Kohler 5016-ET-0 Dimensions Guide

Kohler
Brand
Kohler
Model
5016-ET-0
Type
Dimensions Guide
Features
•
Vitreous china
•
Siphon jet
•
3/4″ top spud
•
Includes inlet and outlet spuds and hangers
•
Includes anti-backsplash wall
•
14-1/2″ (368 mm) extended rim
•
0.5 gpf (1.9 lpf) or 1.0 gpf (3.8 lpf)
•
WaterSense
®
compliant when used with WaterSense
flushometer
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ADA
•
ICC/ANSI A117.1
•
ASME A112.19.2/CSA B45.1
•
EPA WaterSense
®
URINAL
K-5016-ET
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Accessories
•
CP: Polished Chrome
Specified Model
Model Description Colors/Finishes
K-5016-ET 3/4″ top spud urinal ❑ 0 ❑ Other_____
Recommended Accessories
K-10675 WAVE exposed washout urinal flushometer – 0.5 gpf (1.9 lpf) ❑ CP
K-10958 Touchless DC washout urinal flushometer – 0.5 gpf (1.9 lpf) ❑ CP
K-10961 Touchless DC siphon jet urinal flushometer – 1.0 gpf (3.8 lpf) ❑ CP
K-13521 Manual siphon jet urinal flushometer – 1.0 gpf (3.8 lpf) ❑ CP
Product Specification
The siphon jet urinal shall be made of vitreous china with a 3/4″ top spud. Urinal shall include inlet and outlet spuds and hangers.
Urinal shall include anti-backsplash wall. Urinal shall use 0.5 gpf (1.9 lpf) or 1.0 gpf (3.8 lpf). Urinal shall be WaterSense
compliant when used with WaterSense flushometer. Urinal shall have a 14-1/2″ (368 mm) extended rim. Urinal shall be Kohler
Model K-5016-ET-_______.
DEXTERTM
Page 1 of 2
116345-4-
AJ
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Technical Information
Fixture:
Configuration 3/4″ top spud
Spud inlet size 3/4″
Water per flush 0.5 gpf (1.9 lpf) or 1.0 gpf (3.8 lpf)
Included components:
3/4″ inlet spud 18376
2″ outlet spud 18766
Hanger (2 required) 64512
Installation Notes
Install this product according to the installation guide.
Refer to manufacturer’s instructions and local codes for
flushometer requirements.
Will comply with ADA when installed per Section 605 Urinals
of the Act.
Outlet Detail
2" NPT Tap
3/4" Spud
32" (813 mm)
To Floor for
Regular Installation
6-1/2"
(165 mm)
13-1/2"
(343 mm)
1/4"
(6 mm)
6"
(152 mm)
*24"
(610 mm)
20-3/8"
(518 mm)
11-3/8"
(289 mm)
14-1/2"
(368 mm)
2-3/8" (60 mm)
2" NPT Tap
17-1/2"
(445 mm)
**9-1/2"
(241 mm)
*Urinal complies with ADA requirement when rim
is mounted no higher than 17" (432 mm) from finished floor.
**Outlet height for ADA compliance.
Product Diagram
DEXTERTM
DEXTERTM URINAL
Page2of2
116345-4-
AJ
  • Page 1 1
  • Page 2 2

Kohler 5016-ET-0 Dimensions Guide

Kohler
Brand
Kohler
Model
5016-ET-0
Type
Dimensions Guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents