2. CTA
  3. ADD-LTPCF

CTA ADD-LTPCF User manual

  • Hello! I've reviewed the instruction manual for the CTA Laptop Holder ADD-LTPCF. This document provides detailed instructions on how to setup and use the laptop holder, including extending the brackets, securing a laptop, powering the cooling fan using an integrated USB cable, managing cables with the organizer, and mounting to VESA compatible devices. I'm ready to assist with any questions you have about its installation and features.
  • What is included in the package?
    How do I power the cooling fan?
    What tools are needed for setup?
2C. Plug into your laptop to power the fan.
2A. Locate the fan. 2B. Find the integral USB cable below.
2. Powering Up Cooling Fan
1A. Extend the
holder brackets.
1. How to Setup your Holder
1C. Once
laptop is
securely in
place, tighten
four knobs as
shown until
securely
fastened.
VESA Compatible Laptop & Other Device Holder
with Built-in Cooling Fan
ADD-LTPCF
INSTRUCTION - MANUAL
CONTENTS:
INSTALLATION:
888-733-4448
x1
A
4. Attaching to VESA Compatible Device
4A. Locate
the four
VESA holes
underneath.
Using an
allen key
(not
provided,
remove
endcaps)
4B. Screw in
the four
screws from
the back to a
VESA
compatible
device using
screwdriver.
(not
provided)
**Laptop only
shown for
illustration
purposes, not
included.
3A. Route all
cables through
the cable
organizer as
illustrated.
3. Cable Management
**Laptop only
shown for
illustration
purposes, not
included.
1B. Adjust the
holder to your
laptop by
sliding the
brackets
towards it.
**Laptop only
shown for
illustration
purposes, not
included.
/