KENT 111013 User manual

Brand: KENT

Model: 111013

Type: User manual

Instruction Handbook

for Installation, Operation

and Maintenance.

UV Purifier with Ultra Filtration Process

and Computer Controlled Operation

to KENT

Avoid exposure to direct

sunlight and installation in damp

areas.

10 M

Water Source

Water in

Avoid sharp bends in pipes.

Do not try to service the purifier on your own. Instead,

call the service technician for help.

In case the purifier is not to be used for

more than two days, switch off the power

supply and drain the storage tank.

Introduction

Salient Features of the KENT MAXX

Items in the Box

Important Instructions

Use Genuine KENT spares for optimum performance.

UV Process

700400

Wavelength(nm)

UVB

280-315

UVC

200-280

X-Rays Ultraviolet Visible Infrared Microwave Radio

UF Process

Water Flow Diagram

Electrical Circuit Diagram

Installation Instructions

2 Sec. 2 Sec. 2 Sec. 2 Sec.

30 Sec. 30 Sec.

Slot holes

Computer Controlled Operation

Open the Upper Cover Remove the water tank Clean it under running

tap water and wipe dry

Switch off the power supply.

White

0.3 kg/cm /10ºC

0.1 Micron

11W

Applications

Product Colour

Purification Production Rate

Body Material

Installation

Dimensions (mm)

Filter Cartridge

Inlet Water Pressure/Temp (min)

Weight

UF Membrane Pore Size

UV Lamp Wattage

60L/hr. (depending on inlet water pressure)

ABS Food Grade Plastic

Wall-mounting/Counter-top

390 (L) x 285 (W) x 400 (H)

Sediment, Activated Carbon, UF

6.10 kg

4 kg/cm /40ºC

Inlet Water Pressure/Temp (max)

111013Product Code

Product KENT MAXX

24V DC

Voltage Output of SMPS

5000 hrs. of operation

Life of UV Lamp

Water PurifierProduct Generic Name

Input Power Supply Single Phase 140-250 V AC, 50-60 Hz.

Total Power Consumption 36 W

Maintenance

Starting-up the Purifier

Important Safety Instructions

IPX1

Warning

KENT 111013 User manual

KENT 111013 User manual

Related papers

Other documents