Noble House 300834 Installation guide

Type
Installation guide

Noble House 300834

The Noble House 300834 is a stylish and functional table that is perfect for any home. With its sturdy construction and easy assembly, this table is built to last. The table top is made of high-quality materials that are resistant to scratches and stains, making it ideal for everyday use. The legs are made of durable metal that can support heavy weights, ensuring that your table will remain stable even when fully loaded.

This table is also incredibly easy to assemble. With just a few simple steps, you can have your table up and running in no time. The included instructions are clear and concise, making assembly a breeze.

Noble House 300834

The Noble House 300834 is a stylish and functional table that is perfect for any home. With its sturdy construction and easy assembly, this table is built to last. The table top is made of high-quality materials that are resistant to scratches and stains, making it ideal for everyday use. The legs are made of durable metal that can support heavy weights, ensuring that your table will remain stable even when fully loaded.

This table is also incredibly easy to assemble. With just a few simple steps, you can have your table up and running in no time. The included instructions are clear and concise, making assembly a breeze.

Label Picture Description QTY
A Table Top 1
B Leg 4
Label Picture Description QTY
Washer 17
Bolt (M6*15) 17
Allen Key 1
Caution : You must read this before you proceed
Table
Before
Beginning
Assembly:
*17
*17
Page 1 OF 4
Step 1
Overview
This Table has multiple parts and may require up to 30 minutes to assemble. To give
you an overview of the Table parts, the above picture is to help you put the various parts
into perspective. Please read through the instructions below to familiarise yourself with
the parts and steps before assembly.
Open the carton and place all the parts onto a clean, non-marring surface.
Place the Table Top(A) facedown onto the clean, non-marring surface.
Align the Legs(B) to Table Top(A) as shown in the picture.
Note: The point of the Legs corners should match with the Table Edges
Note: The point of the
Legs corners should
match with the Table
Edges
Note: The point of the
Legs corners should
match with the Table
Edges
Table Top(A)
Leg(B)
FRONT FACING
Page 2 OF 4
Step 2
Step 3
Step 4
Place the Table on a LEVEL SURFACE to check for wobbles.
If it wobbles, apply even steady pressure down on the Table.
This action should help align all parts.
Then proceed to tighten all Bolts at all joints
Do NOT fully tighten a Bolt in one go and then move on to the next one.
Rather, in a sequential manner, gradually tighten each Bolt until all Bolts are
evenly secured.
This methodology will ensure maximum evenness once all Bolts are fully
tightened.
Attach Leg(B) to Table Top(A) using Bolts() and Washers() with Allen Key() as
shown above.
Repeat the same process to install the remaining three Legs(B).
Do not fully tighten the Bolts.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Page 3 OF 4
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the
product and /or place under patio or awnings.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Children should not climb or jump on the furniture.
Keep away from sources of ignition.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Noble House 300834 Installation guide

Type
Installation guide

Noble House 300834

The Noble House 300834 is a stylish and functional table that is perfect for any home. With its sturdy construction and easy assembly, this table is built to last. The table top is made of high-quality materials that are resistant to scratches and stains, making it ideal for everyday use. The legs are made of durable metal that can support heavy weights, ensuring that your table will remain stable even when fully loaded.

This table is also incredibly easy to assemble. With just a few simple steps, you can have your table up and running in no time. The included instructions are clear and concise, making assembly a breeze.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI