Jabra Engage 55 Operating instructions

Type
Operating instructions

Below you will find brief information for Engage 55 - USB-C UC Mono. This document provides instructions on how to reset your Jabra Engage 55 headset to its default settings. You can perform a reset either manually or using Jabra Direct. The manual reset involves ensuring the headset is disconnected from the Jabra Link 400, and then simultaneously pressing and holding both the Call button and the Volume up button.

Below you will find brief information for Engage 55 - USB-C UC Mono. This document provides instructions on how to reset your Jabra Engage 55 headset to its default settings. You can perform a reset either manually or using Jabra Direct. The manual reset involves ensuring the headset is disconnected from the Jabra Link 400, and then simultaneously pressing and holding both the Call button and the Volume up button.

Jabra Engage 55 - USB-C UC Mono
How do I reset my Jabra Engage 55 to the default settings?
You can reset your Jabra Engage 55 manually or by using Jabra Direct.
To reset the headset manually, ensure that it is not connected to the Jabra
Link 400. Then, simultaneously press and hold both the Call button and
the Volume up button.
19/10/2022 07:41
https://www.jabra.com/supportpages/jabra-engage-55/9553-430-125/faq/b325304c-
469c-4758-8332-826b9a112ceb
Page 1 of 1
  • Page 1 1

Jabra Engage 55 Operating instructions

Type
Operating instructions

Below you will find brief information for Engage 55 - USB-C UC Mono. This document provides instructions on how to reset your Jabra Engage 55 headset to its default settings. You can perform a reset either manually or using Jabra Direct. The manual reset involves ensuring the headset is disconnected from the Jabra Link 400, and then simultaneously pressing and holding both the Call button and the Volume up button.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI