Optoma CinemaX P2 Owner's manual

User manual

DLP

®

Projector

English

2

TABLE OF CONTENTS

SAFETY ............................................................................................... 4

Important Safety Instruction....................................................................................................... 4

Cleaning the Lens...................................................................................................................... 5

Laser Radiation Safety Information ........................................................................................... 6

3D Safety Information ................................................................................................................ 7

Copyright ................................................................................................................................... 8

Disclaimer .................................................................................................................................. 8

Trademark Recognition ............................................................................................................. 8

FCC ........................................................................................................................................... 8

Declaration of Conformity for EU countries ............................................................................... 9

WEEE ........................................................................................................................................ 9

INTRODUCTION ............................................................................... 10

Package Overview.................................................................................................................... 10

Standard accessories ............................................................................................................... 10

Product Overview ..................................................................................................................... 11

Connections.............................................................................................................................. 12

Keypad and LED indicators ...................................................................................................... 12

Remote control ......................................................................................................................... 13

Pairing your Bluetooth remote control with the projector .......................................................... 14

SETUP AND INSTALLATION ........................................................... 15

Installing the projector .............................................................................................................. 15

Connecting sources to the projector ......................................................................................... 16

Adjusting the projector image ................................................................................................... 17

Remote setup ........................................................................................................................... 18

USING THE PROJECTOR ............................................................... 19

Powering on / o the projector .................................................................................................. 19

Using the projector as wireless speaker ................................................................................... 23

Home screen overview ............................................................................................................. 24

System date and time ............................................................................................................... 24

Projector settings menu (OSD)................................................................................................. 25

System settings menu .............................................................................................................. 37

Selecting an input source ......................................................................................................... 48

Selecting an app ....................................................................................................................... 49

Supported multimedia formats.................................................................................................. 50

Viewing the status bar .............................................................................................................. 54

About the Quick menu .............................................................................................................. 54

English

3

ADDITIONAL INFORMATION .......................................................... 55

Compatible resolutions ............................................................................................................. 55

Image size and projection distance .......................................................................................... 56

Remote control ......................................................................................................................... 57

Troubleshooting ........................................................................................................................ 60

LED lightning messages ........................................................................................................... 62

Specications ........................................................................................................................... 64

Optoma global oces ............................................................................................................... 65

English

4

SAFETY

The lightning ash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may be of sucient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

Please follow all warnings, precautions and maintenance as recommended in this user’s guide.

To avoid electric shock, the unit and its peripherals must be properly grounded (earthed).

This equipment is equipped with a three-pin grounding-type power plug.

Do not remove the grounding pin on the power plug.

This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the grounding plug.

Important Safety Instruction

 Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from

over heating, it is recommended to install the projector in a location that does not block ventilation.

As an example, do not place the projector on a crowded coee table, sofa, bed, etc. Do not put the

projector in an enclosure such as a book case or a cabinet that restricts air ow.

 To reduce the risk of re and/or electric shock, do not expose the projector to rain or moisture. Do not

install near heat sources such as radiators, heaters, stoves or any other apparatus such as ampliers

that emits heat.

 Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short

out parts that could result in re or electric shock.

 Do not use under the following conditions:

± In extremely hot, cold or humid environments.

(i) Ensure that the ambient room temperature is within 5°C ~ 40°C (41°F ~ 104°F)

(ii) Relative humidity is 10% ~ 85%

± In areas susceptible to excessive dust and dirt.

± Near any appliance generating a strong magnetic eld.

± In direct sunlight.

 Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be

(but not limited to):

± Unit has been dropped.

± Power supply cord or plug has been damaged.

± Liquid has been spilled on to the projector.

± Projector has been exposed to rain or moisture.

± Something has fallen in the projector or something is loose inside.

English

5

 Do not place the projector on an unstable surface. The projector may fall over resulting in injury or the

projector may become damaged.

 Do not block the light coming out of the projector lens when in operation. The light will heat the object

and could melt, cause burns or start a re.

 Please do not open or disassemble the projector as this may cause electric shock.

 Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous

voltages or other hazards. Please call Optoma before you send the unit for repair.

 See projector enclosure for safety related markings.

 The unit should only be repaired by appropriate service personnel.

 Only use attachments/accessories specied by the manufacturer.

 Do not look into straight into the projector lens during operation. The bright light may harm your eyes.

 When switching the projector o, please ensure the cooling cycle has been completed before

disconnecting power. Allow 90 seconds for the projector to cool down.

 Turn o and unplug the power plug from the AC outlet before cleaning the product.

 Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners,

waxes or solvents to clean the unit.

 Disconnect the power plug from AC outlet if the product is not being used for a long period of time.

 Do not setup the projector in places where it might be subjected to vibration or shock.

 Do not touch the lens with bare hands.

 Remove battery/batteries from remote control before storage. If the battery/batteries are left in the

remote for long periods, they may leak.

 Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it

can adversely aect the quality of the projector performance.

 Please follow the correct projector orientation installation as non standard installation may aect the

projector performance.

 Use a power strip and or surge protector. As power outages and brown-outs can KILL devices.

Cleaning the Lens

 Before cleaning the lens, be sure to turn o the projector and unplug the power cord to allow it to

completely cool down.

 Use a compressed air tank to remove the dust.

 Use a special cloth for cleaning lens and gently wipe the lens. Do not touch the lens with your ngers.

 Do not use alkaline/acid detergents or volatile solvents such as alcohol for cleaning lens. If the lens is

damaged due to the cleaning process, it is not covered by the warranty.

Warning

 Do not use a spray containing ammable gases to remove dust or dirt from the lens. This may cause a

re due to excessive heat inside the projector.

 Do not clean the lens if the projector is warming up as this may cause the lens’ surface lm to peel o.

 Do not wipe or tap the lens with a hard object.

English

6

Laser Radiation Safety Information

 Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as dened in

IEC 62471-5:Ed. 1.0. For more information, see Laser Notice No. 57, dated May 8, 2019

,(&(1&/$66/$6(5352'8&75,6.*5283

&RPSOLHVZLWK&)5DQGH[FHSWIRUFRQIRUPDQFHDVD5LVN

*

URXS/,3DVGHILQHGLQ,(&(G)RUPRUHLQIRUPDWLRQVHH/DVHU

1

RWLFH1RGDWHG0D\

,(&(1352'8,7/$6(5'(&/$66(*5283('(5,648(

&RQIRUPHDX[QRUPHV&)5HWjOH[FHSWLRQGHODFRQIRUPLWp

HQWDQWTXH/,3GXJURXSHGHULVTXHGpILQLHGDQVOD&(,(G3RXU

S

OXVGLQIRUPDWLRQVYRLUODYLVDXODVHUQGXPDL

,(&(1桅㾧ℰ䔉⒨5*⍘暑䬰䴁

晋ṭ,(&(GḔ⮁侐䙫5*/,3⍘暑䬰䴁Ọ⣽Ə奨䬍⏯&)5⑳

Ə㛛⤁䛟旃岮姱Ə媲⎪斘⹛㛯㗌䙫䬓噆㾧ℰ⅓␱˛

,(&(1䱢㾧ℰẎ⒨5*⍘晐䬰于

晋ṭ,(&(GḔ⮁Ḱ䙫5*/,3⍘晐䬰于Ọ⣽Ə奨䬍⏯&)5⑳

Ə㛛⤁䛟⅚ῈざƏ寞⎩旬⹛㛯㗌䙫䬓⏞㾧ℰ⅓␱˛

Failure to comply with the following could result in death or serious injury.

 This projector has built-in Class 4 laser module. Disassembly or modication is very dangerous and

should never be attempted.

 Any operation or adjustment not specically instructed by the user’s guide creates the risk of

hazardous laser radiation exposure.

 Do not open or disassemble the projector as this may cause damage by the exposure of laser

radiation.

 Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.

 When turning on the projector, make sure no one within projection range is looking at the lens.

 Without following the control, adjustment or operation procedure may cause damage by the exposure

of laser radiation.

 Adequate instructions for assembly, operation, and maintenance, including clear warnings concerning

precautions to avoid possible exposure to laser.



“WARNING: MOUNT ABOVE THE HEADS OF CHILDREN.”

Beejujpobmxbsojohbhbjotufzffyqptvsfgpsdmptffyqptvsftmfttuibo2n/

ȸBWFSUJTTFNFOU;JOTUBMMFSBV.EFTTVTEFMBUËUFEFTFOGBOUT/ȹ

Bwfsujttfnfoutvqqmênfoubjsfdpousfm(fyqptjujpopdvmbjsfqpvseftfyqptjujpot

ávofejtubodfefnpjotef2n/

ȸ ȹ

2n

Ƽ娤⌈濣⩇垛◦榖㑺‐䦣曫徦唓ƽ

悛⫋Pᶣ᳉序岛斠䗺䘙㉣墶䕂朋⟔娤⌈

IEC 60825-1:2014 Class 1 RG2

IEC 62471-5:2015 RG2

 Additional instructions to supervise children, no staring, and not use optical aids.

 Additional instructions to install above the reach of children.

 Notice is given to supervise children and to never allow them to stare into the projector beam at any distance

from the projector.

 Notice is given to use caution when using the remote control for starting the projector while in front of the

projection lens.

 Notice is given to the user to avoid the use of optical aids such as binoculars or telescopes inside the

beam.

 As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015.

 WARNING: MOUNT ABOVE THE HEADS OF CHILDREN. The use of a ceiling mount is recommended

with this product to place it above the eyes of children.

English

7

3D Safety Information

Please follow all warnings and precautions as recommended before you or your child use the 3D function.

Warning

Children and teenagers may be more susceptible to health issues associated with viewing in 3D and should be

closely supervised when viewing these images.

Photosensitive Seizure Warning and Other Health Risks

 Some viewers may experience an epileptic seizure or stroke when exposed to certain ashing images

or lights contained in certain Projector pictures or video games. If you suer from, or have a family

history of epilepsy or strokes, please consult with a medical specialist before using the 3D function.

 Even those without a personal or family history of epilepsy or stroke may have an undiagnosed

condition that can cause photosensitive epileptic seizures.

 Pregnant women, the elderly, suerers of serious medical conditions, those who are sleep deprived or

under the inuence of alcohol should avoid utilizing the unit’s 3D functionality.

 If you experience any of the following symptoms, stop viewing 3D pictures immediately and consult a

medical specialist: (1) altered vision; (2) light-headedness; (3) dizziness; (4) involuntary movements

such as eye or muscle twitching; (5) confusion; (6) nausea; (7) loss of awareness; (8) convulsions;

(9) cramps; and/ or (10) disorientation. Children and teenagers may be more likely than adults

to experience these symptoms. Parents should monitor their children and ask whether they are

experiencing these symptoms.

 Watching 3D projection may also cause motion sickness, perceptual after eects, disorientation, eye

strain and decreased postural stability. It is recommended that users take frequent breaks to lessen

the potential of these eects. If your eyes show signs of fatigue or dryness or if you have any of the

above symptoms, immediately discontinue use of this device and do not resume using it for at least

thirty minutes after the symptoms have subsided.

 Watching 3D projection while sitting too close to the screen for an extended period of time may

damage your eyesight. The ideal viewing distance should be at least three times the screen height. It

is recommended that the viewer’s eyes are level with the screen.

 Watching 3D projection while wearing 3D glasses for an extended period of time may cause a

headache or fatigue. If you experience a headache, fatigue or dizziness, stop viewing the 3D

projection and rest.

 Do not use the 3D glasses for any other purpose than for watching 3D projection.

 Wearing the 3D glasses for any other purpose (as general spectacles, sunglasses, protective goggles,

etc.) may be physically harmful to you and may weaken your eyesight.

 Viewing in 3D projection may cause disorientation for some viewers. Accordingly, DO NOT place your

3D PROJECTOR near open stairwells, cables, balconies, or other objects that can be tripped over, run

into, knocked down, broken or fallen over.

English

8

Copyright

This publication, including all photographs, illustrations and software, is protected under international copyright

without written consent of the author.

Disclaimer

The information in this document is subject to change without notice. The manufacturer makes no representations

or warranties with respect to the contents hereof and specically disclaims any implied warranties of

merchantability or tness for any particular purpose. The manufacturer reserves the right to revise this publication

and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any

person of such revision or changes.

Trademark Recognition

Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pending

applications in other countries throughout the world.

HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.

DLP

®

, DLP Link and the DLP logo are registered trademarks of Texas Instruments and BrilliantColor

TM

is a

trademark of Texas Instruments.

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its aliates.

All other product names used in this manual are the properties of their respective owners and are Acknowledged.

FCC

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15

of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does cause

harmful interference to radio or television reception, which can be determined by turning the device o and on is

encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the device and receiver.

 Connect the device into an outlet on a circuit dierent from that to which the receiver is connected.

 Consult the dealer or an experienced radio/television technician for help.

English

9

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC

regulations.

Caution

Changes or modications not expressly approved by the manufacturer could void the user’s authority, which is

granted by the Federal Communications Commission, to operate this projector.

Operation Conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference and

2. This device must accept any interference received, including interference that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

Remarque à l’intention des utilisateurs canadiens

Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.

