Peerless DCS400, DCS200 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Peerless DCS400 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TECHNICAL DATA SHEET
Structural Ceiling Plate with Decoupler
Peerless Industries. Inc.
3215 W. North Ave. phone: (708) 865-8870
Melrose Park, IL 60160 fax: (708) 865-2941
Issued: 07-15-94 Sheet #: 142-9501-4 05-20-02 page 1 of 1
MODELS: DCS 200, DCS 400
DCS 400
Structural Ceiling Plate with Decoupler
for Peerless Multi-Display
TM
TV Mounts.
Unit has stub fitting for attachment of
adjustable length extension column.
Ceiling Plate attaches to concrete beam,
slab, or other structural member.
Column attaches to stub with 60mm long
carriage bolt and center lock nut.
CEILING
MULTI-DISPLAY MOUNT
(for two to six TV's)
EXTENSION
COLUMN
STUB
DCS 200
Structural Ceiling Plate with Decoupler for
Peerless Jumbo
TM
TV Mounts.
Unit has 1 1/2-11.5 NPT fitting for attachment
of fixed or adjustable length extension
column. Ceiling Plate attaches to concrete
beam, slab, or other structural member.
CEILING
HORIZONTAL CROSS SUPPORT
(top of Jumbo Mount TV bracket)
EXTENSION
COLUMN
60mm long curved
carriage bolt is used as a
pin to attach extension
column to stub. Centere
lock nut
secures the
assembly.
Architects Specifications:
The ceiling plate shall be a Peerless model DCS_________ and shall be located
where indicated on the plans. It shall consist of a structural ceiling plate with an
integral decoupler assembly to relieve stress (caused by side to side or swaying
action that may result from minor impacts) from damaging TVs/monitors. The ceiling
plate shall be UL Listed. The finish shall be Raven Black Fused Epoxy. Installation
shall be made in accordance with the instructions provided by the manufacturer.
*COMBINED
BALANCED
LOAD
CAPACITY:
1200 LBS.
*COMBINED
BALANCED
LOAD
CAPACITY:
300 LBS.
*Total weight of components and hardware
Protected by U.S. Patent no. 5,127,617. Other U.S. and international patents pending.
.28" OPENING
7 mm
9.3"
236mm
8.5"
216mm
2.5"
63.5mm
2.5"
63.5mm
BOTTOM VIEW
ISOMETRIC VIEW
DCS 200
Dimensions shown are common
to both DCS 200 and DCS 400
© 2002 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
2.8"
71mm
5.8"
147mm
SIDE VIEW (DCS 200)
SIDE VIEW (DCS 400)
.375"DIA.
9.5mm
(12 PLCS.)
R
This product is intended for use with
UL Listed products and must be
installed by a qualified professional
installer.
/