AMERICAN BUILT PRO WMSP-1Und User manual

USE INSTRUCTIONS – WASHING MACHINE PANS

GENERAL

• Recommended for use with full size washing machines with a footprint of up to 28” x 30”

• Be sure to purchase drilled (drain hole pre-drilled in the side) or undrilled as desired

WASHING MACHINE PAN INSTALLATION

• Place washing machine pan under the area where the washing machine is to be placed

• Set washing machine down onto the center of pan without putting any weight or force on the sides of the pan

INSTALLING DRAIN HOSE ADAPTER

• Remove circular nut and rubber O-ring from drainhose adapter

• Install drain hose adapter with threaded side through to inside of pan

• Place the O-ring on the threaded side of adapter (inside of pan) and slide it to the pan inside wall

• Hand-screw the circular nut until the nut is firmly up against the O-ring and inside wall of the pan (hand tight)

• Attach hose (not included) to the outside of the drain adapter, with appropriate cement or glue and run hose to a

terminus per your local building code

PLEASE AVOID

• Avoid setting the washing machine on the edge of the pan or it may crush the pan

• Avoid stepping on the pan

This manual is also suitable for

Download PDF