Broadcom OneCommand Manager for VMware vCenter Version 10.0 User guide

Brand: Broadcom

Model: OneCommand Manager for VMware vCenter Version 10.0

Type: User guide

P009805-01A Rev. A Emulex Connects™ Servers, Storage and People

OneCommand

Manager

™

for

VMware vCenter

Version 10.0

User Manual

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

means or translated to any electronic medium without the prior written consent of Emulex.

Information furnished by Emulex is believed to be accurate and reliable. However, no responsibility is assumed by

Emulex for its use; or for any infringements of patents or other rights of third parties which may result from its use. No

license is granted by implication or otherwise under any patent, copyright or related rights of Emulex.

Emulex, the Emulex logo, AutoPilot Installer, AutoPilot Manager, BlockGuard, Connectivity Continuum,

Convergenomics, Emulex Connect, Emulex Secure, EZPilot, FibreSpy, HBAnyware, InSpeed, LightPulse, MultiPulse,

OneCommand, OneConnect, One Network. One Company., SBOD, SLI, and VEngine are trademarks of Emulex. All

other brand or product names referenced herein are trademarks or registered trademarks of their respective

companies or organizations.

Emulex provides this manual "as is" without any warranty of any kind, either expressed or implied, including but not

limited to the implied warranties of merchantability or fitness for a particular purpose. Emulex may make

improvements and changes to the product described in this manual at any time and without any notice. Emulex

assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties that may

result. Periodic changes are made to information contained herein; although these changes will be incorporated into

new editions of this manual, Emulex disclaims any undertaking to give notice of such changes.

Emulex, 3333 Susan Street

Costa Mesa, CA 92626

Note: References to OCe11100 series products also apply to OCe11100R series products.

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

Table of Contents

List of Figures .................................................................................... 12

List of Tables ..................................................................................... 16

1. Introduction ................................................................................... 17

Abbreviations ........................................................................................ 20

2. Installing and Uninstalling OCM for VMware vCenter Components................. 24

Best Installation Practices ......................................................................... 24

Requirements ........................................................................................ 24

Hardware..........................................................................................24

Software...........................................................................................24

Installing OCM for VMware vCenter.............................................................. 25

Verifying the OCM for VMware vCenter Installation ........................................28

Enabling and Disabling OCM for VMware vCenter............................................. 29

Registering and Unregistering OCM for VMware vCenter ................................... 31

Uninstalling OCM for VMware vCenter .......................................................... 32

Reinstalling OCM for VMware vCenter .......................................................... 32

3. Using OCM for VMware vCenter ........................................................... 34

Behavior of OCM for VMware vCenter Settings in the ESXi Server ........................ 34

Active Directory..................................................................................34

Privileges for OCM for VMware vCenter ......................................................34

Lockdown Mode Feature ........................................................................34

Accessing the vSphere Console ................................................................35

vSphere Console Views............................................................................. 35

Accessing OCM from the VMware Web Client.................................................. 37

Enabling the OCM for VMware vCenter in the Web Client .................................37

Enabling OCM for VMware for vCenter Server Appliance (vCSA) .........................38

Using OCM for VMware vCenter Web Client .................................................38

Launching OCM for VMware vCenter Web Client............................................39

4. Managing Clusters ............................................................................ 41

Viewing Information in a Cluster................................................................. 41

Viewing Host Information in a Cluster ........................................................41

Hosts Information Field Definitions ............................................................... 42

Viewing Adapter Information ..................................................................42

Adapters Information Field Definitions ........................................................... 43

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

Table of Contents

Viewing Port Information in a Cluster (Host-centric mode)...............................44

Host-centric Information Field Definitions....................................................... 45

Viewing Virtual Port Information in a Cluster (Host-centric mode)......................45

Virtual Port Information Field Definitions ....................................................... 46

Viewing Port Information in a Cluster (Fabric-centric mode).............................46

Fabric-centric Information Field Definitions..................................................... 48

5. Managing Hosts ............................................................................... 49

Viewing Information and Driver Parameters in a Host....................................... 49

Viewing Information for a Single Host .......................................................49

Host Information Field Definitions ................................................................ 49

Viewing Driver Parameters of All Adapters in a Host ......................................50

Host Driver Parameters Tab Field Definitions ................................................... 51

Setting Driver Parameters for All Adapters in a Host ......................................52

