Digitus DN-19 SRV-42U-8-GD Datasheet

DATASHEET

Server cabinets with glass door

DN-19 SRV-42U-8-GD

4016032170150

The DIGITUS server cabinets are especially suitable

for server and switches with high installation depth.

The reasoned construction ensures on effectively air

circulation and cooling for installed devices.

• 1.5mm - 2mm strong sheet steel with a high loading capacity,

powder coated

• Side sections detachable and lockable

• Ventilation slots for active and passive ventilation and exhaustion

• Protection rating IP 20

• Glas front door, opening angle 180° with lockables wing handle

• Perforated double-wing steel rear doors

• Spring-mounted hinges enable easy installation of the door or door

change

• 3-point locking system, optionally available with cylinder lock

• Suitable for all server types with 19" mounting

• 483mm (19") profile rails on the front side, adjustable in depth

• Large cable entry with rubber-edged sliding mechanism on the floor

• Height-adjustable levelling feet for the equalisation of uneven floors

• Tilt-prevention mechanism when pulling out servers

• Roof module for ventilation unit

• Complying with international standards IEC 297-1/2 and IEC

917-2-1

• Extensive range of accessories available

• Color: light grey, RAL 7035

• Loading capacity: 1000kg

• Units: 42

• Dimensions (HxWxD): 2049mm