuring the used batteries are disposed of correctly, you will help preventing
potential negative consequences for the environment and human health. The recycling
of materials will help to converse natural resources.
For more information about collection and recycling of used batteries, please contact
your local municipality, your waste disposal service or the point of sale where you
purchased this point.
NOTE: PLEASE OPERATE REMOTE TRANSMITTER AT A SLOW MEASURED PACE. PRESS THE
REMOTE CONTROL BUTTONS WITH AN EVEN MOTION AND GENTLE PRESSURE. REPEATEDLY
PRESSING BUTTONS IN RAPID SUCCESSION MAY CAUSE THE TRANSMITTER TO
MALFUNCTION.
11
WARNING: Make sure the power is turned off before proceeding. Any electrical repairs
or rewiring of this unit should be carried out by a licensed electrician in accordance with
national and local codes.
If repairing or replacing any electrical component or wiring, the original wire routing,
color coding and securing locations must be followed.
• The motors used on the fan and the ame generator assembly are pre-lubricated for extended bearing
life and require no further lubrication. However, we recommend periodic cleaning/vacuuming of the
fan/heater.
Make sure the unit is turned OFF and unplugged whenever you are cleaning the heater or replace.
WARNING: Electrical outlet wiring must comply with local building codes and other
applicable regulations to reduce the risk of re, electrical shock and injury to persons.
WARNING: Do not use this replace if any part of it has been under water. Immediately
call a quali ed service technician to inspect the replace and replace any part of the
electrical system.
WARNING: Disconnect power before attempting any maintenance or cleaning to reduce
the risk of re, electrical shock or personal injury.
WARNING: During any service of this appliance, the power to the unit must be turned off.
First turn the main power switch to the OFF position. Then remove the electrical plug from
the wall outlet.
CARE AND MAINTENANCE
• Dust your replace regularly with a soft non-lint producing cloth or household
dusting product.
• Clean your replace with a gentle non-abrasive household cleaner. Make sure
to dry your replace immediately with a soft cloth or towel.
• Tips for using touch-up pen (ZZ): For scratches, stroke in direction of scratch. For worn areas,
stroke in direction of wood grain. Rub excess colorant promptly with a soft cloth.
12
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
No power, logs do not glow. 1. Power cord was not
plugged in the outlet.
2. Main power switch is not
in “ON” position.
1. Check that unit is plugged into
a standard 120V outlet.
2. Press power button several
times, making sure power
is set at “ON” position.
Logs glow, but no ame effect. Flame button is not in
“ON” position.
Press ame button several times.
Heater does not blow warm air. The current room temperature
is higher than the temperature
setting.
Adjust the temperature settings
to ensure that the thermostat is
set higher than the current room
temperature.
Heater doesn’t work, but Power
and Heater settings are “ON”
and thermostat is set
(see solution above).
The product is on protected
status.
Turn all switches to the “OFF”
position and unplug the unit from
the wall outlet for 5 minutes. After
5 minutes plug the unit back into
wall outlet, and operate as normal.
Flame effect works but heater
function does not and the
emberbed ashes when the
heater button is pressed.
Heater function is locked. Heater function is locked. Press
and hold the POWER button to
unlock the heater function.
13
1-YEAR LIMITED WARRANTY
The manufacturer warrants this product to be free from manufacturing and material defects for a period of
one year from date of purchase, subject to the following conditions and limitations.
1. Install and operate this Electric Fireplace in accordance with the installation and operating
instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse,
accident, or misuse of the product shall nullify this warranty.
2. This warranty is non-transferable, and is made to the original owner, provided that the purchase was
made through an authorized supplier of the product.
3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or
workmanship, provided that such part(s) have been subjected to normal conditions of use and
service, after said defect is con rmed by the manufacturer’s inspection.
4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by
refunding the wholesale price of the defective part(s).
5. Any installation, labor, construction, transportation, or other related costs/expenses arising from
defective part(s), repair, replacement, or otherwise of same, will not be covered by this warranty,
nor shall the manufacturer assume responsibility for same.
6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or
consequential loss or damage arising out of the use, or inability to use the product, except
as provided by law.
7. All other warranties – expressed or implied – with respect to the product, its components and
accessories, or any obligations/liabilities on the part of the manufacturer are hereby expressly
excluded.
8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other
liabilities with respect to the sale of the product.
9. The warranties as outlined within this document do not apply to non accessories used in conjunction
with the installation of this product.
This warranty is void if:
a. The replace is subjected to prolonged periods of dampness or condensation.
b. Any unauthorized alteration, willful abuse, accident, or misuse of the product.
c. You do not have the original receipt of purchase.
IF WARRANTY SERVICE IS NEEDED
Contact the manufacturer by calling customer service department at 1-866-661-1218,
8 a.m.-8 p.m., EST, Monday-Friday. Make sure you have your warranty, your sales receipt,
location of purchase and the model/serial number of your product.
