WHP20-1D

AMERICAN BUILT PRO WHP20-1D Operating instructions

  • Hello! I'm a chat assistant and I've reviewed the user manual for the American Built Pro water heater pans. This document provides instructions on the safe and proper installation and usage of water heater pans, including placing the pan, setting the heater, and installing a drain hose adapter. I am ready to answer your questions about this product and manual.
  • What type of water heaters are these pans recommended for?
    Where should the water heater pan be placed?
    How should the water heater be placed on the pan?
    What should I avoid when using a water heater pan?
USE INSTRUCTIONS – WATER HEATER PANS
GENERAL
Recommended for use with electric water heaters only
Be sure to purchase drilled (drain hole pre-drilled in the side) or undrilled as desired
WATER HEATER PAN INSTALLATION
Place water heater pan under the area where the water heater is to be placed
Set water heater down onto the center of pan without putting any weight or force on the sides of the pan
INSTALLING DRAIN HOSE ADAPTER
Remove circular nut and rubber O-ring from drainhose adapter
Install drain hose adapter with threaded side through to inside of pan
Place the O-ring on the threaded side of adapter (inside of pan) and slide it to the pan inside wall
Hand-screw the circular nut until the nut is firmly up against the O-ring and inside wall of the pan (hand tight)
Attach hose (not included) to the outside of the drain adapter, with appropriate cement or glue and run hose to a
terminus per your local building code
PLEASE AVOID
Avoid setting the water heater on the edge of the pan or it may crush the pan
Avoid stepping on the pan
/