A Cut Above Cutlery 3S-R User guide

Type
User guide
!
3 Stage Knife
Sharpener Tip Sheet
Thanks so much for purchasing our 3 Stage Knife Sharpener, we really
appreciate it! Here are some simple how-to tips to get you started
:
For Stainless Steel knives, use the slots marked “Coarse” and
“Fine” only. If your knife is on the dull side, start with the
“Coarse” slot.
Place the knife in the “Coarse” slot and draw it towards
you
2 or 3 times. Do not push it back and forth, only pull it
towards you.
Next , move your knife to the “Fine” slot and repeat the
process, pulling it towards you 2 or 2 times.
If needed, repeat the process with the “Fine” Slot until you
achieve the desired sharpness for your blade.
For Ceramic Knives, place your knife in the slot marked
“Ceramic”. Draw it towards you 2 or 3 times.
Repeat as needed until you reach the desired sharpness.
Finally, please do not use our sharpener for serrated knives
or scissors, as this could potentially damage them.
**IMPORTANT- ONLY PULL
THE KNIFE TOWARDS YOU-
DO NOT PUSH IT BACK AND
FORTH IN THE SLOT - this
could damage your knife. ***
**IMPORTANT- ONLY PULL
THE KNIFE TOWARDS YOU-
DO NOT PUSH IT BACK AND
FORTH IN THE SLOT - this
could damage your knife. ***
Please feel free to contact us with questions or just to say hello at
info@acutabovecutlery.com
We’d love to hear from you!
  • Page 1 1

A Cut Above Cutlery 3S-R User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI