Jandy PRO Series Installation guide

Brand: Jandy

Model: PRO Series

Type: Installation guide

Jandy PRO Series: Transform Your Pool into a Luminous Oasis

With the Jandy PRO Series WaterColors LED Lights, elevate your pool experience to new heights. These energy-efficient lights offer a stunning array of color options, allowing you to create a vibrant and dynamic underwater ambiance. Customize the lighting to match your mood, occasion, or personal preferences with a simple touch of a button. Experience the magic of color therapy and set the perfect tone for relaxation, fun, or a lively pool party.

Jandy PRO Series: Transform Your Pool into a Luminous Oasis

H0305500 Rev B





       













          





              











Page 2  Jandy® Pro Series, WaterColors LED Lights | Installation Manual

  

 



 

 

3.1 PreparingtheLightFixtureforInstallation.......... 5

3.2 InstallingtheLightFixture................................. 6

 

 

4.1 PreparingtheLightFixtureforReplacement...... 6

4.2 ReplacingtheLightFixture................................ 7

 

 

5.1 WiringtoanAquaLink®RSControlSystem....... 8

5.2 WiringtoaTimeClock....................................... 8

5.3 WiringtoaSwitch............................................... 8



 

 

6.1 ToOperatetheLightandChangeColors........... 8

6.2 ToResettotheBeginningoftheColorSequence

  

  

 



9.1 JandyLargeWaterColorsLEDLight................ 14

9.2 JandySmallWaterColorsLEDLight................ 15

Page 3



Jandy® Pro Series, WaterColors LED Lights | Installation Manual

 







When installing and using this electrical equipment, basic safety precautions should always be followed, including the

following:





ExceptwhentheJandyProSeriesWaterColorsLEDLightsareinstalledinanareaoftheswimmingpoolthatis

notusedforswimmingandthelensisadequatelyguardedtokeepanypersonfromcontactingit,thelightshallbe

installedinoronawallofthepool,withthetopofthelensopeningnotlessthan18inches(457mm)belowthe

normalwaterlevelofthepool



TheJandyProSeriesWaterColorsLEDLightsareintendedforinstallationinfreshwaterandsaltwaterswimming

pools.Itisimportanttoensurethatthewetnichesinwhichthelightsareinstalledareintendedfortheirappropriate

application,eitherfreshwaterorsaltwaterpools.



Thisunderwaterlightmustbeinstalledbya

licensedorcertifiedelectricianinaccordancewiththeNationalElectricalCodeandapplicablelocalcodesand

ordinances.Improperinstallationwillcreateanelectricalhazard,whichcouldresultindeathorseriousinjuryto

poolorspausers,installers,orothersduetoelectricalshock,andmayalsocausedamagetoproperty.Readand

followthespecificinstructionsbelow.



Beforeinstallingthisunderwaterlight,readandfollowallwarningnoticesandinstructionsaccompanyingthislight.

Failuretofollowsafetywarningsandinstructionscanresultinsevereinjury,death,orpropertydamage.Call(707)

776-8200foradditionalfreecopiesoftheseinstructions.



Thismanualcontainsimportantinformationabouttheinstallation,operationandsafeuseofthis

product.Thisinformationshouldbegiventotheowner/operatorofthisequipment.

Page 4  Jandy® Pro Series, WaterColors LED Lights | Installation Manual

 

 

    

