AVLink YH-01 User manual

Category
Video switches
Type
User manual
YPbPr to HDMI
Conversion Box
(YH-01)
USER MANUAL V1.0
YH-01
Package Contents-
1 YH-01
1 user manual
1 power adapter DC 5V
1 1.2m component (Video) Cable
1 1.2m Audio R/L Cable
Any thing missed, please contact with your vendor.
Introduction
The YH-01 Component Video (YPbPr) to HDMI
Converter transforms HD component video (YPbPr) and
Audio (R/L) signal to HDMI output. The converter
changes your input analog signal to digital graphic
signal, so that digital display device or projector can be
connected to your analog output easily and conveniently
by HDMI.
Features
Use PanelLink digital technology.
Compliant with the specification of HDMI 1.3.
Support 480i, 480p, 576i, 576p, 720p, 1080i, 1080p.
Support Audio Sample rate 96KHz.
Specifications
Function YH-01
Video Input Connector
(Female)
1 Set RCA(YPbPr)
Audio Input Connector
(Female)
1 Set RCA(R/L)
Video Output Connector
(HDMI Female)
1
Max. Resolution 1080p
Cable Distance
(Single end)
10 m (Max.)
Input Signal Type Standard YPbPr Signal
Output Signal Type Standard HDMI Signal
Power Adapter (Min.) DC 5V
Housing Plastic
Weight 130g
Dimensions (LxWxH) 95*91*31mm
Note:
Different cable qualify might effect upon the maximum
resolution and cable distance.
-1-
Technical Specifications
Input/Output Signal
Pin # Signal Pin # Signal
1
TMDS Data 2+
11
TMDS Clock Shield
2
TMDS Data 2 Shield
12
TMDS Clock -
3
TMDS Data 2-
13
CEC
4
TMDS Data 1+
14
Reserved
(N.C. on device)
5
TMDS Data 1 Shield
15
SCL
6
TMDS Data 1-
16
SDA
7
TMDS Data 0+
17
DDC/CEC Ground
8
TMDS Data 0 Shield
18
+5 Power
9
TMDS Data 0-
19
Hot Plug Detect
10
TMDS Clock+
FRONT VIEW
1. “YPbPr In” Port
2. “Audio In” Port
-2-
REAR VIEW
1. Vertical position adjust
Adjust switch when screen position is right or left
slant.
2. Horizontal position adjust
Adjust switch when screen position is lower or upper.
3. Sharpness adjust
Adjust switch “SHARP” To correct flickering text or
line.
4. “HDMI Out” Port
5. Input Power Jack
TOP VIEW
1. Power LED
-3-
Installation
1. Connect the YH-01 video/audio input RCA connector
with RCA Video/audio male to male cable from different
audio/video equipment.
2. Connect the HDMI Female extension cable between the
monitor and the “HDMI Out” port of YH-01.
3. Connect the power cord and turn on the YH-01.
4. Turn on the DVD and digital monitor or projector.
Support VGA mode
Analog Resolution Frequency(Hz)
480i(NTSC) 1440x480 59
480p 720x480 59
576i(PAL) 1440x576 50
576p 720x576 50
720p 1280x720 50 / 60
1080i 1920x1080 50 / 60
1080p 1920x1080 50/ 60
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-4-
  • Page 1 1
  • Page 2 2

AVLink YH-01 User manual

Category
Video switches
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI