Electro-Voice ZLX-BRKT Installation guide

Type
Installation guide

Electro-Voice ZLX-BRKT wall mount bracket is designed for use with all ZLX Series loudspeakers, enabling safe and secure suspension of your speakers for a variety of applications. The bracket allows for both vertical and horizontal mounting orientations, providing flexibility in positioning your speakers for optimal sound dispersion. It features a U-bracket that attaches to the wall, and upper and lower mounts that attach to the speaker's handles.

Electro-Voice ZLX-BRKT wall mount bracket is designed for use with all ZLX Series loudspeakers, enabling safe and secure suspension of your speakers for a variety of applications. The bracket allows for both vertical and horizontal mounting orientations, providing flexibility in positioning your speakers for optimal sound dispersion. It features a U-bracket that attaches to the wall, and upper and lower mounts that attach to the speaker's handles.

ZLX Wall Mount Bracket
ZLX-BRKT
en | Installation Guide
Safety
!
Warning!
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of suspending objects
overhead. Electro-Voice strongly recommends that all loudspeakers be suspended taking into
account all current national, federal, state and local regulations. It is the responsibility of the
installer to ensure that all loudspeakers are safely installed in accordance with all such
regulations. When loudspeakers are suspended, Electro-Voice strongly recommends that the
system be inspected at least once a year. If any sign of weakness or damage is detected,
remedial action should be taken immediately. The user is responsible for making sure that the
wall or ceiling is capable of supporting the loudspeaker. Any hardware used to suspend a
loudspeaker that is not associated with Electro-Voice is the responsibility of others.
1
en 3
Electro-Voice Installation Guide 2013.05 | 01 | F01U285494
Installation
Installing ZLX Mounts
The ZLX Wall Mount Bracket is designed for use with all of the ZLX Series loudspeakers.
To attach the mounts to a ZLX Series loudspeaker, do the following:
1. Using a screwdreiver, remove the four (4) screws holding the top handle to the chassis
(see Figure 2.1).
Keep these screws to assemble the upper mount.
Top Handle
Bottom Handle
Figure 2.1: Remove Handles
2. Remove the four (4) screws holding the bottom handle to the chassis (see Figure 2.1).
Keep these screws to assemble the lower mount.
3. Using the four (4) screws you removed from the top handle, attach the upper mount to a
12 inch ZLX loudspeaker where the top handle was located in the up position.
OR
Using the four (4) screws you removed from the top handle, attach the upper mount to a
15 inch ZLX loudspeaker where the top handle was located in the down position (see
Figure 2.2).
2
ZLX Wall Mount Bracket
2013.05 | 01 | F01U285494 Installation Guide Electro-Voice
Upper Mount
(up position)
Lower Mount
(up position)
ZLX-12P/ZLX-12
ZLX-15P/ZLX-15
Upper Mount
(down position)
Lower Mount
(up position)
Figure 2.2: Attach Mounts
4. Using the four (4) screws you removed from the bottom handle, attach the lower mount
to a ZLX loudspeaker where the bottom handle was located in the up position.
ZLX Wall Mount Bracket–Vertical Installation
To vertically wall mount a ZLX Series loudspeaker, do the following:
!
Caution!
Due to the weight of the loudspeaker system, it is imperative the bracket be properly secured
to the wall. The choice of fastener (not supplied) will be determined by the material and
construction of the mounting surface.
1. Using fasteners suitable for the wall material (not supplied), attach the U-bracket to the
wall.
2. Lift the loudspeaker and place the upper mount onto the pivot pin on top of the
U-bracket (see Figure 2.3).
en 5
Electro-Voice Installation Guide 2013.05 | 01 | F01U285494
ZLX-12P/ZLX-12
Pivot Pin
Pivot Pin
ZLX-15P/ZLX-15
Figure 2.3: Guide onto U-bracket
3. Ensuring the lower U-bracket pivot pin is securely placed in the notch, guide the lower
mount into position (see Figure 2.3).
The loudspeaker is loosely hung and allows you to position the loudspeaker.
4. Position the loudspeaker for the desired angle (see Figure 2.4).
15°
30°
45°
15°
30°
45°
0
Figure 2.4: Angle Degrees
5. Insert and tighten the two (2) screws (supplied) sufficiently so the loudspeaker does not
inadvertently rotate (see Figure 2.5).
ZLX Wall Mount Bracket
2013.05 | 01 | F01U285494 Installation Guide Electro-Voice
ZLX-15P/ZLX-15
ZLX-12P/ZLX-12
Figure 2.5: Secure Loudspeaker
en 7
Electro-Voice Installation Guide 2013.05 | 01 | F01U285494
ZLX Wall Mount Bracket–Horizontal Installation
To horizontally wall mount a ZLX Series loudspeaker, do the following:
!
Caution!
Due to the weight of the loudspeaker system, it is imperative the bracket be properly secured
to the wall. The choice of fastener (not supplied) will be determined by the material and
construction of the mounting surface.
1. Using fasteners suitable for the wall material (not supplied), attach the U-bracket to the
wall.
2. Lift and rotate the loudspeaker to a horizontal position where the side handle is on the
top.
3. Lift the loudspeaker and place the upper mount onto the pivot pin on the left side of the
U-bracket (see Figure 2.6).
ZLX-12P/ZLX-12
Pivot Pin
Pivot Pin
ZLX-15P/ZLX-15
Figure 2.6: Guide onto U-bracket—Horizontal
4. Ensuring the lower U-bracket pivot pin is securely placed in the notch, guide the lower
mount into position (see Figure 2.6).
The loudspeaker is loosely hung; rest the loudspeaker against the mounting surface.
5. Position the loudspeaker for the desired angle (see Figure 2.4).
6. Insert and tighten the two (2) screws (supplied) sufficiently so that the loudspeaker does
not inadvertently rotate.
ZLX Wall Mount Bracket
2013.05 | 01 | F01U285494 Installation Guide Electro-Voice
ZLX-12P/ZLX-12 ZLX-15P/ZLX-15
Figure 2.7: Secure Loudspeaker—Horizontal
Horizontal Wall Mount ZLX Series Loudspeaker with High Frequency on the Left
The horizontal wall mount setup is used when a left/rigth stereo configuration is needed.
To horizontally wall mount a ZLX Series loudspeaker with High Frequency on the left, do
the following:
!
Caution!
Due to the weight of the loudspeaker system, it is imperative the bracket be properly secured
to the wall. The choice of fastener (not supplied) will be determined by the material and
construction of the mounting surface.
1. Using fasteners suitable for the wall material (not supplied), attach the U-bracket to the
wall.
2. Install the the upper and lower mounts onto the opposite handles (see Installing ZLX
Mounts).
Note: The upper mount is attached to where the lower handle was located and the lower
mount is attached to where the upper handle was located (see Figure 2.8).
en 9
Electro-Voice Installation Guide 2013.05 | 01 | F01U285494
Lower Mount
HF Right
HF Left
Figure 2.8: ZLX HF on the Left—Horizontal
3. Lift and rotate the loudspeaker to a horizontal position where the side handle is on the
bottom.
4. Lift the loudspeaker and place the lower mount (positioned on the left side) onto the
pivot pin on left side of the U-bracket (see Figure 2.6).
5. Ensuring the lower U-bracket pivot pin is securely placed in the notch, guide the upper
mount (positioned on the right side) into position.
The loudspeaker is loosely hung; rest the loudspeaker against the mounting surface.
6. Position the loudspeaker for the desired angle (see Figure 2.4).
7. Insert and tighten the two (2) screws (supplied) sufficiently so the loudspeaker does not
inadvertently rotate (see Figure 2.7).
ZLX Wall Mount Bracket
2013.05 | 01 | F01U285494 Installation Guide Electro-Voice
Technical data
Dimensions (H x W x D): 475 mm x 108 mm x 107 mm (18.70 in x 4.25 in x 3.03 in)
Shipping Dimensions: 505 mm x 130 mm x 100 mm (19.88 in x 5.12 in x 3.94 in )
Net Weight: 1.70 kg (3.75 lb)
Shipping Weight: 1.90 kg (4.19 lb)
Table 3.1: Specifications
Quantity Description
1 U-bracket
1 Upper mount
1 Lower mount
2 Screws
Table 3.2: Components
3
en 11
Electro-Voice Installation Guide 2013.05 | 01 | F01U285494
Bosch Security Systems, Inc
12000 Portland Avenue South
Burnsville MN 55337
USA
www.electrovoice.com
© Bosch Security Systems, Inc, 2013
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Electro-Voice ZLX-BRKT Installation guide

Type
Installation guide

Electro-Voice ZLX-BRKT wall mount bracket is designed for use with all ZLX Series loudspeakers, enabling safe and secure suspension of your speakers for a variety of applications. The bracket allows for both vertical and horizontal mounting orientations, providing flexibility in positioning your speakers for optimal sound dispersion. It features a U-bracket that attaches to the wall, and upper and lower mounts that attach to the speaker's handles.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI