Kohler 5016-ET-0 User manual

Brand: Kohler

Model: 5016-ET-0

Type: User manual

Product Information

Applicable product:

3/4″ top spud urinal K-5016-ET

Fixture:

Conﬁguration 3/4″ top spud

Spud inlet size 3/4″

Water per ﬂush 0.5 gpf (1.9 lpf) or 1.0 gpf (3.8 lpf)

Included components:

3/4″ inlet spud 18376

2″ outlet spud 18766

Hanger (2 required) 64512

Recommended accessories:

WAVE exposed washout urinal ﬂushometer –

0.5 gpf (1.9 lpf)

K-10675

Touchless DC washout urinal ﬂushometer –

0.5 gpf (1.9 lpf)

K-10958

Touchless DC siphon jet urinal ﬂushometer –

1.0 gpf (3.8 lpf)

K-10961

Manual siphon jet urinal ﬂushometer –

1.0 gpf (3.8 lpf)

K-13521

Installation Notes

Install this product according to the installation guide.

Refer to manufacturer’s instructions and local codes for

ﬂushometer requirements.

Will comply with ADA when installed per Section 605 Urinals

of the Act.

Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All

dimensions are nominal.

Outlet Detail

2" NPT Tap

3/4" Spud

32" (813 mm)

To Floor for

Regular Installation

6-1/2"

(165 mm)

13-1/2"

(343 mm)

1/4"

(6 mm)

(152 mm)

*24"

(610 mm)

20-3/8"

(518 mm)

11-3/8"

(289 mm)

14-1/2"

(368 mm)

2-3/8" (60 mm)

2" NPT Tap

17-1/2"

(445 mm)

**9-1/2"

(241 mm)

*Urinal complies with ADA requirement when rim

is mounted no higher than 17" (432 mm) from finished floor.

**Outlet height for ADA compliance.

Roughing-In

K-5016-ET

DEXTER

URINAL

DEXTERTM URINAL

116345-1-

Kohler 5016-ET-0 User manual

Kohler 5016-ET-0 User manual

Kohler 5016-ET-0 User manual

Related papers

Other documents