2. Computers & electronics
  3. TVs & monitors
  4. Flat panel accessories
  5. Schneider
  6. LR9G 225A
LR9G 225A

Schneider LR9G 225A Operating instructions

  • I've reviewed the End of Life Instructions for the Schneider Electric Thermal overload relay LR9G 225A Spring. This document details the proper disposal and recycling procedures, along with information on the device's components and materials. I'm ready to answer any questions you might have about this document's contents or the device itself.
  • What is the main purpose of the LR9G225 thermal overload relay?
    What does the document contain?
    What is the recyclability potential of the product?
ENVEOLI2105014_V1 - End of Life Instructions - Thermal overload relay LR9G 225A Spring
Product End of Life Instructions
Thermal overload relay LR9G 225A Spring
ENVEOLI2105014_V1 09/2021
ENVEOLI2105014_V1 - End of Life Instructions - Thermal overload relay LR9G 225A Spring
Weight (in
g)
100
36%
Additional information
The main purpose of Tesys LR9G225 thermal overload relays is to detect overload currents in
order to protect the motor
LR9G225
Date of information release
784 g
09/2021
Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1,
20 Sep. 2008 presented to the French Agency for Environment and Energy
Management: ADEME).
In case of special transportation:
transportation method
Legal information
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). The product family must be disposed according to the
legislation of the country. This document is intended for use by end of life recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of life treatment for the
components and materials of the product.
No
Product function
Product reference
Total representative product mass
Representative product dimensions
Recyclability potential
103 x 106 x 126 mm
Product description
Manufacturer identification
Schneider Electric Industries SAS
Electronic Board (Communication) > 10cm²
End of Life Instructions
Comment
Number on
drawing
Component / Material
1
40 CM2 X 2
Brand name
Schneider Electric
1
ENVEOLI2105014_V1 09/2021
ENVEOLI2105014_V1 - End of Life Instructions - Thermal overload relay LR9G 225A Spring
www.schneider-electric.com Published by Schneider Electric
ENVEOLI2105014_V1 © 2019 - Schneider Electric – All rights reserved
RCS Nanterre 954 503 439
Capital social 896 313 776 €
09/2021
Country Customer Care Center
http://www.schneider-electric.com/contact
35, rue Joseph Monier
CS 30323
F- 92506 Rueil Malmaison Cedex
Schneider Electric Industries SAS
ENVEOLI2105014_V1 09/2021
/