2. Ralph Lauren
  3. RL 11094

Ralph Lauren RL 11094 User manual

  • Hello! I've reviewed the assembly instructions for the Ralph Lauren RL 11094 table lamp. This document provides guidance on how to install, adjust the height and shade of the lamp. I'm ready to answer any questions you might have about its setup or features.
  • How do I adjust the height of the lamp?
    How do I adjust the lamp shade?
    What should I use for cleaning the lamp?
1. Insert light bulb into lamp holder.
2. Remove protective plastic cover (E) from plug (D).
3. Plug lamp into electrical outlet.
4. TO ADJUST LAMP HEIGHT:
1- Adjust lamp by pulling or pushing pole (C) up or down to desired
height.
5. TO ADJUST LAMP SHADE:
1- Loosen the adjustment keys (B) on both side of shade (A).
2- Swing lamp shade (A) to desired position.
3- Tighten the adjustment key (B).
Care Instructions: Clean only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
Carthage Table Lamp
Item # RL 11094
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
NOTICE:
US
M
L
I
D
S
E
T
(D)
(E)
(A)
(B)
(C)
/