HD 1080P CAR DASH
CAMERA
KADCAMG12A
• Dash camera
• Mini USB car charger
• User guide
1 Power/Lock button
2 Power port
3 Reset button
4 MicroSD card slot
COMPONENTS LIST
OVERVIEW
1
2
3
4
MicroSD card
Insert an 8–128GB class 10 MicroSD card (not supplied) into the MicroSD card slot.
Connecting
1. Connect the Mini USB end of the Mini USB car charger into the power port.
2. Connect the other end into the car’s power outlet to charge.
3. For the best visibility, place the dash camera close to the centre of the front
windshield.
This dash camera uses the Waycam app to take photos and view recorded footage.
1. Install the Waycam app from the Play Store (Android) or App Store (iOS).
Play Store (Android)
App Store (iOS)
2. On your mobile device, ensure Wi-Fi is turned on. Press and hold the power/lock
button to turn the dash camera on.
3. Enter the Wi-Fi settings on your mobile device then look for the network called
‘HiDvr_WIFI’. Tap to connect (password: 12345678). This Wi-Fi network does not have
internet access. If your mobile device prompts a warning regarding no internet access
on the Wi-Fi network, tap ‘Connect’. If this is not tapped, you will be unable to access
the Waycam app.
BEFORE USE
APP INSTALLATION
4. Ensuring your mobile device is connected to ‘HiDvr_WIFI’, open the Waycam app.
This will open the home screen.
Tap ‘Connect’. This will open the interface of the app, and the dash camera will be
ready for use.
Powering
Press and hold the power/lock button to turn the dash camera on/off. When connected to
the Waycam app, the dash cam will be continually recording footage.
Locking video
Locking video footage will prevent it from being overwritten or erased from the MicroSD
card. This may be useful if witnessing or in an accident that requires footage as proof.
Press the Power/Lock button to lock the currently filmed footage.
Resetting
To reset the dash camera, use a pin to press and hold the reset button for six seconds. The
Wi-Fi network will also reset.
App interface
Gallery
Tap on the gallery icon to view recorded footage and photos.
Photo
Tap on the photo icon to take a photo of the current camera view.
OPERATION
Camera view
Full screen
Gallery
Photo
Settings
Settings
Tap on the settings icon to adjust the settings of the app and camera.
Full screen
Tap the full screen icon to view the camera view in landscape mode.
Saving photos/videos onto your phone using Android
Photos/videos must first be downloaded before they are saved.
1. Go to the Gallery in the Waycam app and tap on the photo/video you wish to
download.
2. Tap on the three dots on the top right corner of the screen, then tap ‘Download’. The
photo/video will then begin downloading.
3. Once downloaded, go back to the home screen of the app, then tap ‘Downloaded’.
4. Tap on the three dots on the top right corner of the screen, then tap ‘Save to phone’.
The photo/video has now been saved.
Saving photos/videos onto your phone using iOS
Photos/videos must first be downloaded before they are saved.
1. Go to the Gallery in the Waycam app and tap ‘Select’. Tap on the photos/videos you
wish to download.
2. Tap ‘Download’ and the photos/videos will begin downloading.
3. Once downloaded, tap ‘Downloaded’ then tap ‘Select’ on the photos/videos you
wish to save to your phone.
4. Tap ‘Save to Phone Album’ and the photos/videos will be saved.
Problem Possible solutions
After connecting to the
dash camera’s Wi-Fi, the
mobile device’s screen
turns black or flashes
when trying to access the
Waycam app.
• If using an Android device, ensure you chose to connect
to the dash camera’s Wi-Fi when prompted. The dash
camera’s Wi-Fi network has no internet access, but will
function as a hotspot to connect your device to the
camera.
• Uninstall and reinstall the Waycam app. Ensure all app
permissions are allowed.
• Disconnect and remove the dash camera’s Wi-Fi
network from your mobile device. Attempt reconnecting
to the Wi-Fi network with the password.
The dash camera is not
recognising the MicroSD
card/video is not
recording.
• Ensure the MicroSD card used is of high quality.
• Ensure the MicroSD card used is between 8–128GB and
at least class 10.
The dash camera is
flashing.
• Ensure the Mini USB is well connected to the power
port of the dash camera.
• Ensure the voltage and current are sufficient. This dash
camera requires 5V and 2A of power.
TROUBLESHOOTING
Recording angle Wide-angle 170°
Video format H.264 compression, TS
Video mode Loop recording, auto overwriting
Temperature range –35°C–75°C
Microphone support Yes (enabled by default)
MicroSD card support 8–128GB, at least class 10
G-Sensor Triaxial acceleration sensor
Seamless recording Yes
Time stamps Supported
Video playback Yes
SPECIFICATIONS
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
