2. Reflying
  3. RST69

Reflying RST69 User manual

  • Hello! I've read the user manual for the Reflying MagSpeed RST69 Wireless Charging Station. This 3-in-1 station can wirelessly charge your phone, Apple Watch, and AirPods. The manual includes instructions on how to attach the metal ring for non-iPhone 12 devices, as well as how to use the indicator light. I am ready to answer any questions you have about the device.
  • How do I attach the metal ring for devices other than iPhone 12?
    Where do I place my Apple Watch to charge?
    What does the breathing red indicator light mean?
    What does solid blue indicator light mean?
    Which devices can be charged wirelessly?
    How can I achieve fast charging?
For devices other than iPhone 12 series and above, apply the metal
attachment ring to the outside of your phone case using the included
applicator guide. Metal attachment ring is to be applied directly on
the outside of phone cases only.
1. Place the guide over the back of your phone. Align your phone
vertically so that each edge matches the same number on both sides.
2. Align your phone horizontally so that each edge matches the same
letter on both sides.
3. If there are no obstructions, peel the protective layer from the metal
attachment ring, and apply them to your phone case using the
applicator guide.
device on the magnetic wireless output (B). Your device should
begin to wirelessly charge.
To achieve fast charging, ensure you are using a charger that is capable
of fast charging. Some cases may interfere with wireless charging if they
contain metallic material or are overly thick.
Place your AirPods wireless charging case on the wireless output 2 (C).
Your AirPods should begin to wirelessly charge. See below for indicator
light (D) statuses for the wireless output 2 (C).
Magnetic wireless output 1
Wireless output 2
Wireless output 3
Indicator light
Solid blue Powered and on standby
Breathing red Wirelessly charging
Flashing blue and red Foreign object on wireless output
RST69
5.0V⎓3.0A (15.0W)
9.0V⎓3.0A (27.0W)
12.0V⎓3.0A (36.0W)
5.0W, 7.5W, 10.0W, 15.0W
5.0W
5.0W
25.0W Max
Place your Apple Watch on the wireless output 3 (D).
Your Apple Watch should begin to wirelessly charge
USER MANUAL
MagSpeed 3-in-1
Wireless 15W Charging Station
Model: RST69
MagSpeed 3-in-1 Wireless
15W Charging Station
Hereby, Shenzhen Reflying Electronic Co., Ltd declares that this product is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address by clicking on the Compliance Documentation link at:
www.reflying.com
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your body.
Coil A: -11.66dBμA/m @10m
Coil B: -10.55dBμA/m @10m
Coil C: -17.85dBμA/m @10m
Coil A: 114.40-205.12 kHz
Coil B: 126.60-128.90 kHz
Coil C: 325.28-327.68 kHz
(for EU Compliance)
(for EU Compliance)
/