14
Printed in China
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-661-1218,
8 a.m.-8 p.m., EST, Monday-Friday.
Part Description
Part No.
23EF023GRA
Qty
A Heater/Blower Assembly Y07-C26-P01 1
B Main Circuit Board Y11-C53-P15 1
C Flame Generator Drive Motor Y07-P10Q 1
D Flame Generator/ Spinner Y10-S52-P011 1
E LCD Display Y10-C43-P70 1
F Front Projection Screen Y10-S52-P09 1
G Flame Circuit Board Y11-C53-P40 1
H Emberbed with log Y10-S52-P02 1
I Control Panel Circuit Board Y10-S52-P32 1
J Control Panel - 4 Buttons Y10-C43-P25 1
K Remote Control - 4 Buttons P71 1
REMOTE/REMOTO/
TÉLÉCOMMANDE
A
K
B
C
D
E
F
G
H
I
J
15
73702/23WM9083-PM92
Twin-Star International, Inc.
Delray Beach, FL 33445
Fabricado en China
Impreso en China
English p.1
ÍNDICE
Información Importante .......................................................................................................................16
Especi caciones Del Producto ............................................................................................................17
Contenido Del Paquete .......................................................................................................................18
Herrajes Incluidos ................................................................................................................................19
Información De Seguridad ...................................................................................................................19
Preparación .........................................................................................................................................20
Instrucciones De Montaje ....................................................................................................................20
Instrucciones De Funcionamiento .......................................................................................................23
Cuidado Y Mantenimiento ...................................................................................................................25
Solución De Problemas .......................................................................................................................26
Garantía Limitada De 1 Año ................................................................................................................27
Lista De Piezas De Repuesto Y Plano De Piezas ...............................................................................28
CHIMENEA ELÉCTRICA
MANUAL DE INSTRUCCIONES
En inglés llame al: 866-661-1218
En francés llame al: 866-374-9203
En español llame al: 866-661-1218
Servicio al cliente:
16
Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto.
Si tiene alguna pregunta sobre el producto, comuníquese con Servicio al Cliente al 1-866-661-1218, de
lunes a viernes, de 9 a.m. a 5 p.m. (hora estándar del Este).
Cuando utilice electrodomésticos, siempre tome medidas de precaución básicas para evitar incendios,
descargas eléctricas y lesiones personales. Entre ellas:
1. Lea todas las instrucciones antes de usar este electrodoméstico.
2. Este electrodoméstico se calienta cuando está en funcionamiento. Para evitar quemaduras, no
toque super cies calientes con la piel descubierta. Si se incluyen, utilice las manijas para trasladar
el electrodoméstico. Mantenga materiales in amables, como muebles, almohadas, ropa de cama,
papeles, ropa y cortinas al menos a 91,44 cm (3 pies) de la parte delantera de este
electrodoméstico.
ADVERTENCIA: Para evitar el sobrecalentamiento, no cubra el calentador
ADVERTENCIA: Tenga extrema precaución cuando utilice el calentador cerca de niños y de
personas discapacitadas.
3. Este electrodoméstico no debe ser usado por personas o niños con capacidades físicas, sensoria
les o mentales reducidas o sin experiencia ni conocimientos, a menos que una persona
responsable de su seguridad les brinde supervisión o capacitación respecto al uso del
electrodoméstico.
4. Este electrodoméstico no es un juguete. Supervise a los niños que juegan cerca.
5. Si es posible, siempre desenchufe este electrodoméstico cuando no lo use.
6. No opere ningún calentador con un cable o enchufe dañados, después de fallas del mismo, de que
se haya dejado caer o dañado de cualquier forma.
7. Si el cable de alimentación está dañado, el fabricante, su empresa de servicio o alguien de
cali cación similar deben reemplazarlo para evitar peligros.
8. Sólo un técnico cali cado debe reparar este producto.
9. Bajo ninguna circunstancia se debe modi car esta chimenea. Las piezas que se deben retirar para
reparación se deben reemplazar antes de volver a hacer funcionar esta chimenea.
10. No lo use en exteriores.
11. Este calentador no se debe usar en el baño, lavadero y en espacios húmedos similares inte riores.
Nunca coloque este calentador donde se pueda caer dentro de una bañera u otro contenedor de
agua.
12. No coloque el cable debajo de una alfombra. No cubra el cable con alfombras, tapetes o similares.
Coloque el cable lejos de zonas de tránsito en donde nadie se pueda tropezar y caer.
13. Para desconectar este electrodoméstico, gire los controles a la posición de apagado y luego retire
el enchufe del tomacorriente.
14. Conecte sólo a tomacorrientes con la debida puesta a tierra.
15. Cuando está instalado, este artefacto debe presentar una conexión eléctrica a tierra según los
códigos locales, según los Códigos de Electricidad de Canadá CSA C22.1 o, para instalaciones en
EE.UU., siga los códigos locales y el código nacional de electricidad, ANSI/NFPA No. 70.
16. No debe colocar el calentador inmediatamente debajo de un tomacorriente jo.
17. No introduzca objetos extraños ni permita que entren en las aberturas de ventilación o escape, ya
que pueden provocar descargas eléctricas, incendios o daños en el electrodoméstico.
18. Para evitar incendios, no bloquee las entradas ni salidas de aire de ninguna manera. No use sobre
super cies blandas, como una cama, donde las aberturas se puedan bloquear.
19. Este electrodoméstico tiene en su interior piezas calientes y piezas que forman arcos eléctricos o
que echan chispas. No lo use en áreas donde se use o almacene gasolina, pintura o líquidos
in amables. Esta chimenea no se debe usar como una rejilla para secar ropa. No cuelgue medias
navideñas u otras decoraciones sobre o cerca de este producto.
20. Utilice este electrodoméstico sólo como se describe en este manual. Cualquier otro uso no
recomendado por el fabricante puede causar incendios, descargas eléctricas o lesiones personales.
21. Hay un limitador del termostato dentro del calentador. Cuando ocurre un sobrecalentamiento de la
temperatura interna o un calentamiento anormal, el dispositivo protector del termostato cortará la
alimentación de energía para evitar un daño en la chimenea o un riesgo de incendio.
INFORMACIÓN IMPORTANTE
17
ESPECIFICACIONES DEL PRODUCTO
VOLTAJE 120 V, 60 Hz
AMPERAJE (con calentador) 11,7 amperios
AMPERAJE (sin calentador) < 0,1 amperios
VATAJE (con calentador) 1400 vatios
VATAJE (sin calentador) < 10 vatios
INFORMACIÓN IMPORTANTE
22. Evite utilizar una extensión eléctrica porque se puede sobrecalentar y provocar un incendio. Sin
embargo, si tiene que usar un cable de extensión, debe ser de tamaño mínimo AWG No.14 y tener
una clasi cación de 1875 vatios cómo mínimo. La extensión eléctrica debe ser un cable de tres
conductores con enchufe con puesta a tierra y un conector para cable. La extensión eléctrica no
debe tener más de 6,10 m (20 pies) de largo.
23. Consulte las instrucciones en la Figura 1. Este calentador fue diseñado para su uso en 120 voltios.
El cable tiene un enchufe, como se muestra en la gura 1. Vea la gura 1 para conocer las
instrucciones de puesta a tierra. Hay disponible un adaptador, como se muestra en C, para conectar
enchufes con puesta a tierra de tres clavijas a receptáculos de dos ranuras. La orejeta verde de
puesta a tierra que sale del adaptador se debe conectar permanentemente a tierra, como a través de
una caja de un tomacorriente correctamente puesto a tierra. El adaptador no se debe usar si hay
disponible un receptáculo de tres ranuras puesto a tierra.
B
A
C
D
Fig. 1
Clavija con
puesta a tierra
Tornillos
para metal
Medios de
puesta a tierra
GUARDE ESTAS
INSTRUCCIONES
18
Pieza Descripción Cantidad
A Chimenea/Base 1
B Panel Frontal Izquierdo 1
C Panel Frontal Derecho 1
D Panel Frontal Central 1
E Panel Lateral Izquierdo 1
F Panel Lateral Derecho 1
G Chimenea/Repisa 1
H
Panel Superior Central 1
I
Inserto 1
CONTENIDO DEL PAQUETE
G
D
B
A
I
E C
F
H
19
HERRAJES INCLUIDOS
Parte
Descripción Cantidad
Imagen
(Tamaño real)
INFORMACIÓN DE SEGURIDAD
ADVERTENCIA
Antes del montaje, corte con unas tijeras o un bisturí y desenvuelva las piezas
cuidadosamente. Asegúrese de no desechar los herrajes.
PRECAUCIÓN
• Tenga cuidado al armar su nueva chimenea. Tómese su tiempo y use los elementos
suministrados y un destornillador Phillips de calidad. No apriete demasiado los pernos.
No se siente en ninguna parte de la repisa de la chimenea.
Todos los paneles están etiquetados izquierda y derecha, vistos desde el frente de la
unidad.
ADVERTENCIA
Para evitar lesiones por arranque inesperado o descarga eléctrica, no conecte el cable de
alimentación a una fuente de energía durante el desembalaje y montaje. El cable debe
permanecer desconectado siempre que se ajuste/arme la chimenea.
Si alguna pieza falta o está dañada, no intente usar o conectar el cable de alimentación hasta
que la pieza dañada o faltante sea sustituida correctamente. Para evitar una descarga
eléctrica, utilice únicamente piezas de repuesto idénticas cuando dé mantenimiento a
herramientas doblemente aisladas.
Leva de Bloqueo
Tornillo
Tornillo
Clavija de Madera
16
8
4
24
BB
DD
CC
AA
Plumón de Retoque
Modelo No. W3348
1
ZZ
W3348
/