BubblyNet G4 plus G7 User manual

Brand: BubblyNet

Model: G4 plus G7

Type: User manual

BubblyNet G4 plus G7: The touchscreen interface provides intuitive control for smart home automation systems, offering a user-friendly experience for managing various smart devices. With its sleek design and seamless integration, the BubblyNet G4 plus G7 enhances the smart home experience, enabling seamless control and automation of lighting, thermostats, security systems, and more.

G4 + G7 TOUCHSCREEN INSTALLATION INSTRUCTIONS

WARNING - RISK OF FIRE AND ELECTRICAL SHOCK. DEVICE MUST BE INSTALLED BY

A QUALIFIED ELECTRICIAN ONLY. DEVICE IS INTENDED FOR INSTALLATION IN

ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, LOCAL AND FEDERAL

SPECIFICATIONS. DISCONNECT POWER AT ELECTRICAL PANEL BEFORE SERVICING.

RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.

CUTOUT TABLE

TOUCHSCREEN CUTOUT

4” SCREEN 4.7” X 3.3”

7” SCREEN 7.125” X 4.725”

BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com

The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts

no liability for consequential damage which is occasioned to the user based on the data provided.

TOUCHSCREEN INSTALLATION

1. MAKE A CUT OUT AS PER THE CUTOUT TABLE IN THE WALL USING APPROPRIATE CUTTING

TOOL. CUT OUT CAN BE LANDSCAPE OR POTRAIT MODE. . MAKE SURE TO PULL OUT THE USB-C

AND ETHERNET CABLE THROUGH THE CUT OUT. (FIGURE 1)

2. CONNECT THE USB-C AND ETHERNET CABLE TO THE TOUCH SCREEN. USB-C IS FOR POWER

AND NECESSARY FOR OPERATION, ETHERNET IS OPTIONAL BUT RECOMMENDED.(FIGURE 2)

3. PULL THE SPRINGS BACK ( FIGURE 3)

4. INSERT THE TOUCH SCREEN IN THE WALL. MAKE SURE ALL CABLES ARE INSIDE THE WALL.

(FIGURE 4)

5. FLIP ON THE BREAKER TO THE SCREEN. IT WILL AUTOMATICALLY START THE SET-UP ROUTINE.

(FIGURE 5)

BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com

The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts no

liability for consequential damage which is occasioned to the user based on the data provided.

1 2 3

ETHERNET

CABLE USB-C

WIRING DIAGRAM

BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com

The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts no

liability for consequential damage which is occasioned to the user based on the data provided.

•Consult Spec Sheet for full data on voltage range and current compatibility.

For best results, drivers need to be installed within 30 feet of the closest device within the Bluetooth Mesh

network. Signal strength significantly decreases in presence of metal barriers such as when devices are

enclosed in metal boxes.

INPUT POWER: 5V, 3A, USB-C