BubblyNet T7 User manual

T7
Brand
BubblyNet
Model
T7
Type
User manual

BubblyNet T7 is a touchscreen device that can be installed in walls or other surfaces. It features a USB-C port for power and data, and can be controlled via Bluetooth Mesh. The device has a 7-inch screen and a resolution of 1024x600 pixels. It is suitable for use in various applications, including home automation, commercial displays, and industrial controls.

BubblyNet T7 is a touchscreen device that can be installed in walls or other surfaces. It features a USB-C port for power and data, and can be controlled via Bluetooth Mesh. The device has a 7-inch screen and a resolution of 1024x600 pixels. It is suitable for use in various applications, including home automation, commercial displays, and industrial controls.

T4 + T 7 TOUCHSCREEN INSTALLATION INSTRUCTIONS
WARNING - RISK OF FIRE AND ELECTRICAL SHOCK. DEVICE MUST BE INSTALLED BY
A QUALIFIED ELECTRICIAN ONLY. DEVICE IS INTENDED FOR INSTALLATION IN
ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, LOCAL AND FEDERAL
SPECIFICATIONS. DISCONNECT POWER AT ELECTRICAL PANEL BEFORE SERVICING.
RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.
CUTOUT TABLE
TOUCHSCREEN CUTOUT
4” SCREEN 4.7” X 3.3”
7” SCREEN 7.2” X 4.725”
BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com
The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts
no liability for consequential damage which is occasioned to the user based on the data provided.
TOUCHSCREEN INSTALLATION
1. MAKE A CUT OUT AS PER THE CUTOUT TABLE IN THE WALL USING APPROPRIATE CUTTING
TOOL. CUT OUT CAN BE LANDSCAPE OR POTRAIT MODE. . MAKE SURE TO PULL OUT THE USB-C
THROUGH THE CUT OUT. (FIGURE 1)
2. CONNECT THE USB-C TO THE TOUCH SCREEN. USB-C IS FOR POWER AND NECESSARY FOR
OPERATION.(FIGURE 2)
3. PULL THE SPRINGS BACK ( FIGURE 3)
4. INSERT THE TOUCH SCREEN IN THE WALL. MAKE SURE ALL CABLES ARE INSIDE THE WALL.
(FIGURE 4)
5. FLIP ON THE BREAKER TO THE SCREEN. IT WILL AUTOMATICALLY START THE SET-UP ROUTINE.
(FIGURE 5)
BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com
The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts no
liability for consequential damage which is occasioned to the user based on the data provided.
1 2 3
45
USB-C
WIRING DIAGRAM
BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com
The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts no
liability for consequential damage which is occasioned to the user based on the data provided.
•Consult Spec Sheet for full data on voltage range and current compatibility.
For best results, drivers need to be installed within 30 feet of the closest device within the Bluetooth Mesh
network. Signal strength significantly decreases in presence of metal barriers such as when devices are
enclosed in metal boxes.
INPUT POWER: 5V, 3A, USB-C
  • Page 1 1
  • Page 2 2
  • Page 3 3

BubblyNet T7 User manual

T7
Brand
BubblyNet
Model
T7
Type
User manual

BubblyNet T7 is a touchscreen device that can be installed in walls or other surfaces. It features a USB-C port for power and data, and can be controlled via Bluetooth Mesh. The device has a 7-inch screen and a resolution of 1024x600 pixels. It is suitable for use in various applications, including home automation, commercial displays, and industrial controls.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents