2. Molift
  3. Raiser Pro

Molift Raiser Pro User guide

  • Hello! I have analyzed the provided quick guide for the Molift Raiser Pro. This document covers essential aspects of using the device, including assembly, leg support adjustments, and safe user transfers. I'm here to assist you with any questions you might have about the Molift Pro and its features mentioned in this guide.
  • What should I do before using the Molift Raiser Pro?
    What is the maximum weight the device can support?
    What should I check about knobs and screws?
Molift Raiser Pro, Quick guide | QG43001 Rev. A | www.etac.com
Quick guide (EN)
QG43001 Rev A 2022.10.17
Molift Raiser Pro
Important
Read user manual before use! This Quick guide does not replace user manual. It is important to fully understand the
content of the user manual before attempting to use the equipment.
Go to www.etac.com for latest version of user manual.
Never exceed Safe Working Load (SWL) of 170 kg (375 lbs)
Make sure that knobs and screws are properly fastened. Loose knobs and screws can make the Molift Raiser Pro
wobbly and unsafe to use.
Knob
Handle
Screw
Release wire
Knob Foot plate
Brake pedals
Leg support
Height label
Attachments for
accessories (2 heights)
Short user guide
Etac A/S
Parallelvej 3
DK-8751 Gedved
www.etac.com
Molift Raiser Pro, Quick guide | QG43001 Rev. A | www.etac.com
User / carer - size relation and body placement
③
②
Assembling Molift Raiser Pro for use
Setting leg support position
①②
”Click”
③
①
Transfering user, up and down
①② ③ ④
/