Bluetake Technology BT500 User manual

Category
Mice
Type
User manual
BT500+ Bluetooth Rechargeable Super Mini Mouse
Quick Setup Guide
- Appearance -
1. Right Button
2. Scrolling Wheel (Pairing LED)
3. Left Button
4. Battery Recharge Port
5. Battery Cover
6. Optical Sensor
7. Power Switch
8. Pairing Button
Function LED
Charging Mode Constant Red
Fully Charged Green On
Pairing Mode Blue On
Note: For the max. power saving, please turn the
BT500+ power off when you shut-down your
computer.
- Before Using -
1. Install batteries.
2. Turn the power on.
3. Pair the BT500+ Bluetooth Super Mini
Mouse with your computer.
Note: Please make sure that your Bluetooth
software supports HID (Human Interface
Device) profile before the pairing
process.
- Install Batteries -
1. Press and Push raised area to open the battery
cover.
2. Install two bundled Ni-MH AAA batteries into the
BT500+ Bluetooth Super Mini Mouse’s battery slot.
3. Slide battery cover back into position.
- Pairing Process -
For IVT Bluesoleil
1. Press and hold the Pairing button until the scroll
wheel glows blue light to indicate the mouse is
ready for pairing.
2. Double-click on “”Bluesoleil” icon from Windows
desktop.
3. Double-click on “My Device” icon in the main
window of Bluesoleil to search new Bluetooth
device.
4. When BT500+ is searched, select “BT500” icon
and the HID profile icon will turns to yellow.
5. Right click the HID profile icon and select “Connect”
to start the connection process.
6. When connection starts, Bluesoleil will
automatically install HID driver and please wait a
moment until the “Your new hardware is installed
and ready to use” shows in your task bar, now the
connection is established.
7. When connection process completed, a
connection link will be shown on the Bluesoleil
main window.
Once the connection between BT500+ Bluetooth Super
Mini Mouse and your computer is established, the
connection will keep permanently. That means the
connection will re-establish automatically when the
Windows runs.
For WIDCOMM BTW
1. Press and hold the Pairing button until the scroll
wheel glows blue light to indicate the mouse is
ready for pairing.
2. Double-click on “”My Bluetooth Places” icon from
Windows desktop.
3. Double-click on Bluetooth Setup Wizard icon from
“My Bluetooth Places” window.
4. Select “I know the service I want to use and ...” and
press Next button to continue.
5. Select “Human Interface Device” and then press
Next button to continue.
6. The Bluetooth Setup Wizard starts to search for
Bluetooth HID device in the vicinity. The BT500+
Bluetooth Super Mini Mouse icon will be displayed
in the window when it is found.
7. Please select the BT500+ Bluetooth Super Mini
Mouse icon and then press Next button to
continue.
8. The Bluetooth Setup Wizard takes several
seconds to configure related files to your system.
Please press Finish button to complete the pairing
process after the configuration.
Once the connection between BT500+ Bluetooth Super
Mini Mouse and your computer is established, the
connection will keep permanently. That means the
connection will re-establish automatically when the
Windows runs.
2
3 1
For Toshiba Bluetooth Stack
1. Press and hold the Pairing button until the scroll
wheel glows blue light to indicate the mouse is
ready for pairing.
2. Right-click on the Bluetooth icon in the
task tray, and then click on [Add New
Connection].
5
3. Please choose [Custom Mode], and then
click on the [Next] button.
4. SelectBT500” from [Device List], and
then click on the [Next] button. Please
choice the [Human Interface Device], then
click on the [Next] button.
5. Enter the device name, and then click on
the [Next] button. Click on the [Finish]
button.
6. Right-click on the Bluetooth icon in the
task tray, and then click on [Bluetooth
Settings]. Double click on the mouse icon,
make sure BT500+ is connected with your
computer.
8
4
6 7
BT500+ Bluetooth Rechargeable Super Mini Mouse
Quick Setup Guide
For Windows XP SP2
1. Press and hold the Pairing button until the scroll
wheel glows blue light to indicate the mouse is
ready for pairing.
2. Open the Windows control panel, then select
“Bluetooth devices”.
3. Click “Add…”
4. Select “My device is setup and ready to be found”,
then click “Next”
5. In “Peripherals (keyboards, mice, joysticks)”, select
“BT500” icon, and then click “Next”.
6. Select “Don’t use a passkey”, then click “Next”.
7. The Windows will start to connect BT500+
Bluetooth Super Mini Mouse automatically. Please
press Finish button after the connection process
completed.
Once the connection between BT500+ Bluetooth Super
Mini Mouse and your computer is established, the
connection will keep permanently. That means the
connection will re-establish automatically when the
Windows runs.
For Mac OS X 10.2.6 or later
1. Press and hold the Pairing button until the scroll
wheel glows blue light to indicate the mouse is
ready for pairing.
2. Click the Bluetooth icon on the task bar and select
“Setup Bluetooth device”.
3. Click “Continue” when the “Bluetooth Setup
Assistant” shows up.
4. Choose “Mouse” and then press “Continue” to the
next step.
5. The “Bluetake BT500+ Mouse” is found by
Bluetooth, please press “Continue” to the next step.
6. Click “Continue” when the “Passkey exchange with
your mouse” shows up.
7. The process is finished successfully. The BT500+
Mouse is working now.
Now you can use the BT500+ Bluetooth Super Mini
Mouse wirelessly with the Bluetooth-enabled Apple
computer. Afterward, the connection of the two
Bluetooth-enabled devices will re-establish automatically
when the Mac OS X runs.
- Recharging Process -
1. Insert USB connector of USB Charging cable into
your computer.
2. Insert USB charging cable* into the Battery
Recharge Port of BT500+. The recharge
batteries inside the BT500+ will be recharged
automatically.**
Note:
* Please only use the bundled USB cable and
batteries for recharging process.
** Please only recharge batteries while the
batteries are fully run out of power to
maximum the battery life.
Federal Communications Commission
(FCC) Statement
RADIO FREQUENCY INTERFERENCE STATEMENT
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: 1) this device may not
cause harmful interference, and 2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try correct the
interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
Any special accessories needed for compliance must be specified in
the instruction manual.
You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.
Copyright ® 2006 Bluetake Technology Co.,
Ltd. All Rights Reserved.
Trademark(s)
TM
and Registered Trademark(s)®
The "Bluetake" name and logo are trademarks of
Bluetake Technology Co., Ltd.
The “Bluetooth” word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Bluetake Technology Co., Ltd. is under license.
“Microsoft” and “Windows" are registered
trademarks of Microsoft Corporation.
“Apple”, “Mac” and “Mac OS” word marks and logos
are registered trademarks of Apple Computer, Inc.
“BlueSoleil” is the registered trademark of IVT Inc.
“WIDCOMM” is the registered trademark of
Broadcom Corporation.
“Toshiba Bluetooth Stack” is the registered
trademark of Toshiba Inc.
Other trademarks and trade names are those of their
respective owners.
Taiwan Headquarter
Tel: +886-2-2664-7199
USA, California
Tel: +1-626-369-9888
Mexico
Tel: +52-55-3096-5321
E-mail:
mexico@bluetake.com
Japan, Tokyo
Tel: +81-424-42-8268
E-mail: japan@bluetake.com
Singapore
Tel: +65-6743-2300
Hong Kong
Tel: +852-9777-8785
  • Page 1 1
  • Page 2 2

Bluetake Technology BT500 User manual

Category
Mice
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI