KitchenAid KSMPEXTA User guide

Page is loading ...

2 | PARTS AND FEATURES

PARTS AND FEATURES

PARTS AND ACCESSORIES

Spaghetti

Housing

Auger

Dough pusher/

combo tool

Cleaning tool

PASTA PLATES

Bucatini

Rigatoni

Fusilli

Large macaroni

Small macaroni

Cutter

Pasta ring

W10818897C_EN_v02.indd 2 2/29/16 10:46 AM

ENGLISH

PASTA PRESS SAFETY | 3

PASTA PRESS SAFETY

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always

be followed, including the following:

1. Read all instructions.

2. To avoid risk of electrical shock, do not put Stand Mixer in water or other liquid.

3. Close supervision is necessary when any appliance is used by or near children.

4. Unplug the Stand Mixer from outlet when not in use, before putting on or taking

off parts, and before cleaning.

5. Avoid contacting moving parts. Keep ngers out of feed and discharge openings.

6. Do not feed dough by hand. Always use the combo tool to push food.

7. Do not operate the Stand Mixer with a damaged cord or plug or after the

Stand Mixer malfunctions, or is dropped or damaged in any manner. Return

the Stand Mixer to the nearest Authorized Service Center for examination,

repair or electrical or mechanical adjustment.

8. The use of accessories not recommended or sold by KitchenAid may cause

re, electric shock or injury.

9. Do not use the Stand Mixer outdoors.

W10818897C_EN_v02.indd 3 2/29/16 10:46 AM

4 | USING THE PASTA PRESS

PASTA PRESS SAFETY

10. Do not let the cord hang over the edge of table or counter.

11. Do not let the cord contact hot surfaces, including the stove.

12. Also see Important Safeguards included in the Stand Mixer

“Instructions” manual.

USING THE PASTA PRESS

FOR DETAILED INFORMATION ON USING THE PASTA PRESS:

Visit kitchenaid.com/quickstart for additional instructions with videos, inspiring recipes,

and tips on how to use your Pasta Press.

CHOOSING THE RIGHT PASTA PLATE

PASTA PLATE

RECOMMENDED

STAND MIXER SPEED

RECOMMENDED

EXTRUSION LENGTH

SPAGHETTI

10

Approximately 9½" (24.0 cm)

BUCATINI

10

Approximately 9½" (24.0 cm)

RIGATONI

6

Approximately 1½" (4.0 cm)

FUSILLI

3

Approximately 1½” (4.0 cm)

LARGE

MACARONI

6

Up to 2" (5.0 cm)

SMALL

MACARONI

6

Up to 1½" (4.0 cm)

SAVE THESE INSTRUCTIONS

This product is designed for household use only.

W10818897C_EN_v02.indd 4 2/29/16 10:46 AM

ENGLISH

USING THE PASTA PRESS | 5

3

Screw pasta ring onto housing base

until it is seated firmly in place.

1

Rotate cutter away from the housing

base so that the auger may be

inserted. Insert auger into housing

base, cross-tab first. Auger should

settle completely inside of housing.

2

Place selected pasta plate onto

housing base so that the pasta

plate’s tab inserts into auger base.

USING THE PASTA PRESS

ASSEMBLING THE PASTA PRESS

W10818897C_EN_v02.indd 5 2/29/16 10:46 AM

6 | USING THE PASTA PRESS

USING THE PASTA PRESS

ATTACHING THE PASTA PRESS

3

Insert attachment shaft housing into

the attachment hub, making certain

the power shaft fits into the square

hub socket. If necessary, rotate the

Pasta Press back and forth. The pin

on the attachment housing fits into

the notch of the hub rim when in

the proper position.

4

Tighten the Stand Mixer attachment

hub knob until the Pasta Press

attachment is completely secured

to the Stand Mixer.

2

For Stand Mixers with a hinged attachment hub cover: Flip up to open.

For Stand Mixers with a removable attachment hub cover: Turn the attachment

knob counterclockwise to remove attachment hub cover.

1

Turn Stand Mixer OFF and unplug.

W10818897C_EN_v02.indd 6 2/29/16 10:46 AM

ENGLISH

USING THE PASTA PRESS | 7

1

Prepare pasta dough (see “Recipe”

section). Form dough into walnut-

sized balls.

