Dispho WS-19017-2 is a single-axis pan-tilt stabilizer with a remote controller, perfect for capturing smooth and stable videos and photos with your smartphone. It features a stable mode that keeps your phone level even when the holder is moved, making it ideal for vlogging, live streaming, or taking selfies. The remote control allows you to control the pan and tilt functions, as well as take pictures and videos remotely.
Dispho WS-19017-2 is a single-axis pan-tilt stabilizer with a remote controller, perfect for capturing smooth and stable videos and photos with your smartphone. It features a stable mode that keeps your phone level even when the holder is moved, making it ideal for vlogging, live streaming, or taking selfies. The remote control allows you to control the pan and tilt functions, as well as take pictures and videos remotely.
尺寸：60*100mm
材质：80g书纸
颜色：单黑
折页：风琴折
Quick Start Guide
SINGLE AXIX PAN-TILT STABILIZER
[Cloud Shadow 4]
Dispho
Bluetooth connection
Usage method
Power on after long pressing the power button for 3 seconds,
then turn on the phone bluetooth to enter search condition,
and click "Dispho" in the searched equipment. The blue light
will be on after the success of the connection.
Photograph key
Indicator lamp
2.Extend the monopod
1.Mount your phone onto
the selfie stick
3.Usage mode of pan-tilt holder
After clamping the mobile phone
and keeping the phone in natural
balance, then long press the power
button for 3 seconds to turn on the
mobile phone( Long press 3 seconds
to shut down）.
After starting up, it will enter the
stable mode, move the holder,
and the mobile phone will always
maintain a constant direction.
4.Non- pan-tilt mode
When the pan-tilt is shut down or out of power, the rotation
will screw tight to the locking direction, the rotation function
of the pan-tilt disappears, and it will become an ordinary
tripod selfie stick. (When the rotation is reset to the holder
end, the pan-tilt mode will be restored.)
Yuntai Rotary Locking button
5.Use the tripod
Open the bottom tripod, uplift the pull rod and put tripod
on horizontal plane.
Charging
1.Holder charging mode
Connect the Micro USB interface of the pan-tilt holder for
charging, and the red light will be on for a long time during
the process of charging；the redlamp will be off automatically
after charging is finished。
Micro USB interface
2.Charging Mode of Remote Controller
Connect the Micro USB interface charging, and the red light
will be on for a long time during the process of charging；the
redlamp will be off automatically after charging is finished。
Micro USB interface
Silicon rubber case for avoiding empty keys
When using the the mobile phone in horizontal screen status,
please use this accessory when the product cannot work
normally due to touching the keys of the mobile phone.
Tips
1.When the equipment clamps the platform bracket, try to
keep the equipment in the center, if not in the center, it is
recommended to use the vertical screen mode.
2.Selfie stick will enter sleep mode automatically if it is idled
for 5 min after Bluetooth connection; press photograph key
to recover connection.
Warnings
1. Watch your hands during use.
2. The product is not designed for children under 14 years
old.Do not swallow it.
3. Do not dismantle or modify the product.
4. Do not store the product in a humid environment.
5. Keep the product away from heat sources.
6. Do not expose the product to water or other liquids in
case of damage.
Winners' Sun Plastic & Electronics (Shenzhen)Co., Ltd.
Production Address: 1/F-4/F of Factory 6 & 3/F of Factory 2,
Detai Industrial Park, 496 Huarong Road,Langkou Community,
Dalang Sub-district, Longhua District, Shenzhen
horizontal or vertical imbalance, or
follow both of Fig. 1 and 2 in case of
horizontal and vertical imbalance);
dna semit 4 rof yek ”rewoP“ sserp trohs
tripod will vibrate continuously and
recover its functions to finish the
calibration.
3.When using the Remote control , when the battery is low,
the Remote control will have a flashing red light for
reminder. Charge the selfie stick promptly.
4.If the battery is running low, the indicator on the selfie stick
will flash red. Charge the selfie stick promptly.
5.
Notice: For any imbalance at horizontal
or vertical distance in running process,
please handle it as shown in diagram
below:
Open the tripod, fix the tripod head
with both hands and keep the balanced
direction (follow Fig. 1 or 2 in case of
Figure1
Figure2
Remote control functionProduct appearance
When the product is used for the first time,
the remote control can be used after being
paired. The power key of the tripod head
is turned on, and the “power key” is
synchronously turned on for turning on the
machine after long pressing “right rotating
key”, and then the tripod head pairing is
finished (it is not paired when it is used again)
Single click to circulate and rotate 90°
Double click and rotate 360°automatically
Long press for slow rotating, release the key
tripod head and stop at the appointed position
angle.
Single click to circulate and rotate 90°
Double click and rotate 360°automatically
Single click for taking pictures/recording videos
(it can record video in the recording mode)
Long press for slow rotating, release the key
tripod head and stop at the appointed position
angle.
1
27
8
9
10
11
12
3
4
5
6
1. Phone bracket
2. Micro USB port
3. Aluminum rod
4. Remote controller Indicator
5. Turn right key
6. Photo key
7. Pan-tilt switch key
8. Balcony indicator
9. Rotary lock
10. Power key of remote control
11. Turn left key
12. Tripod
Power key
Photo key
composite key
Turn right key
Turn left key
Long press for 3s to turn on/off
*Notes:
1. When the USB interface on the tripod head is upwards, it is normal
when there is no reaction after long pressing “right rotating key/
left rotating key” (when USB interface is upwards, “long press”
is limited on the software)
2. Long press “right rotating key/left rotating key” to rotate the USB
interface, and stop rotating when the left and right sides of the end
face inclines 30°
The device has been evaluated to meet general RF exposure requirement, The device can be used in
portable exposure condition without restriction
Federal Communication Commission (FCC) Radiation Exposure Statement
Power is so low that no RF exposure calculation is needed.
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications or changes to this equipment. Such modifications or changes could void the user’s
authority to operate the equipment.
-
1
-
2
Dispho WS-19017-2 is a single-axis pan-tilt stabilizer with a remote controller, perfect for capturing smooth and stable videos and photos with your smartphone. It features a stable mode that keeps your phone level even when the holder is moved, making it ideal for vlogging, live streaming, or taking selfies. The remote control allows you to control the pan and tilt functions, as well as take pictures and videos remotely.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
TRIPOD WS-21016 User guide
-
Ulanzi WS-20001 User manual
-
CHOETECH KH5S User manual
-
INKEE IRONBEE-2 User guide
-
Silvercrest SSP 2600 A1 Operating Instructions Manual
-
SelfieWorld Orbit Pro I Instructions Manual
-
Huawei P Smart Operating instructions
-
UGREEN LP586 Operating instructions
-
-
ATUMTEK ATSS052 51″ Selfie Stick Tripod User manual