Viewing Firmware Information of All Adapters in a Host .................................52

Host Maintenance Tab Field Definitions.......................................................... 53

6. Managing Adapters and Ports .............................................................. 54

FC and FCoE Ports................................................................................... 54

Viewing FC Adapter Information ..............................................................54

FC Adapter Information Field Definitions ........................................................ 54

Viewing FC Port Details and Changing Link State ...........................................55

FC Port Details Tab Field Definitions ............................................................. 56

Viewing FCoE Port Details ......................................................................57

FCoE Port Details Field Definitions................................................................ 57

Viewing FC/FCoE Port Driver Parameters....................................................58

Driver Parameters Tab Field Definitions ......................................................... 59

Viewing FC/FCoE Port Statistics ..............................................................60

Port Statistics Tab Field Definitions .............................................................. 60

Viewing FC Port Transceiver Information ....................................................62

Transceiver Information Field Definitions ....................................................... 62

Viewing FC/FCoE Port Vital Product Data (VPD) ............................................63

VPD Table Definitions ............................................................................... 63

Viewing Maintenance Information and Firmware Versions for an FC/FCoE

Port ................................................................................................64

Maintenance Tab Field Definitions ................................................................ 65

Viewing FC/FCoE LUN Information ............................................................66

FC/FCoE LUN Information Field Definitions ..................................................... 67

Viewing PCI Registers for an FC Port .........................................................67

Viewing Flash Contents for an FC Port .......................................................68

Viewing PCI Registers for an FCoE Port.......................................................68

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

Table of Contents

Configuring FCoE Initialization Protocol (FIP) ...............................................69

FIP Tab Field Descriptions .......................................................................... 70

Configuring DCB Parameters for FCoE Adapter Ports ......................................71

DCB Tab Field Definitions........................................................................... 71

Configure DCB Parameters for FCoE Adapter Ports............................................. 73

Changing WWN Configuration for an FC Port ................................................74

Resetting an FC/FCoE Port .....................................................................76

Enabling and Disabling FC Ports ...............................................................77

Setting Driver Parameters for an FC/FCoE Port.............................................77

Saving Driver Parameters of an FC/FCoE Port to a File....................................78

Enabling/Disabling PFC Throttle on an FCoE Port ..........................................78

Configuring FIP Parameters for an FCoE Adapter ...........................................78

iSCSI Port............................................................................................. 79

Viewing iSCSI Port Information ................................................................79

iSCSI Port Info Tab Field Definitions .............................................................. 79

Enabling iSCSI Boot ..............................................................................80

Viewing PCI Registers for an iSCSI Port.......................................................81

Viewing iSCSI iSNS Server Information........................................................81

iSNS Tab Field Definitions .......................................................................... 82

Disabling the iSNS Server .......................................................................82

Changing the iSNS Server .......................................................................82

Viewing iSCSI Initiator Statistics...............................................................82

iSCSI Statistics Tab Field Definitions.............................................................. 83

Viewing iSCSI Initiator Login Options .........................................................84

iSCSI Initiator Login Options Tab Field Definitions.............................................. 86

Initiator Default Login Options Window Field Definitions ..................................... 87

Viewing iSCSI Target Discovery Information .................................................88

iSCSI Target Discovery Tab Field Definitions .................................................... 88

Viewing iSCSI Target Information .............................................................88

iSCSI Target Information Tab Field Definitions.................................................. 89

Viewing Target Session Information ..........................................................89

Target Sessions Window Field Definitions........................................................ 90

Configuring iSNS for iSCSI Target Discovery .................................................92

Viewing iSCSI LUN Information.................................................................92

iSCSI LUN Info Tab Field Definitions .............................................................. 93

Viewing iSCSI Port Vital Product Data (VPD).................................................93

VPD Table Definitions ............................................................................... 93

Configuring DCB Parameters for iSCSI Adapter Ports.......................................94

DCB Tab Field Definitions........................................................................... 94

Configure DCB Dialog Box Field Definitions...................................................... 97

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

Table of Contents

NIC Port ............................................................................................... 99

Viewing NIC Port Information ..................................................................99

NIC Port Information Tab Field Definitions .................................................... 100

Enabling and Disabling VEPA (Virtual Ethernet Port Aggregator)........................... 101

Viewing PCI Registers for a NIC Port ........................................................ 102

Viewing NIC Port Vital Product Data (VPD) ................................................ 103

VPD Table Definitions ............................................................................. 104

Using SR-IOV on NIC Ports .................................................................... 104

Enabling or Disabling SR-IOV ..................................................................... 104

Displaying Virtual Functions on a Host Operating System ................................... 105

Port Information Field Definitions for the Virtual Function ................................. 106

OCe1010x-Series and OCe1110x-Series Adapters ...........................................106

Viewing OCe10100–Series and OCe11100–Series Adapter Information ................. 106

Adapter Information Tab Field Definitions..................................................... 107

Viewing and Installing Licenses .............................................................. 109

Viewing Available Licenses ....................................................................... 109

Installing Licenses ................................................................................. 110

Changing Personalities on OCe1010x-Series and OCe1110x-Series Adapters ......... 111

Managing Port Channels Using Channel Management .................................... 112

Enabling and Disabling Channel Management ................................................. 112

Configuring Channel Management for OCe1110x-series Adapters ...................... 113

Channel Mgmt Field Definitions ................................................................. 114

Disabling a Specific Channel ..................................................................... 114

LPVID Assignment for a Specific Channel ...................................................... 114

Bandwidth Assignments for a Specific Channel ............................................... 114

Viewing the Channel Management Tab for vNIC1 ......................................... 115

Channel Mgmt Field Definitions for vNIC1 ..................................................... 115

Viewing the Channel Management Tab for UFP ........................................... 116

Channel Mgmt Field Definitions for UFP........................................................ 116

Viewing OCe1010x–Series and OCe1110x–Series Adapter Firmware Information..... 117

Maintenance Tab Field Definitions .............................................................. 117

Viewing and Configuring Physical Ports for OCe1010x–Series and

OCe1110x–Series Adapters.................................................................... 118

Viewing Physical Ports ............................................................................ 118

Physical Port Info Tab Field Definitions ........................................................ 118

Configuring a Physical Port for OCe1010x-Series and OCe1110x-Series Adapters ....... 119

Change Port Speed Field Definitions............................................................ 119

Viewing Physical Data for OneConnect 10GBaseT Series Adapters......................... 120

PHY Data Tab Field Definitions .................................................................. 121

Viewing Port Transceiver Information for OCe1010x–Series and OCe1110x–Series

Adapters............................................................................................. 122

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

Table of Contents

Transceiver Information Field Definitions ..................................................... 122

Viewing and Configuring OCe1010x–Series and OCe1110x–Series Physical Port

DCB Parameters ................................................................................ 123

Viewing Physical Port DCB Parameters ......................................................... 123

DCB Tab Field Definitions......................................................................... 124

Configuring Physical Port DCB Parameters..................................................... 125

Configure DCB Dialog Box Field Definitions.................................................... 126

OCe14000-Series Adapters .......................................................................129

Viewing OCe14000–Series Adapter Configuration Information .......................... 129

Configuring OCe14000-Series Adapters ..................................................... 129

OCe14000-series Adapter Configuration Tab Field Definitions ............................. 130

Custom Configurations ............................................................................ 131

Mixed Mode Configuration ........................................................................ 132

Concurrent Mode................................................................................... 133

UMC Configuration View ...................................................................... 135

IBM MultiChannel Configuration View ...................................................... 136

vNIC Configuration................................................................................. 137

SIMode Configuration.............................................................................. 137

UFP Configuration ................................................................................. 138

Dell NPAR Configuration View ............................................................... 139

Dell NPAR Enabled ................................................................................. 139

Viewing and Configuring OCe14000–Series Physical Port DCB Parameters ............ 140

Viewing Physical Port DCB Parameters ......................................................... 140

DCB Tab Field Definitions......................................................................... 141

Configuring DCB Parameters for FCoE/iSCSI Adapter Ports ................................. 142

Configure DCB Dialog Box Field Definitions.................................................... 143

7. Updating Firmware ........................................................................ 146

Performing a Batch Firmware Update in Cluster View ....................................146

Updating Firmware on Multiple Adapters in Cluster View ............................... 146

Batch Firmware Update Jobs Window Field Definitions ..................................... 149

Updating Firmware on Adapters in a Host ....................................................150

Jobs Window Field Definitions ................................................................... 152

Updating Firmware for an FC Port..............................................................153

Jobs Window for an FC Port ...................................................................... 154

Updating Firmware for OCe1010x–Series,

OCe1110x–Series, and OCe14000-Series Adapters ..........................................155

8. Exporting SAN Information in Cluster View........................................... 157

Export SAN Info Window Field Definitions ................................................. 157

Active Jobs Column Definitions ................................................................ 157

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

Table of Contents

Completed Jobs Column Definitions .......................................................... 157

Jobs Window Buttons ............................................................................ 158

Capturing SAN Information in XML or CSV Format ........................................ 160

Considerations When Exporting SAN Information in a Cluster View.................... 160

9. Diagnostics................................................................................... 161

LightPulse FC HBA Diagnostic Tests ............................................................161

Running Loopback Tests ...................................................................... 161

Running End-to-End (ECHO) Tests........................................................... 162

Running a Power On Self Test (POST) ...................................................... 162

Using Beaconing................................................................................ 163

Setting Up Diagnostic Test Options ......................................................... 163

Setting Up a Test Failure Error Action.......................................................... 163

Setting Up Test Cycles ............................................................................ 163

Setting Up a Test Pattern......................................................................... 163

Test Status .......................................................................................... 163

Saving the Log File............................................................................. 163

Creating FC Port Diagnostic Dumps ......................................................... 164

Diagnostic Dump Tab Field Definitions ......................................................... 165

Viewing Diagnostic Dumps Files ............................................................. 166

OneConnect Diagnostic Tests ....................................................................168

Running Loopback Tests ...................................................................... 168

Using Beaconing................................................................................ 169

Running a TDR Test (10GBaseT Series Adapters Only) ................................... 169

Setting Up Diagnostic Test Options ......................................................... 170

Setting Up a Test Failure Error Action.......................................................... 170

Setting Up Test Cycles ............................................................................ 170

Setting Up a Test Pattern......................................................................... 170

Test Status .......................................................................................... 170

Saving the Log File............................................................................. 170

Creating OneConnect Adapter Port Diagnostic Dumps ................................... 171

Diagnostic Dump Tab Field Definitions ......................................................... 172

Viewing Diagnostic Dumps Files ............................................................. 173

10. Using OCM for VMware vCenter Command Line Interface ....................... 175

Using the CLI Client ................................................................................176

Syntax Rules .................................................................................... 176

The Command Reference.........................................................................176

help (single command)........................................................................ 176

Syntax................................................................................................ 176

Description.......................................................................................... 176

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

Table of Contents

Parameters.......................................................................................... 176

help (group) .................................................................................... 176

changepersonality ............................................................................. 179

changewwn ..................................................................................... 180

clearisnsserver ................................................................................. 180

cmgetparams ................................................................................... 180

cmmode ......................................................................................... 181

cmsetbw......................................................................................... 182

cmsetlpvid ...................................................................................... 183

deletedumpfiles................................................................................ 184

driverconfig..................................................................................... 185

dump............................................................................................. 185

echotest ......................................................................................... 186

enablebootcode ................................................................................ 187

exportsaninfo................................................................................... 187

firmwareupdate ................................................................................ 188

getadapterportconfig (OCe14000-Series Only) ............................................ 189

getbeacon....................................................................................... 190

getdcbparams .................................................................................. 190

getdriverparams................................................................................ 190

getdriverparamsglobal ........................................................................ 191

getdumpdirectory.............................................................................. 191

getdumpfilenames ............................................................................. 192

getfcfinfo ....................................................................................... 192

getfipparams ................................................................................... 193

getinitiatorproperties ......................................................................... 193

getiscsiluns...................................................................................... 194

getiscsiportstats................................................................................ 194

getlunlist ........................................................................................ 195

getpcidata ...................................................................................... 195

getpginfo ........................................................................................ 195

getportstatistics................................................................................ 196

getretentioncount ............................................................................. 196

getsessioninfo .................................................................................. 197

getvpd ........................................................................................... 197

getwwncap...................................................................................... 198

getxcvrdata ..................................................................................... 198

hbaattributes ................................................................................... 199

installadapterlicense .......................................................................... 199

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

Table of Contents

listvfuncs ........................................................................................ 200

listhbas .......................................................................................... 200

listprofiles....................................................................................... 201

listsessions ...................................................................................... 201

listvms ........................................................................................... 202

listvports ........................................................................................ 202

loadlist........................................................................................... 203

loopbacktest .................................................................................... 203

pcidata .......................................................................................... 204

portattributes .................................................................................. 205

posttest.......................................................................................... 205

readwwn ........................................................................................ 206

reset ............................................................................................. 206

restorewwn ..................................................................................... 207

saveconfig....................................................................................... 207

serverattributes ................................................................................ 208

setadapterportconfig (OCe14000-Series Only) ............................................ 208

setbeacon ....................................................................................... 210

setcablenvp ..................................................................................... 210

setcnapgbw ..................................................................................... 211

setdcbparam.................................................................................... 211

setdcbpriority .................................................................................. 213

setdriverparam ................................................................................. 214

setdriverparamdefaults ....................................................................... 215

setdumpdirectory .............................................................................. 216

setfipparams.................................................................................... 216

setpfcthrottle .................................................................................. 217

setphyportspeed ............................................................................... 218

setportenabled ................................................................................. 219

setretentioncount.............................................................................. 219

setvccred........................................................................................ 220

showisnsserver ................................................................................. 221

showlicenseadapterfeatures ................................................................. 221

showlicenseadapterid ......................................................................... 222

showpersonalities .............................................................................. 222

showtarget ...................................................................................... 223

sriovenable...................................................................................... 223

targetmapping.................................................................................. 224

tdrtest ........................................................................................... 224

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

Table of Contents

updateisnsserver ............................................................................... 225

VEPAenable ..................................................................................... 225

version........................................................................................... 226

Viewing Audit Logs Using the CLI Command ..................................................226

11. Troubleshooting .......................................................................... 228

Security ..............................................................................................228

Accepting the Blocked Content.............................................................. 228

Internet Explorer................................................................................... 228

Chrome and Firefox ............................................................................... 228

Installing a Security Certificate ............................................................. 229

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

List of Figures

Figure 2-1 Installation Options Window.............................................................25

Figure 2-2 OCM for VMware vCenter Configuration Window.....................................26

Figure 2-3 OCM for VMware vCenter Configuration Window with Port in Use

Warning .....................................................................................26

Figure 2-4 Register/Unregister Dialog Box .........................................................27

Figure 2-5 vSphere Console ...........................................................................28

Figure 2-6 Plug-in Manager Window .................................................................29

Figure 2-7 Plug-in Manager with Selected Row ....................................................30

Figure 2-8 Register/Unregister Dialog Box .........................................................31

Figure 2-9 Reinstallation Configuration Dialog Box ...............................................33

Figure 3-1 Host-Centric Cluster View ...............................................................36

Figure 3-2 Host View...................................................................................37

Figure 3-3 vSphere Web Client Plug-In Management Page.......................................39

Figure 4-1 Hosts Information Pane ..................................................................41

Figure 4-2 Adapters Information .....................................................................43

Figure 4-3 Host-Centric Cluster View ...............................................................44

Figure 4-4 Close-Up of Host-Centric Cluster View ................................................44

Figure 4-5 Virtual Port Cluster View ................................................................45

Figure 4-6 Fabric-Centric Cluster View .............................................................47

Figure 4-7 Close-up of Fabric-Centric Cluster View...............................................47

Figure 5-1 Host Information Pane....................................................................49

Figure 5-2 Host Driver Parameters Pane............................................................51

Figure 5-3 Host Maintenance Tab....................................................................53

Figure 6-1 FC Adapter Information Tab.............................................................54

Figure 6-2 FC Port Details Tab .......................................................................55

Figure 6-3 FCoE Port Details Tab ....................................................................57

Figure 6-4 Port Driver Parameters Tab .............................................................59

Figure 6-5 Port Statistics Tab ........................................................................60

Figure 6-6 FC Port Transceiver Tab .................................................................62

Figure 6-7 Port VPD Tab...............................................................................63

Figure 6-8 FC Port Maintenance Tab ................................................................64

Figure 6-9 FCoE Port Maintenance Tab .............................................................65

Figure 6-10 FC LUN Information Tab..................................................................66

Figure 6-11 FC Port PCI Registers Tab ................................................................68

Figure 6-12 FC Port Flash Contents ...................................................................68

Figure 6-13 FCoE Port PCI Registers Tab .............................................................69