CPLVLEDS30 Large 12VoltAC 4.0 30feet StainlessSteel

CPLVLEDS50 Large 12VoltAC 4.0 50feet StainlessSteel

CPLVLEDS100 Large 12VoltAC 4.0 100feet StainlessSteel

CPLVLEDP100 Large 12VoltAC 4.0 100feet Plastic

CPLVLEDS50C Large 12VoltAC 4.0 50feet StainlessSteel

CPLVLEDS100C Large 12VoltAC 4.0 100feet StainlessSteel

CPLVLEDP100C Large 12VoltAC 4.0 100feet Plastic

CPHVLEDS30 Large 120VoltAC 0.4 30feet StainlessSteel

CPHVLEDS50 Large 120VoltAC 0.4 50feet StainlessSteel

CPHVLEDS100 Large 120VoltAC 0.4 100feet StainlessSteel

CPHVLEDP100 Large 120VoltAC 0.4 100feet Plastic

CPHVLEDS150 Large 120VoltAC 0.4 150feet StainlessSteel

CPHVLEDS250 Large 120VoltAC 0.4 250feet StainlessSteel

CPHVLEDS50C Large 120VoltAC 0.4 50feet StainlessSteel

CPHVLEDS100C Large 120VoltAC 0.4 100feet StainlessSteel

CPHVLEDP100C Large 120VoltAC 0.4 100feet Plastic

CSLVLEDS30 Small 12VoltAC 2.0 30feet StainlessSteel

CSLVLEDS50 Small 12VoltAC 2.0 50feet StainlessSteel

CSLVLEDS100 Small 12VoltAC 2.0 100feet StainlessSteel

CSLVLEDP100 Small 12VoltAC 2.0 100feet Plastic

CSLVLEDS50C Small 12VoltAC 2.0 50feet StainlessSteel

CSLVLEDS100C Small 12VoltAC 2.0 100feet StainlessSteel

CSLVLEDP100C Small 12VoltAC 2.0 100feet Plastic

CSHVLEDS30 Small 120VoltAC 0.2 30feet StainlessSteel

CSHVLEDS50 Small 120VoltAC 0.2 50feet StainlessSteel

CSHVLEDS100 Small 120VoltAC 0.2 100feet StainlessSteel

CSHVLEDP100 Small 120VoltAC 0.2 100feet Plastic

CSHVLEDS150 Small 120VoltAC 0.2 150feet StainlessSteel

CSHVLEDS250 Small 120VoltAC 0.2 250feet StainlessSteel

CSHVLEDS50C Small 120VoltAC 0.2 50feet StainlessSteel

CSHVLEDS100C Small 120VoltAC 0.2 100feet StainlessSteel

CSHVLEDP100C Small 120VoltAC 0.2 100feet Plastic

Page 5



Jandy® Pro Series, WaterColors LED Lights | Installation Manual

 











Thisunderwaterlightmustbeinstalledbyalicensed

orcertifiedelectricianoraqualifiedpoolserviceman

inaccordancewiththeNationalElectricalCodeand

allapplicablelocalcodesandordinances.Improper

installationwillcreateanelectricalhazard,whichcould

resultindeathorseriousinjurytopoolorspausers,

installersorothersduetoelectricalshock,andmay

alsocausedamagetoproperty.



Alwaysdisconnectthepowertothecolorlightatthe

circuitbreakerbeforeinstallingorservicingthelight.

Failuretodosocouldresultindeathorseriousinjury

toserviceman,poolorspausersorothersdueto

electricalshock.

 



 Theelectricianmustcompletepreparatorysteps

beforelightfixtureisinstalled.SeeFigure1.

Ensure that the pool meets the requirements of the

current National Electrical Code and all local codes

and ordinances. A licensed or certied electrician must

install the electrical system to meet or exceed those

requirements before the underwater light is installed.

Some of the requirements of the National Electrical

Code, which the pool electrical systems must meet, are as

follows:

1. The lighting circuit must have a Ground Fault

Circuit Interrupter (GFCI) for 120 volt models,

and must have an appropriately rated circuit

breaker.

2. The junction box (or, for 12 volt models, the low

voltage transformer) must be located at least eight

(8) inches above water level, at least four (4)

inches above ground level, and at least four (4)

feet from the edge of the pool. See Figure 1.

3. The light xture and all metal items within ve

(5) feet of the pool must be properly electrically

bonded to a reliable point of grounding.

4. The wet niche must be properly installed so that

the top edge of the underwater light’s lens is at

least 18 inches below the surface of the water in

the pool. See Figure 1.

5. The wet niche must be properly electrically

bonded and grounded via the No. 8 AWG ground

connector located at the rear of the niche. See

Figure 1.

 Tobecertainthatthepool’selectricalsystemmeets

allapplicablerequirements,theelectricianshouldalso

consultthelocalbuildingdepartment.

Use only approved wet niches (see following note) to

ensure a safe and proper installation.

 JandyProSerieslightsareETLlisted(ETLreport/

file3141154CHI)forinstallationwithonlythefollowing

manufacturer’swetnichefixtures:



JandyProSeries:PLNICLRG,PLNICVFLRG,

SSNICLRG1R,SSNICLRG1S

Pentair:620004,78210200thru700,

78210401,79206700

HaywardDuraNiche:SP0600U

Sta-Rite:05161-2352thru2369,05163-2395

thru2396



JandyProSeries:PLNICSM,SSNICSM,

Pentair:78241100,78242200,78242300

78243100thru300,78244100thru300,

79206600

HaywardDuraNiche:SP0601U

Sta-Rite:05166-1017thru1034,05167-1035

thru1037

Pentair® and Sta-Rite® are registered trademarks of Pentair, Inc.

Hayward® is a registered trademark and DuraNiche™ is a trademark of

Hayward Pool Products, Inc.

4" min.

48"

min.

8" min. Junction Box or Low

Voltage Transformer, to the

max water level of the pool.

18" min. to top of Lens.

11.50"

Concrete must be cut

back around Niche to

allow for a compacted

plaster seal.

Coil 4 ft. of light cable

around Fixture.

#8 AWG Ground

Connector bonding

is located at rear

of niche.

Rigid

Conduit

To GFCI, Circuit

Breaker and

Power Source.

16”

 



Page 6  Jandy® Pro Series, WaterColors LED Lights | Installation Manual

 

 Performthesestepsonlyaftertheelectricalsystem

requirementsaremet.

1. Feed cord through conduit to junction box,

leaving at least four (4) feet of cord at the light

xture to coil into the base of the light niche, see

Figure 1. The four (4) feet of cord allows the light

to be serviced after the pool is lled with water.

2. Cut the cord at the junction box, leaving at least

six (6) inches of cord to make connections.

3. Strip six (6) inches of the outer cord jacket to

expose the three insulated wires.

Be careful not to

damage the insulation on the three (3) inner wires.

4. Install strain relief over cord jacket and connect

all three (3) wires to the corresponding circuit

wires in the junction box. Install the junction box

cover.

5. Coil the 4-foot length of cord around the xture

or into the base of the pool niche, and place the

light assembly into the niche.

6. Engage the retainer tab on the bottom of the face

ring, then pivot the top of the xture inward and

tighten the special pilot screw.



Useonlythespecialpilotscrewprovidedwiththis

underwaterlight.Thisscrewmountsandelectrically

groundsthehousingsecurelytothemountingring

andwetniche.Failuretousethescrewprovidedcould

createanelectricalhazard,whichcouldresultindeath

orseriousinjurytopoolorspausers,installersor

othersduetoelectricalshock.

7. Fill the pool until the underwater light is

completely submerged in water before operating

the light for more than 10 seconds. Turn on

main switch or circuit breaker, and the switch,

which operates the underwater light, to check for

proper operation. Refer to Section 6, Operating

Instructions.



Neveroperatethisunderwaterlightformorethan

10secondsunlessitistotallysubmergedinwater.

Withouttotalsubmersion,thelightassemblywillget

extremelyhot,whichmayresultinseriousburnsorin

breakageofthebulborlens.Thismayresultinserious

injurytopoolorspausers,installers,orbystandersor

damagetoproperty.

 









Thisunderwaterlightmustbeinstalledbyalicensed

orcertifiedelectricianoraqualifiedpoolserviceman

inaccordancewiththeNationalElectricalCodeand

allapplicablelocalcodesandordinances.Improper

installationwillcreateanelectricalhazard,whichcould

resultindeathorseriousinjurytopoolorspausers,

installersorothersduetoelectricalshock,andmay

alsocausedamagetoproperty.



Alwaysdisconnectthepowertothecolorlightatthe

circuitbreakerbeforeinstallingorservicingthelight.

Failuretodosocouldresultindeathorseriousinjury

toserviceman,poolorspausersorothersdueto

electricalshock.

 



Verify that the pool meets the requirements of the current

National Electrical Code® (NEC) and all local codes

and ordinances. A licensed or certied electrician must

install the electrical system to meet or exceed those

requirements before the underwater light is installed.

Some of the requirements of the National Electrical

Code, which the pool’s electrical system must meet, are

as follows:

1. The lighting circuit must have a Ground Fault

Circuit Interrupter (GFCI) for 120 volt models,

and must have an appropriately rated circuit

breaker.

2. The junction box (or, for 12 volt models, the low

voltage transformer) must be located at least eight

(8) inches above water level, at least four (4)

inches above ground level or pool deck level, and

at least 48 inches from the edge of the pool or spa.

See Figure 1.

3. The light xture and all metal items within ve

(5) feet of the pool must be properly electrically

bonded to a reliable point of grounding.

4. The wet niche must be properly installed so that

the top edge of the underwater light’s lens is at

least 18 inches below the surface of the water in

the pool. See Figure 1.

Page 7



Jandy® Pro Series, WaterColors LED Lights | Installation Manual

5. The wet niche must be properly electrically

bonded and grounded via the No. 8 AWG ground

connector located at the rear of the niche. See

Figure 1.

To be certain that the pool’s electrical system meets

all applicable requirements, the electrician should also

consult the local building department.

 

 Performthesestepsonlyaftertheelectricalsystem

requirementsaremet.



Failuretobringthepool’selectricalsystemuptocode

requirementsbeforeinstallingtheunderwaterlight

willcreateanelectricalhazardwhichcouldresultin

deathorseriousinjurytopoolorspausers,installers,

orothersduetoelectricalshock,andmayalsocause

damagetoproperty.

 Thelightfixturemaybereplacedwithoutremoving

waterfromthepool.

1. Turn off the main electrical switch or circuit

breaker, as well as the switch, which operates the

underwater light.

2. Unscrew the special pilot screw at top of the

face ring and remove the light assembly from the

niche, and place the assembly on the deck.



Besuretokeepthespecialpilotscrewprovided

withthisunderwaterlight.Thisscrewmountsand

electricallygroundsthehousingsecurelytothe

mountingringandwetniche.Failuretousethescrew

providedcouldcreateanelectricalhazard,whichcould

resultindeathorseriousinjurytopoolorspausers,

installersorothersduetoelectricalshock.

3. Remove Junction Box cover, disconnect the light

xture wires and strain relief, and then pull the

cord out of the conduit from the niche.

4. Feed the new light xture cord through the

conduit from the niche to the Junction Box.

