Jabra Engage 75 Mono
How do I connect my Jabra Engage with my Nortel IP 1120E,
1140E, 1150E, 1165E desk phone so I have remote call control
using my headset?
Prerequisites
Jabra Link 14201-32 electronic hook switch (EHS) cable
One of the following Nortel IP phones: 1120E, 1140E, 1150E, 1165E
To connect your headset:
1. Connect the USB plug of the Jabra EHS adapter into the USB port of
your desk phone.
2. Connect the 2-sided end of the Jabra EHS adapter into the Jabra base
by plugging the RJ10 (small) plug into the port marked with a blue
phone icon, and the RJ45 (wide) plug into the base port marked AUX.
To configure your headset when connecting to a desk phone for the first
time:
For the Jabra Engage 75, follow the onscreen setup wizard on the base.
For the Jabra Engage 65, the initial setup is complete after connecting
the cables.
See the user manual located in the Technical Documents section for more
details about setting up the desk phone.
Use Jabra Direct, the computer application that is available free of charge,
to learn more about your Jabra product. Use Jabra Direct to adjust
features and functions according to personal preference or company
requirements. Also ensure your Jabra product is updated to get the latest
performance. Visit jabra.com/direct for more information.