Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Octagon Bench Assembly Manual
Outdoor Living Today
2 Legs (A)
Bench Seat (B)
Hardware List
2 1/2” Screws -
Legs to Bench Seat Cleat
Leg Support to Legs
2” Screws -
Leg Support to Bench Seat
* Use 1/8” Drill Bit for Pilot
Holes to avoid splitting wood
when inserting screws.
Important - If you receive a
broken or missing part.
Please contact our Customer
Service Center immediately
@ 1-888-658-1658 for
assistance.
Parts List for
Gazebo Bench
2 Leg Support Braces (C)
Leg Cross
Member
(attached)
Page 1
1. With Bench Seat (B) flipped over on
clean level ground, locate 1 Leg (A)
and 1 Leg Support Brace (C).
Center Leg Support Brace on Mid
Bench Seat Cleat.
Once Leg Support Brace is
centered on the Mid Bench
Cleat and Leg Cross Member,
secure to Cross Member with
2 - 2” screws. Secure to Mid
Bench Cleat with 2 - 2 1/2”
screws.
Mid Bench
Seat Cleat
(attached)
Centered.
2.
2 ”
screws
2 1/2”
screws
6”
Version #3
Feb 23rd, 2015
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
4.
Flip completed Bench over and place inside gazebo
against sidewall.
Page 2
3. Using 4 - 2 1/2” screws, attach
Leg to underside of Bench Seat
as shown in picture to the left.
Attach 2nd Leg Support Brace
(C) to Mid Bench Cleat as per
Step 2 using 2 - 2 1/2” screws.
Complete attachment of 2nd
Leg as per Step 2.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
OLT 24 User guide
-
OLT Architect Knotty Siding Assembly Manual
-
-
-
-
-
-
-
-
Other documents
-
Outdoor Living Today BZS119 Installation guide
-
-
-
-
-
-
-
-
-