Tern Shortbed User guide

Category
Flat panel accessories
Type
User guide
Shortbed Tray
What’s Included
Weight Limit
Do not exceed 35 kg (77 lb).
Safety
Do not use the Shortbed Tray to move your bike.
Place loads evenly and as central on the Tray as possible.
Secure all cargo before riding. Take care that all straps are tied down and any loose item is secured.
Installation
Tools required (not included)
10 mm Wrench
4 mm Allen Wrench
Affix Rubber Pads
Clean metal surface with rubbing alcohol to remove dirt and oil. Peel off back of sticker and affix to the locations
shown in the diagram below.
1. Shortbed Tray
2. Shortbed Plate
3. M6 x 30 mm Bolt x 4
4. M6 Washer x 8
5. M6 Nut x 4
6. Plastic Washer x 4
7. Rubber Pad x 16
8. SideStrap x 2
1
2
3
4
5
6
7
8
Inside Tray
Outside Tray
Rubber Pad
ternbicycles.com
LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1) YEAR Limited Warranty from the date of
retail purchase by the original end-user. If a material or workmanship defect arises and a valid claim is received within the
Warranty Period, this Product will be replaced. Mobility Holdings cannot be held liable for damages to personal property due to
misuse or improper care and maintenance. This Product Warranty does not, under any circumstance, cover the replacement or
cost of any third party product used with or connected to the Product.
Tern, the Tern Werd (logotype), the Tern Berd (device), GSD, HSD, Quick Haul, Short Haul, and Shortbed Tray used alone or in
combination are trade names, trade devices or registered trademarks of Mobility Holdings, Ltd.
© 2023. Tern is a trademark of Mobility Holdings, Ltd. All Rights Reserved.
ternbicycles.com
To mount parallel on the GSD
To mount perpendicular to the GSD, HSD, Quick Haul or Short Haul
Assembly sequence
Bolt
Washer
Shortbed Tray
Plastic Washer
Rack
Washer
Nut
  • Page 1 1
  • Page 2 2

Tern Shortbed User guide

Category
Flat panel accessories
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI