Artikel-Info
PCI Schnittstellenkarte eSATA | 2 x S-ATA | 1 x IDE | M-CAB®
Technische Daten:
- Erweiterung 2x S-ATA, Einbau : PCI Bus 32 Bit intern
- Extern : 1x serial ATA Buchse eSATA
- Intern : 1x serial ATA Buchse SATA + 1x IDE
- Automatische IRQ Adressierung
- Max. Geschwindigkeit: 150 Mbps
- Interner Überspannungsschutz
- Plug and Play
- RoHS konform, FCC, CE
Features
- 1 Internal + 1 External SATA & 1 channel IDE PCI Card
- Complies with Serial ATA Specification Revision 1.0
- Supports two independent Serial ATA channels
- Supports ONE extend Serial ATA port (external)
- Support data transfer rates of up to 150Mbps per SATA channel
- Single channel master mode hard disk controller supporting
two enhanced IDE devices
- Supports ATA PIO mode 4, multi-word DMA mode 2 drivers and
Ultra DMA- mode6 Extension to Ultra DMA-133 interface for up to 133MB/s transfer rate
- Supports PCI 2X mode and PCI native modes
Art-Nr.
7100066
Bezeichnung :
PCI Karte | eSATA | 1x eSATA ex. | 1x S-ATA in. | 1x IDE in.
Donnerstag, 24. April 2008
SEITE 1 VON 1
Druckfehler und Irrtümer vorbehalten
/