0 Stir 2 4 8 10

2

Set the Stand Mixer speed, using

“Choosing the right pasta plate”

chart.

USING THE PASTA PRESS

MAKING PASTA

IMPORTANT: When using the Pasta Press, do not wear ties, scarves, loose clothing

or long necklaces; gather long hair with a clasp.

NOTE: The Pasta Press is designed to

be used with pasta dough only. To avoid

damaging your Pasta Press, do not insert

anything other than pasta dough.

W10818897C_EN_v02.indd 7 2/29/16 10:46 AM

8 | USING THE PASTA PRESS

FOR DETAILED INFORMATION ON USING THE PASTA PRESS:

Visit kitchenaid.com/quickstart for additional instructions with videos, inspiring recipes,

and tips on how to use your Pasta Press.

USING THE PASTA PRESS

3

Slowly feed walnut-sized balls

of dough into the hopper; dough

should self-feed through the auger.

Wait until auger is visible before

adding the next piece.

4

Use the combo tool to push dough

only if dough becomes caught in

the hopper and no longer self feeds.

5

Use the cutter to cut pasta at

desired length as it exits the press.

See “Choosing the right pasta plate”

for recommended lengths.

6

Separate pasta after extrusion. Pasta

may be cooked immediately. If

drying, place long noodles on

KitchenAid

®

Drying Rack (KPDR),

or dry in a single layer on a towel

placed on a at surface.

WARNING

Food Poisoning Hazard

Do not let foods that contain

perishable ingredients such as

eggs, dairy products, and

meats remain unrefrigerated for

more than one hour.

Doing so can result in food

poisoning or sickness.

W10818897C_EN_v02.indd 8 2/29/16 10:46 AM

ENGLISH

USING THE PASTA PRESS | 9

USING THE PASTA PRESS

OPTIONAL: If desired, attach the next

pasta plate, using the directions in the

“Attaching the Pasta Press” section.

NOTE: Allow Stand Mixer to rest for at

least 1 hour after extruding 2 consecutive

pasta dough recipes.

IMPORTANT: After removing the auger

from the press housing, be sure to clean

any dried dough from the auger. See

“Care and Cleaning” for details.

3

Unscrew the pasta ring to remove.

If pasta ring is too tight to remove

by hand, slip the wrench side of the

combo tool over the grooves, and

turn as shown. Once the pasta ring

is off, pop out the pasta plate.

4

Use the combo tool hook to pull

the auger from the Pasta Press

housing.

DISASSEMBLING THE PASTA PRESS

1

Turn Stand Mixer OFF and unplug.

2

Remove the Pasta Press attachment

from the Stand Mixer.

W10818897C_EN_v02.indd 9 2/29/16 10:46 AM

10 | CARE AND CLEANING

1

Turn Stand Mixer OFF and unplug.

2

Completely disassemble Pasta

Press. Use the directions from the

“Disassembling the Pasta Press”

section.

CARE AND CLEANING

CLEANING THE PASTA ATTACHMENT AND ACCESSORIES

These accessories are designed to be used with pasta dough only. To avoid damaging

your Pasta Press, do not insert anything other than pasta dough.

IMPORTANT: Do not use metal objects, other than the provided cleaning tool,

to clean out the Pasta Press. Do not wash housing, cutter, and pasta plates in the

dishwasher or immerse in water or other liquids. The housing, cutter, and pasta plates

should be hand washed.

3

Remove completely dried dough

with the cleaning tool.

4

Clean the Pasta Press housing,

cutter, and pasta plates by hand

only. Wash with a soft, damp cloth.

Dry thoroughly with a soft dry

cloth. Do not immerse in water or

other liquids. Do not wash in the

dishwasher.

W10818897C_EN_v02.indd 10 2/29/16 10:46 AM

ENGLISH

CARE AND CLEANING | 11

FOR DETAILED INFORMATION ON CLEANING THE PASTA PRESS:

Visit kitchenaid.com/quickstart for additional instructions with videos, inspiring recipes,

and tips on how to use your Pasta Press.

CARE AND CLEANING

5

Wash the pasta ring, auger and

combo tool by hand with a soft

cloth, in warm sudsy water; or wash

in the top rack of the dishwasher.

W10818897C_EN_v02.indd 11 2/29/16 10:46 AM

12 | RECIPE

RECIPE

COOKING PASTA

Add 2 tsp (10 mL) salt and 1 tbs. (15 mL)

oil (optional) to 6 qt (5.7 L) boiling water.

Gradually add pasta and continue to cook

at a boil until pasta is “al dente” or slightly

rm to the bite. Pasta oats to the top of

the water while cooking, so stir occasionally

to keep it cooking evenly. Use a colander

to drain.

Dry Pasta — 7 minutes

Fresh Pasta — 2-5 minutes, depending

on noodle thickness.

BASIC EGG NOODLE PASTA

4 large eggs

3½ cups (830 mL) sifted all-purpose our

1 tbs (15 mL) water

1 tsp (2 mL) salt

Break eggs into a glass measuring cup.

Check to see that the eggs measure

7/8 cup (207 mL). If less than 7/8 cup

(207 mL), add water, 1 tsp (2 mL) at a

time, until measurement is reached.

Place our and salt in Stand Mixer bowl.

Attach bowl and at beater. Turn to Speed

2 and gradually add eggs and 1 tbs (15 mL)

water. Mix for 30 seconds. Stop the Stand

Mixer and exchange the at beater for the

dough hook. Turn to Speed 2 and knead

for 2 minutes.

Let dough rest for 20 minutes

Remove mixture from bowl and place on

a clean surface.

Dough may appear crumbly. Hand knead

for 30 seconds to 1 minute or until dough

is smooth, pliable and holds together in

a ball.

Form walnut-sized pieces and extrude

pasta into desired shape. Separate and

dry as desired, following cooking

instructions above.

Yield: About 1 ¼ pounds (579 g) dough

WARNING

Food Poisoning Hazard

Do not let foods that contain

perishable ingredients such as

eggs, dairy products, and

meats remain unrefrigerated for

more than one hour.

Doing so can result in food

poisoning or sickness.

FOR MORE RECIPES WITH THE PASTA PRESS:

Visit kitchenaid.com/quickstart for additional instructions with videos, inspiring recipes,

and tips on how to use your Pasta Press.

W10818897C_EN_v02.indd 12 2/29/16 10:46 AM

ENGLISH

TROUBLESHOOTING | 13

TROUBLESHOOTING

If your Stand Mixer should malfunction or

fail to operate while using the Pasta Press

attachment, please check the following:

1. Did you use the correct speed for

the pasta plate as suggested in the

“Choosing the right pasta plate” chart?

2. Did you assemble and attach the Pasta

Press attachment properly as shown in

the “Using the Pasta Press” section?

3. Did you follow the usage instructions

as described in the “Using the Pasta

Press” section?

4. Is your dough prepared according to

the recipe?

5. Is the Stand Mixer plugged in?

6. Is the fuse in the circuit to the Stand

Mixer in working order? If you have a

circuit breaker box, be sure the circuit

is closed.

7. Turn off the Stand Mixer for 10-15

seconds, then turn it back on. If the

Stand Mixer still does not start, allow

it to cool for 30 minutes before turning

it back on.

If the problem is not due to one of the

above items, see the “Arranging for

Service” section in the “Warranty”.

Do not return the Pasta Press attachment

or the Stand Mixer to the retailer, as they

do not provide service.

W10818897C_EN_v02.indd 13 2/29/16 10:46 AM

14 | WARRANTY AND SERVICE

WARRANTY AND SERVICE

KITCHENAID

®

PASTA PRESS WARRANTY FOR

THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA,

PUERTO RICO, AND CANADA

This warranty extends to the purchaser and any succeeding owner for the Pasta Press

attachments operated in the 50 United States, the District of Columbia, Puerto Rico,

and Canada.

Length of Warranty: One Year Full Warranty from date of purchase.

KitchenAid Will Pay

for Your Choice of:

Hassle-Free Replacement of your Pasta Press. See

the next page for details on how to arrange for

service, or call the Customer eXperience Center

toll-free at 1-800-541-6390.

OR

The replacement parts and repair labor costs to correct

defects in materials and workmanship. Service must be

provided by an Authorized KitchenAid Service Center.

KitchenAid Will

Not Pay for:

A. Repairs when your Pasta Press is used in other

than normal single family home use.

B. Damage resulting from accident, alteration,

misuse or abuse.

C. Any shipping or handling costs to deliver your

Pasta Press to an Authorized Service Center.

D. Replacement parts or repair labor costs for

Pasta Press attachments operated outside the

50 United States, District of Columbia, Puerto

Rico, and Canada.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED

TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY

BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD

ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS

OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY

TO YOU.

IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S SOLE AND

EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE

TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA

DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES. This warranty gives you specic legal rights and you may also have other

rights which vary from state to state or province to province.

W10818897C_EN_v02.indd 14 2/29/16 10:46 AM

ENGLISH

WARRANTY AND SERVICE | 15

In the United States and Puerto Rico:

For service information, or to order

accessories or replacement parts, call

toll-free at 1-800-541-6390 or write to:

Customer eXperience Center,

KitchenAid Small Appliances,

P.O. Box 218, St. Joseph, MI 49085-0218

Outside the United States and

Puerto Rico:

Consult your local KitchenAid dealer or the

store where you purchased the Pasta Press

for information on how to obtain service.

For service information in Canada:

Call toll-free 1-800-807-6777.

For service information in Mexico:

Call toll-free 01-800-0022-767.

We’re so condent the quality of our

products meets the exacting standards

of KitchenAid that, if your Pasta Press

should fail within the rst year of

ownership, KitchenAid will arrange

to deliver an identical or comparable

replacement to your door free of charge

and arrange to have your original Pasta

Press returned to us. Your replacement

unit will also be covered by our one year

limited warranty.

If your Pasta Press should fail within the

rst year of ownership, simply call our

toll-free Customer eXperience Center at

1-800-541-6390 Monday through Friday.

Please have your original sales receipt

available when you call. Proof of purchase

will be required to initiate the claim. Give

the consultant your complete shipping

address. (No P.O. Box numbers, please.)

When you receive your replacement Pasta

Press, use the carton, packing materials,

and prepaid shipping label to pack up

your original Pasta Press and send it back

to KitchenAid.

We’re so condent the quality of our

products meets the exacting standards

of the KitchenAid brand that, if your

Pasta Press should fail within the rst

year of ownership, we will replace your

Pasta Press Attachment with an identical

or comparable replacement. Your

replacement unit will also be covered

by our one year limited warranty.

If your Pasta Press should fail within

the rst year of ownership, simply call

our toll-free Customer eXperience Center

at 1-800-807-6777 Monday through Friday.

Please have your original sales receipt

available when you call. Proof of purchase

will be required to initiate the claim. Give

the consultant your complete shipping

address.

When you receive your replacement Pasta

Press, use the carton, packing materials,

and prepaid shipping label to pack up

your original Pasta Press and send it back

to KitchenAid.

WARRANTY AND SERVICE

HASSLE-FREE REPLACEMENT WARRANTY – 50 UNITED STATES,

DISTRICT OF COLUMBIA, AND PUERTO RICO

HASSLE-FREE REPLACEMENT WARRANTY – CANADA

ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRES,

OR ORDERING ACCESSORIES AND REPLACEMENT PARTS

W10818897C_EN_v02.indd 15 2/29/16 10:46 AM

Page is loading ...

W10818897C

02/16

DISCOVER MORE. DÉCOUVREZ PLUS. DESCUBRA MÁS.

KITCHENAID.COM/QUICKSTART

is a trademark in the U.S. and elsewhere. Used under license in Canada.

est une marque de commerce aux É.-U. et ailleurs. Utilisé sous licence au Canada.

base es una marca registrada en EE.UU. y en otras partes. Usada en Canadá bajo licencia.

PRODUCT QUESTIONS OR RETURNS

QUESTIONS SUR LE PRODUIT OU LES RETOURS

PREGUNTAS SOBRE EL PRODUCTO O DEVOLUCIÓNES

USA: 1.800.541.6390 | KitchenAid.com

CANADA: 1.800.807.6777 | KitchenAid.ca

W10818897C_SP_v02.indd 48 2/29/16 10:47 AM

KitchenAid KSMPEXTA User guide

KitchenAid KSMPEXTA User guide

in other languages

Related papers

Other documents