2. Hoover
  3. FH50710

Hoover FH50710 User manual

  • Hello, I'm a chat assistant specializing in helping you with the use of your cleaning devices. I've reviewed the user manual for the Hoover POWERDASH PET carpet cleaner.. The document explains how to assemble the cleaner, prepare it for use, and provides instructions on cleaning your carpets effectively. I'm ready to answer any questions you might have.
  • How do I assemble the carpet cleaner?
    How do I prepare the carpet cleaner for use?
    How do I start cleaning?
    How do I dry the carpet?
POWERDASH™ PET
CARPET CLEANER
1.
Insert handle into upper handle pole.
1.
Remove Clean Water Tank, twist o water cap and
add warm water to the fill line.
5.
Step on the ON/OFF Pedal to turn ON.
2.
Insert the upper handle pole into the base.
2.
Add Hoover® cleaning solution to the solution fill
line then replace and tighten the cap.
6.
Slowly push forward then backwards while squeezing
the trigger to apply water and cleaning solution.
3.
Slide the Clean Water Tank securely into place on
the back of the unit.
3.
Slide the Clean Water Tank back into the unit.
7.
Release trigger then slowly push forward then
backwards to remove water and dry the carpet.
4.
Align the hooks on the nozzle cover to the arrows
on the unit and rock cover into place.
4.
Plug power cord into electric outlet. Step on the
Handle Release Pedal to recline the unit into the
cleaning position.
HOW TO ASSEMBLE
HOW TO USE
964A00292-R0
Use only with Hoover® Cleaning Solutions
and follow the fill lines found on the
clean water tank when adding solution.
PRO TIP
POWERDASH™ PET
CARPET CLEANER
1.
Insert handle into upper handle pole.
1.
Remove Clean Water Tank, twist o water cap and
add warm water to the fill line.
5.
Step on the ON/OFF Pedal to turn ON.
2.
Insert the upper handle pole into the base.
2.
Add Hoover® cleaning solution to the solution fill
line then replace and tighten the cap.
6.
Slowly push forward then backwards while squeezing
the trigger to apply water and cleaning solution.
3.
Slide the Clean Water Tank securely into place on
the back of the unit.
3.
Slide the Clean Water Tank back into the unit.
7.
Release trigger then slowly push forward then
backwards to remove water and dry the carpet.
4.
Align the hooks on the nozzle cover to the arrows
on the unit and rock cover into place.
4.
Plug power cord into electric outlet. Step on the
Handle Release Pedal to recline the unit into the
cleaning position.
HOW TO ASSEMBLE
HOW TO USE
964A00292-R0
Use only with Hoover® Cleaning Solutions
and follow the fill lines found on the
clean water tank when adding solution.
PRO TIP
/