 Dependingonthelengthoftheconduit,specialtools

mayberequiredtopullthecordthroughtheconduit.

5. Leave at least four (4) feet of cord to coil around

the light xture or coiled into the base of the light

niche, see Figure 1. This allows the light to be

serviced after the pool is lled with water.

6. Cut the cord at the Junction Box, leaving at least

six (6) inches of cord to make connections.

7. Strip six (6) inches of the outer cord jacket from

the cord to expose the three insulated wires. Be

careful not to damage the insulation on the three

(3) inner wires.

8. Install the strain relief over the cord jacket and

connect all three wires to the corresponding

circuit wires in the junction box. Install the

junction box cover.

9. Reinstall the light assembly into the niche and

tighten the special pilot screw.



Useonlythespecialpilotscrewprovidedwiththis

underwaterlight.Thisscrewmountsandelectrically

groundsthehousingsecurelytothemountingring

andwetniche.Failuretousethescrewprovidedcould

createanelectricalhazard,whichcouldresultindeath

orseriousinjurytopoolorspausers,installersor

othersduetoelectricalshock.

10. Fill the pool until the underwater light is

completely submerged in water before operating

the light for more than 10 seconds. Turn on main

switch or circuit breaker, as well as the switch,

which operates the underwater light, to check for

proper operation. Refer to Section 6, Operating

Instructions.



Neveroperatethisunderwaterlightformorethan

10secondsunlessitistotallysubmergedinwater.

Withouttotalsubmersion,thelightassemblywillget

extremelyhot,whichmayresultinseriousburnsorin

breakageofthebulborlens.Thismayresultinserious

injurytopoolorspausers,installers,orbystandersor

indamagetoproperty.

Page 8  Jandy® Pro Series, WaterColors LED Lights | Installation Manual

 







 Thewillnot

operateproperlywithlightdimmers.Do not wire the

Jandy Pro Series Lights to any dimming circuitry.

To the extent allowed by code and capacity of the

electrical equipment, multiple Jandy Pro Series lights

may be controlled with a single switch so their colors will

always be synchronized.

Separate switches may be used to control the on/off

and color functions of each Jandy Pro Series light. It is

recommended that these switches be located next to each

other to facilitate simple color synchronization when

desired. All switches must be operated at the same time

to assure color synchronization. Otherwise, the lights will

work independently of each other.

 



The Jandy Pro Series WaterColors Lights can be wired

into the Jandy Pro Series AquaLink RS control system

to provide simplied operation of the lights, as well as a

means to synchronize the color change function. Connect

the lights to one of the auxiliary relays in the Power

Center.

 Itisrecommendedtoconnectonelightperrelayso

eachlightcanbecontrolledseparately.However,upto

fourlightscanbeconnectedonasinglerelay.Ifthere

aremorethanfourlightsinstalledononeAquaLinkRS

system,ensurethereismorethanoneauxiliaryrelay

availableinthePowerCenter.

Refer to Figures 2 and 3 to connect the Jandy Pro Series

Color Lights to the Power Center.



AGroundFaultCircuitInterrupter(GFCI)mustbe

providedfor120voltmodels.Theconductorsonthe

loadsideoftheGFCIcircuitshallnotoccupyconduit,

boxes,orenclosurescontainingotherconductors

unlesstheadditionalconductorsarealsoprotectedby

aGFCI.Refertolocalcodesforcompletedetails.

 TheJandyProSeriesWaterColorsLightsareavailable

in120-voltand12-voltversions.Ifinstallinga12-volt

light,a120-volt/12-voltstep-down(AC)transformer

mustbeused.Formoreinformationabout12-volt

installations,refertoSection 8ofthismanual.

 

The Jandy Pro Series WaterColors Lights can be wired

into a basic time clock to automatically turn on the lights

at a predesignated time. Refer to Figure 4 to connect the

lights into the time clock.

 

The Jandy Pro Series WaterColors Lights can be wired

into a switch to manually turn on/off the lights. Refer to

Figure 5 to connect the lights into the switch.

 





 



Turn the light ON. The rst time the light is turned on,

the color sequence begins with the Alpine White. To

change the color, turn the light OFF and then ON within

three (3) seconds. Continue turning OFF and ON until

the desired light color mode is reached. See Table 1 for

the color mode sequence.

 



 

1 AlpineWhite

2 SkyBlue

3 CobaltBlue

4 CaribbeanBlue

5 SpringGreen

6 EmeraldGreen

7 EmeraldRose

8 Magenta

9 Violet

10 SlowColorSplash

11 FastColorSplash

12 AmericatheBeautiful

13 FatTuesday

14 DiscoTech

WhenthelightisturnedOFFformorethanseven(7)

seconds,itwillremaininthecolorsetthatiscurrently

active.WhenthelightisturnedbackON,thelightwill

beonthesamecolorset.

Page 9



Jandy® Pro Series, WaterColors LED Lights | Installation Manual

GFCI

Black

White

Green

Ground

Neutral

120 VAC

Power Supply

Black

White

Green

JUNCTION

BOX

120V

LED

Light

 



Black

White

Green

Ground

Neutral

120 VAC

Power Supply

Black

White

Green

JUNCTION

BOX

12V

LED

Light

120V/12V

Transformer

Black

White

Green

 



Clock

Motor

Ground

Neutral

Line

A12

GFCI

Black

White

Green

Black

White

Green

JUNCTION

BOX

120V

LED

Light

120 V

SUPPLY

 



Ground

Neutral

Line

120 V

Supply

GFCI

Black

White

Green

JUNCTION

BOX

Black

White

SWITCH

Black

White

Green

120V

LED

Light

 



Page 10  Jandy® Pro Series, WaterColors LED Lights | Installation Manual

 















 12VoltAC R0474000



 120VoltAC R0474100



 12VoltAC R0473900



 120VoltAC R0473900



Besuretokeepthespecialpilotscrewfromthis

underwaterlight.Thisscrewmountsandelectrically

groundsthehousingsecurelytothemountingring

andwetniche.Failuretousethescrewprovidedcould

createanelectricalhazard,whichcouldresultindeath

orseriousinjurytopoolorspausers,installersor

othersduetoelectricalshock.

4. Pool Clamp Removal.

a. Loosen the Phillips head screws (six (6) for

small light, eight (8) for large light) to allow

the bottom clamp to be removed from the face

ring assembly. Do not remove the screws or the

retaining rings. The retaining rings prevent the

screws from falling free from the bottom clamp

and also aid in ease of assembly.

b. Remove the bottom clamp, the face ring

assembly, the glass lens, and the gasket from the

xture. Remove the gasket from the lens. Refer

to Section 9, Exploded View and Replacement

Parts.

5. Light Engine Replacement

a. 12V Small Light Engine (PCB) Replacement

1. Remove two (2) nuts and two (2) washers.

2. Unplug the quick disconnect terminals from

the light engine.

3. Remove the light engine from the light

xture.

4. Place new light engine into the xture with

the orientation shown in Figure 7.

5 Secure the light engine with one (1) nylon

washer and one (1) nut. Torque to 12 in-lbs.

6. Place a nylon washer on the other stud and

place the green ground wire terminal on the

nylon washer and secure both with the nut.

Torque to 12 in-lbs.

 



Turn the light OFF, wait four (4) to ve (5) seconds, then

turn ON, the light will return to the beginning of the color

cycle (Alpine White).

IfanAquaLinkRScontrolsystemisbeingusedthe

colorsetcanbeselectedusingtheindoorcontroller.

TosynchronizecolorsonmultipleJandyProSeries

WaterColorsLightsystemswiredtoseparateswitches,

performtheaboveactionsonalloftheirswitches

simultaneously.AllJandyProSeriesWaterColors

Lightswillsynchronizeautomaticallyifactivatedbythe

sameswitch.Nootheraccessoriesarerequired.

 





Alwaysdisconnectpowertothecolorlightatthe

circuitbreakerbeforeservicingthelight.Failuretodo

socouldresultindeathorseriousinjurytoinstaller,

serviceman,poolorspausersorothersdueto

electricalshock.

1. Turn off the main electrical switch or circuit

breaker, as well as the switch, which operates the

underwater light.

2. Be sure to have the following items:

• A new lens gasket, P/N R0451101 for the large

light or P/N R0400501 for the small light.

• A light engine. See Table 2 for specication.



Replacelightenginewiththesametype.Failure

toreplacethelightenginewiththesametypewill

damagethelightassemblyandmaycausean

electricalhazardresultingindeathorseriousinjuryto

poolorspausers,installers,orothersduetoelectrical

shock,andmayalsocausedamagetoproperty.Be

surethepowerisswitchedOFFbeforeremovingor

installingPCB.AllowPCBtocoolbeforereplacing.

3. To remove the light assembly, unscrew the special

pilot screw at the top of the face ring, remove

light assembly from niche and gently place

assembly on the deck. It is not necessary to drain

down the pool. See Figure 6.

Page 11



Jandy® Pro Series, WaterColors LED Lights | Installation Manual

POOL WALL

Power

Cord Niche

POOL LIGHT

ASSEMBLY

PILOT SCREW

Push up on

bottom of

light assembly

Power

Cord Niche

SPA LIGHT

ASSEMBLY SPA WALL

PILOT SCREW

Push up on

bottom of

light assembly

Unscrew pilot screw

and pull top of light

assembly away from

spa wall

Bonding

cable

Unscrew pilot screw

and pull top of light

assembly away from

pool wall

Bonding

cable

 





7. Plug in the quick disconnect wire (white

for the 12V and red for the 120V) onto the

terminal (AC1) of the light engine.

8. Plug in the quick disconnect wire (black for

the 12V and blue for the 120V) onto terminal

(AC2) of the light engine.

b. Large Light Engine (PCB) Replacement (120V

and 12V)

1. Remove three (3) nuts and washers.

2. Unplug the quick disconnect terminals from

the PCB.

3. Remove the light engine from the light

xture.

4. Place new light engine into the xture with

the orientation shown in Figure 8.

5 Secure the new light engine (PCB) with two

(2) nylon washers and two (2) nuts. Torque

to 12 in-lbs.

6. Plug in the white quick disconnect wire onto

the terminal (J2) of the light engine.

7. Plug in black quick disconnect wire onto

terminal (J6) of the light engine for the 12V

models; or terminal (J3) of the light engine

for 120V models.

8a. For 12V models, place a nylon washer on the

stud and place the green ground wire terminal

on the nylon washer and secure both with the

nut. Torque to 12 in-lbs.

8b. For 120V models, place the green ground

wire on the stud and secure with the nut.

Torque to 12 in-lbs.

6. Reassemble the xture.

a. If not already done, remove the gasket from

the glass lens and install a new gasket, P/N

R0451101 for the large light and R0400501 for

the small light, on the lens. On the small light,

remove the diverger from the lens.

 Anewlensgasketmustbeusedeachtimethelightis

reassembled.

Page 12  Jandy® Pro Series, WaterColors LED Lights | Installation Manual



Always

installanewlensgasketwheneverdisassemblingthe

light(JandyColorLightGasketP/NR0451101forlarge

lightandP/NR0400501forsmalllight).Failuretodo

somaypermitwatertoleakintotheassembly,which

couldcause:



(a)Anelectricalhazardresultingindeathorserious

injurytopoolorspausers,installers,orothersdueto

electricalshock,or



(b)AmalfunctionoftheJandyWaterColorsLight,

whichlikewisecouldresultinseriousinjurytopoolor

spausers,installers,orbystanders,orindamageto

property.

AC1 AC2

Black (12V)

Blue (120V)

White (12V)

Red (120V)

Green

Nylon

Washer

Nut

Light

Engine

Secure

First

 



120V Wiring12V Wiring

White

Green

Black

White

Green Black

Nylon

Washer

Nut

Secure

First

Secure

First

 



b. While holding the xture upright, place the glass

lens with the gasket on top of the xture. Please

note that the lens gasket is not symmetrical.

Therefore, it must be installed correctly so that

the lens can seal to the xture housing. Place the

gasket on the lens so that the thick molded side

of the gasket will mate with the housing when

the lens is installed, see Figure 10. On the small

light, replace the diverger by tucking the tabs

between the lens and gasket.

 Besuretofacethedullsideofthedivergerdown

towardsthePCB.

c. Position the lens and gasket on the xture. Place

the face ring assembly over the lens and align

the pilot screw with the small arrow mark on the

face of the lens. Note that the small arrow mark

on the face of the lens and the pilot screw of the

face ring must be aligned with the arrow located

on xture label that reads, “Arrow on this label

must line up with the pilot screw on the Face

Ring”. See Figure 9.

d. While holding the aligned face ring assembly

and xture together, turn the assembly upside

down and set it on the old gasket, using the old

gasket as an assembly xture. This will keep the

lens and gasket assembly from being pushed out

of the face ring while you secure it to the light

xture.

e. Spread the bottom clamp over the electrical cord

and slide it onto the back of xture to the top

clamp.

f. Tighten the Phillips head screws (eight (8) for

large light and six (6) for small light) on the

light in alternating cross-pattern. Torque screws

to approximately 20 in-lbs. Do not over-tighten.

g. Discard the old gasket.

Page 13



Jandy® Pro Series, WaterColors LED Lights | Installation Manual

Alignarrowofthe

lenswiththepilot

screw

Alignpilotscrewwith

thearrowlocatedon

thexturelabel

 





7. Reinstall the Jandy Pro Series Light into niche

xture.

a. Coil the extra four (4) feet of cord around the

xture or into the base of the niche and place the

light assembly into the niche.

b. Engage the retainer tab on the bottom of the face

ring, then pivot the top of the xture inward and

tighten the special pilot screw.



Useonlythespecialpilotscrewprovidedwiththis

underwaterlight.Thisscrewmountsandelectrically

groundsthehousingsecurelytothemountingring

andwetniche.Failuretousethescrewprovidedcould

createanelectricalhazard,whichcouldresultindeath

orseriousinjurytopoolorspausers,installersor

othersduetoelectricalshock.

8. If pool is empty, ll the pool until the underwater

light is completely submerged in water before

operating the light for more than 10 seconds. Turn

on main switch or circuit breaker, as well as the

switch, which specically operates the underwater

light, to check for proper operation.



Neveroperatethisunderwaterlightformorethan

10secondsunlessitistotallysubmergedinwater.

Withouttotalsubmersion,thelightassemblywillget

extremelyhot,whichmayresultinseriousburnsorin

damagetothelight.Thismayresultinseriousinjury

topoolorspausers,installers,orbystandersorin

damagetoproperty.

Thickmolded

sideofthe

gasketmust

matewith

thebodyof

thehousing

 



 



A separate 12-Volt AC Transformer is required on all 12-

Volt Models. For Jandy Pro Series WaterColors Light

use a 150-watt multi-tap 12-volt system per light.

 ForoptimumperformanceJandyProSeries

recommendstouseonetransformerper12-voltlight.

To ensure maximum safety, it is strongly recommended

that a transformer that has been listed or recognized by

a Nationally Recognized Testing Laboratory (NRTL) for

the application be used.

Page 14  Jandy® Pro Series, WaterColors LED Lights | Installation Manual

 

 

1 2 3 54 6 7

 

   

1 N/A WaterColorsLightHousing NO - Purchase New Light

2 R0474000 LightEnginePCB,12VLargeLEDLightw/LightShaping

Diverger



2 R0474100 LightEnginePCB,120VLargeLEDLightW/LightShaping

Diverger



3 R0451101 SiliconeGasket 

4 R0450601 GlassLens 

5 R0450701 ClampAssembly 

6 R0450801 FaceRing,StainlessSteel(SS) 

6 R0450802 FaceRing,Plastic,Whitet 

6 R0450803 FaceRing,Plastic,Black 

6 R0450804 FaceRing,Plastic,Gray 

6 R0450805 FaceRing,PlasticSet 

7 R0450901 PilotScrew,withRetainer 

8 R0451001 ClampScrews(8Screwsand8Retainers) 

Page 15



Jandy® Pro Series, WaterColors LED Lights | Installation Manual

 

1 2

467

 

   

1 N/A WaterColorsLightHousing NO-PurchaseNewLight

2 R0473900 LightEngine,12V/120VSmallLEDLight 

3 R0474200 Diverger,LightShaping,SmallLEDLight 

4 R0400501 SiliconeGasket 

5 R0400601 GlassLens 

6 R0451201 ClampAssembly 

7 R0451301 FaceRing,StainlessSteel(SS) 

7 R0451302 FaceRing,Plastic,White 

7 R0451303 FaceRing,Plastic,Black 

7 R0451304 FaceRing,Plastic,Gray 

7 R0451305 FaceRing,PlasticSet 

8 R0450901 PilotScrew,withRetainer 

9 R0451401 ClampScrews(6Screwsand6Retainers) 

Zodiac Pool Systems, Inc.

2620 Commerce Way, Vista, CA 92081

1.800.822.7933 | www.ZodiacPoolSystems.com

ZODIAC® is a registered trademark of Zodiac International, S.A.S.U., used under license.

All trademarks referenced herein are the property of their respective owners.

PX SERIES LOW VOLTAGE

LANDSCAPE AND SWIMMING

POOL/SPA LIGHT TRANSFORMERS

INSTALLATION

OPERATION &

SERVICE MANUAL

Model: PX100 and PX100S - 100 Watt Transformers

INPUT: 120 V.AC, OUTPUT: 12 V.AC or 13 V.AC

Model: PX300 and PX300S - 300 Watt Transformers

INPUT: 120 V.AC, OUTPUT: 12 V.AC, 13 V.AC or 14 V.AC

Suitable for direct connection to underwater lights and for Indoor/Outdoor installations except in CANADA - Low

Voltage Landscape Lighting installation - Outdoor only.

Read and follow the safety instructions listed below and other basic safety precautions before installation or

operation of this transformer and other associated equipment.

These Safety Transformers are specifically designed to

supply 12 volts to pool/spa lights, submersible fixtures

and outdoor garden lights. A grounded shield between

the primary and secondary windings assures safe

operation and the built-in circuit protection will disconnect

power to the transformer in case of defect or overload.

These transformers are suitable for direct connection to

underwater Pool and Spa lights.

SPECIFICATIONS

Enclosure Size: 7 1/4” (19.4 cm) high x 5 1/4” (13.3 cm) wide

x 4 1/2” (11.4 cm) deep. Mounting brackets top and bottom.

Enclosure Type: (A) 0.048” corrosion resistant steel with

electrostatically applied beige coating. (B) 0.036” stainless

steel.

Knockouts: Total of ten 1/2”-3/4” combination.

(4) bottom, (2) right side, (2) left side, (2) back.

GENERAL INFORMATION

Model Input Secondary Output Enclosure

60 Hz. Lamp Watts* Volts Type

PX100 120V. 1 Amp Max. 100 Max. 12 or 13 A

PX100S 120V. 1 Amp Max. 100 Max. 12 or 13 B

PX300 120V. 3 Amp Max. 300 Max. 12, 13 or 14 A

PX300S 120V. 3 Amp Max. 300 Max. 12, 13 or 14 B

* Any combination of bulbs, any tap.

• If installation involves running wire through a building structure, special wiring methods are needed.

 • Donotsubmergetransformer.

• Donotconnecttwoormoretransformersinparallelorusewithdimmers.

Risk of Injury or Property Damage!

• Thistransformermustbeinstalledbyaqualifiedelectrician,accordingtotheNationalElectricalCodes(including article

  680)orCanadianElectricalCode(includingsection68)and,localrequirements.

 • USECOPPERCONDUCTORSONLY.

 • Donotexceedthemaximumratingsofindividualcomponents,wiringdevices,andcurrentcarryingcapacityof

conductors.

 • Donotinstallthisequipmentwithin5feet(3metersforCanadianinstallations)ofanybodyofwater.

 • Iftransformerisusedfordirectconnectionofunderwaterlights,refertoNEC680-24(b)orCEC68-060,062and066for

further details.

 • ForCanadianinstallations,supplycircuitmustbeprotectedbyagroundfaultcircuitinterrupter.

 • Installationissubjecttoapprovalbythelocalinspectionauthority.

WARNING Risk of Fire or Electrical Shock!

CAUTION

Because of our commitment to continuing research and improvements, Intermatic Incorporated reserves the right to make changes, without notice, in the specifications and material

contained herein and shall not be responsible for any damages, direct or consequential, caused by reliance on the material presented.

INTERMATIC INCORPORATED, SPRING GROVE, IL 60081-9698

http://www.intermatic.com

158--01002

Pool/Spa Underwater Lighting Application

LANDSCAPE LIGHTING APPLICATIONS

INSTALLATION

For field wiring information, please refer to the instructions attached to inside of front cover.

• Theenclosureofthetransformermustbeprovidedwithafail-proofgroundasrequiredbyNEC,

  Article680andanyapplicablelocalcodesForCanadianinstallations,thesupplycircuitmustbe

protected by a ground fault circuit interrupter.

 • Fordirectwiringofunderwaterlights,theinstallationmustcomplywitharticle680-24(b)ofthe

  NationalElectricalCode,orarticles68-060,062and066oftheCanadianElectricCode.

 • Thetransformershouldbemountedatleast1footabovethedecklevelwiththefieldwiring

compartment down.

 • Makesurethatallunusedtaps(leads)areseparatelyinsulated.

 • Usethefollowingtablesasaguidetodeterminethecorrectwiresize.

 • Checkvoltageatlampterminalsafterinstallation.Itshouldbe12±0.3volts.

Distance* 2#6AWG 2#8AWG 2#10AWG 2#12AWG 2#14AWG

Feet

5 Ft. 12V 12V 12V 12V 12V

30 Ft. 12V 12V 12V 13V 13V

60 Ft. 12V 12V 13V 13V

90 Ft. 12V 13V 13V

120 Ft. 13V 13V

150 Ft. 13V 13V

180 Ft. 13V

210 Ft. 13V

240 Ft. 13V

* Length of run to light from transformer.

Distance* 2#6AWG 2#8AWG 2#10AWG 2#12AWG

Feet

5 Ft. 12V 12V 12V 12V

10 Ft. 12V 12V 12V 13V

20 Ft. 12V 12V 13V 13V

30 Ft. 12V 13V 13V 14V

40 Ft. 13V 13V 14V

50 Ft. 13V 13V 14V

60 Ft. 13V 14V

70 Ft. 13V 14V

80 Ft. 13V 14V

90 Ft. 14V

100 Ft. 14V

110 Ft. 14V

* Length of run to light from transformer.

120 Volt Primary Input - 100 Watt Output 120 Volt Primary Input - 300 Watt Output

LIMITED ONE YEAR WARRANTY

Ifwithinthewarrantyperiodspecified,thisproductfailsduetoadefectinmaterialorworkmanship,IntermaticIncorporatedwillrepairorreplaceit,

at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not transferable. This warranty does

not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which have been

subjecttounauthorizedrepair,opened,takenapartorotherwisemodified;(c)unitsnotusedinaccordancewithinstructions;(d)damagesexceeding

thecostoftheproduct;(e)sealedlampsand/orlampbulbs,LED’sandbatteries;(f)thefinishonanyportionoftheproduct,suchassurfaceand/or

weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs, removal costs, or reinstallation costs.

INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW

THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY

NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES,

INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY

MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY

PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE

LIMITATION MAY NOT APPLY TO YOU.

This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) completing a warranty

claimon line atwww.intermatic.com. This warrantyismade by:IntermaticIncorporatedCustomerService/7777 WinnRd.,Spring Grove,Illinois60081-9698

815-675-7000 http://www.intermatic.com

SELECT CABLE.SeeChart.

• Failuretouseappropriategaugecableorinstallitas

directed in these instructions and chart may result in

 RiskofFireorElectricShock.

• UseonlyCSAorULapprovedlow-voltagecable.

• Lowvoltagecableshallbeburiedamaximum6inches

(15.2 cm) in order to connect to the main low voltage

cable.

Transformer Wattage Minimum Gauge Cable

300 12

100 16-14-12