Declaration of Conformity for EU countries

 EMC Directive 2014/30/EC (including amendments)

 Low Voltage Directive 2014/35/EC

 R & TTE Directive 1999/5/EC (if product has RF function)

WEEE

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure

utmost protection of the global environment, please recycle it.

English

10

INTRODUCTION

Package Overview

Carefully unpack and verify that you have the items listed below under standard accessories. Some of the items

under optional accessories may not be available depending on the model, specication and your region of

purchase. Please check with your place of purchase. Some accessories may vary from region to region.

The warranty card is only supplied in some specic regions. Please consult your dealer for detailed information.

Standard accessories

Projector Remote control

Documentation



Warranty Card(*

2

)



Quick Start User Manual

AC power cord

Note:

 The actual remote control may vary depending on the region.

 (*

1

) For remote control power charging.

 (*

2

) For European warranty Information, please visit www.optoma.com.

 (*

3

) Use the supplied Distance Cards to determine the proper distance of the projector from the

projection surface. For more details, see the SmartFIT Installation Guide.

Please scan the QR code or visit the following URL: https://www.optoma.com/support/download

Micro USB cable (*

1

)

Foot Spacer Distance Card (*

3

)

English

11

INTRODUCTION

Product Overview

6

10

2 3

7

8

9

1

16

5

4

Minimum

500mm

Minimum

500mm

Minimum

500mm

Note:

 Do not block projector intake and exhaust vents.

 When operating the projector in an enclosed space, allow at least 50cm (19”) clearance around the

intake and exhaust vents.

No Item No Item

1. Ventilation (outlet) 6. Input / Output

2. LED Indicators 7. Ventilation (inlet)

3. Power Button 8. Power Socket

4. Lens 9. Kensington™ Lock Port

5. Tilt-Adjustment Foot 10. IR Receiver

English

12

INTRODUCTION

Connections

1 3 5 7

2 4 6

89

1011

No Item No Item

1. USB 2.0 Port / USB Media Player 7. USB2.0 Port (Service Only)

2. HDMI 1 Port (HDMI v2.0 (ARC)) 8. Power Socket

3. HDMI 2 Port (HDMI v2.0) 9. Kensington

TM

Lock Port

4. S/PDIF Port (Digital Output) 10. HDMI 3 Port (HDMI 1.4)

5. RJ-45 Port 11. USB2.0 Port (Power 5V 1.5A)(*)

6. Audio Out Port

Note: (*) Not recommended for charging a cell phone.

Keypad and LED indicators

4

1

2 3

5

No Item No Item

1. Lamp LED 4. Power Button

2. Temp LED 5. Power LED

3. Bluetooth LED

English

13

INTRODUCTION

Remote control

8

9

7

1

2

4

3

5 6

10

11

No Item No Item

1. Power On / Standby 3. Return

2.

Four Directional Select Buttons:

Up

Left

Right

Down

4. Volume -

5. Speaker mode On

6. LED Indicator

7. Projector Menu / Quick Menu

8. OK

9. Home / Air Mouse Enable / Disable

10. Android App Settings / Focus

11. Volume +

Note: The remote control supports both infrared (IR) and Bluetooth transmissions. It can also operate as an air

mouse.

English

14

INTRODUCTION

Pairing your Bluetooth remote control with the projector

Long-press the “ ” and “ ” buttons at the same time for 5 seconds. The device is in pairing mode if the status

LED on the Bluetooth remote control is ashing blue.

5s

The pairing process will take approximately 20 seconds. If the pairing is successful, the status LED on the

Bluetooth remote control will turn solid blue when a button is pressed. Otherwise, the status LED on the Bluetooth

remote control will turn green when a button is pressed.

If the Bluetooth remote control is left idle for 10 minutes, it will automatically enter sleep mode and the Bluetooth is

disconnected.

Note:

 The actual remote control may vary depending on the region.

 Some buttons may have no function for models that do not support these features.

English

15

SETUP AND INSTALLATION

Installing the projector

Your projector is designed to be installed in one of two possible positions.

Your room layout or personal preference will dictate which installation location you select. Take into consideration

the size and position of your screen, the location of a suitable power outlet, as well as the location and distance

between the projector and the rest of your equipment.

Table mount front Table mount rear

 How to determine projector location for a given screen size, please refer to distance table on page 56.

 How to determine screen size for a given distance, please refer to distance table on page 56.

Note:

 The further away the projector is placed from the screen the projected image size increases and

vertical oset also increases proportionally.

 The vertical oset may vary between projectors, due to the limitations of optical manufacturing.

Additional adjustments may occur when switching projectors.

IMPORTANT!

Do not operate the projector in any orientation other than table top. The projector should be horizontal and

not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and may

shorten the lifetime of the projector itself. For none standard installation advise please contact Optoma.

English

16

SETUP AND INSTALLATION

Connecting sources to the projector

1

2

5

4

7

6

3

8

9

10

11

No Item No Item No Item

1. USB Flash Drive 5. USB Cable (Service only /

DDP FW upgrade)

9. Power Cord

2. HDMI Cable 6. Audio Out Cable 10. HDMI Dongle

3.

USB Flash Drive

7. RJ-45 Cable (for Internet) 11. USB Power Cable

4. HDMI Cable 8. S/PDIF Out Cable

Note: You can connect a USB mouse or keyboard to the USB port.

English

17

SETUP AND INSTALLATION

Adjusting the projector image

Image height

The projector is equipped with elevator feet for adjusting the image height.

1. Locate the adjustable foot you wish to adjust on the underside of the projector.

2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector.

Tilt-Adjustment Feet

Tilt-Adjustment Ring

Note: If you want to level the projector, rotate the adjustable feet and attach a foot spacer to both feet. Then

tighten the feet.

Foot Spacer

Tilt-Adjustment Ring

Foot Spacer

English

18

SETUP AND INSTALLATION

Remote setup

Charging the remote control

To charge the remote control, connect one end of the micro USB cable to the USB port on the bottom of the remote

control and the other end to a USB port of a device that supports charging. For example, to the USB 2.0 port on the

side of the projector.

CAUTION:

To ensure safe operation, please observe the following precautions:

 Avoid contact with water or liquid.

 Do not expose the remote control to moisture or heat.

 Do not drop the remote control.

Note:

 We recommend not to use the remote control while it is being charged.

 The remote control will automatically enter sleep mode after 10 minutes of inactivity.

 To wake the remote control, press on any of its buttons. Pressing the button only wakes the remote

control but does not perform the associated function. To perform the associated function, press the

button again.

About the air mouse

 To enable or disable air mouse, long press “ ”.

Note: The air mouse function is automatically disabled when the remote control is in sleep mode or

when you press the “Up”, “Down”, “Left”, or “Right” button.

 Charge the remote control when the battery power drops below 20% and the LED indicator starts

ashing red.

 While charging, the LED indicator will show a solid red light. When charging is completed, the LED

indicator will show a solid green light.

Note: The battery is fully charged in about 1.5h. The capacity of the battery is 250mAh (0.925Wh).

English

19

USING THE PROJECTOR

Powering on / o the projector

Powering on

1. Connect one end of the AC power cord to the power socket on the projector and the other end to the

electrical outlet. When connected, the power LED will turn red.

2. Turn on the projector by pressing the “ ” either on top of the projector or on the remote control.

or

During startup the power LED is ashing white and during normal operation, the power LED is solid

white.

Note: If the Power Mode (Standby) is set to “Eco” then the projector is powered on using the infrared signal from

the remote control. If the Power Mode (Standby) is set to “SmartHome” then the projector is powered on

using the Bluetooth signal from the remote control.

English

20

USING THE PROJECTOR

Eective range

Infra-Red (IR) remote control sensor is located on the front of the projector. Ensure to hold the remote control at

an angle within ±15° perpendicular to the projector’s IR remote control sensor to function correctly. The distance

between the remote control and the sensor should not be longer than 7 meters (~22 feet).

You can also operate the remote control by pointing it to the projected image.

Note: When pointing the remote control directly (0 degrees angle) on the IR sensor, the distance between the

remote control and the sensor should not be longer than 10 meters (~32 feet).

 Make sure that there are no obstacles between the remote control and the IR sensor on the projector

that might obstruct the infra-red beam.

 Make sure the IR transmitter of the remote control is not being shined by sunlight or uorescent lamps

directly.

 Please keep the remote controller away from uorescent lamps for over 2 meters or the remote

controller might become malfunction.

 If the remote control is close to Inverter-Type uorescent lamps, it might become ineective from time

to time.

 If the remote control and the projector are within a very short distance, the remote control might

become ineective.

 For Bluetooth pairing, after powering on the projector, make sure to aim the remote control to the area

marked with a red circle on the image below.

 If the standby Power Mode is set to “Eco”, after powering on the projector, make sure to aim the

remote control to the IR receiver directly.

Approx. ±15°

Page is loading ...

Optoma CinemaX P2 Owner's manual

This manual is also suitable for

Optoma CinemaX P2 Owner's manual

Related papers

Other documents