Figure 6-14 FCoE Port FIP Tab .........................................................................70

Figure 6-15 DCB Tab (FCoE Adapter Port Selected) ................................................71

Figure 6-16 Configure DCB Dialog Box for FCoE Adapter Ports (DCBX Enabled) ...............73

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

List of Figures

Figure 6-17 Change WWN Configuration Dialog Box ................................................75

Figure 6-18 Warning About Changing WWN ..........................................................76

Figure 6-19 Reset Port Warning .......................................................................77

Figure 6-20 iSCSI Port Info Tab ........................................................................79

Figure 6-21 iSCSI Port, PCI Registers Tab ............................................................81

Figure 6-22 iSCSI Port, iSNS Tab.......................................................................82

Figure 6-23 iSCSI Port, Update iSNS Server Dialog Box ............................................82

Figure 6-24 iSCSI Initiator, iSCSI Statistics Tab .....................................................83

Figure 6-25 iSCSI Initiator Logon Options Tab .......................................................85

Figure 6-26 iSCSI Initiator Default Login Options Window.........................................85

Figure 6-27 iSCSI Target Discovery Tab ..............................................................88

Figure 6-28 iSCSI Target Information Tab............................................................89

Figure 6-29 iSCSI Target Sessions Window ...........................................................90

Figure 6-30 iSCSI LUN Info Tab ........................................................................92

Figure 6-31 iSCSI Port VPD Tab ........................................................................93

Figure 6-32 DCB Tab (iSCSI Adapter Port Selected) ................................................94

Figure 6-33 Configure DCB Dialog Box for iSCSI Adapter Ports (DCBX Enabled)................96

Figure 6-34 NIC Port Information Tab ................................................................99

Figure 6-35 NIC Port Information Tab, VEPA Enabled............................................ 102

Figure 6-36 NIC Port PCI Registers Tab ............................................................. 103

Figure 6-37 NIC Port VPD Tab........................................................................ 104

Figure 6-38 Virtual Functions Discovered on the Physical Function on the Host

Operating System ....................................................................... 105

Figure 6-39 Port Information tab for NIC Virtual Function ...................................... 106

Figure 6-40 OneConnect Adapter Information Tab ............................................... 107

Figure 6-41 License Features Area .................................................................. 110

Figure 6-42 Install Feature Licenses Dialog Box................................................... 111

Figure 6-43 Channel Mgmt tab for the OCe11102 adapter ...................................... 113

Figure 6-44 Channel Management Tab in vNIC1 Mode ........................................... 115

Figure 6-45 Channel Management Tab in UFP Mode.............................................. 116

Figure 6-46 OCe1110x-Series Adapter Maintenance Tab ........................................ 117

Figure 6-47 OCe1110x–Series Adapter Physical Port Info Tab................................... 118

Figure 6-48 Change Port Speed Dialog Box ........................................................ 119

Figure 6-49 OneConnect Adapter PHY Data Tab .................................................. 121

Figure 6-50 OCe1010x–Series Port Transceiver Tab .............................................. 122

Figure 6-51 FCoE Adapter Port, DCB Tab .......................................................... 124

Figure 6-52 DCB Configuration Dialog Box for FCoE and ISCSI Adapter Ports

(DCBX Enabled) .......................................................................... 126

Figure 6-53 OCe14000-series Adapter Configuration Tab (FCoE selected).................... 130

Figure 6-54 Current Configuration Details example .............................................. 131

Figure 6-55 OCe14000-series Adapter Configuration Tab, Custom Configuration ........... 132

Figure 6-56 Mixed Mode Protocol pull down menu ............................................... 133

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

List of Figures

Figure 6-57 Concurrent Storage Configuration View ............................................. 134

Figure 6-58 Concurrent Storage Configuration Choices for the Third Function .............. 134

Figure 6-59 UMC View (concurrent mode storage) ............................................... 135

Figure 6-60 MultiChannel View (showing multichannel type drop-down)..................... 136

Figure 6-61 MultiChannel vNIC View (mix mode storage) ....................................... 137

Figure 6-62 MultiChannel SIMode View ............................................................. 138

Figure 6-63 MultiChannel UFP View (concurrent mode storage) ............................... 138

Figure 6-64 NPAR Configuration ..................................................................... 139

Figure 6-65 Adapter Configuration Tab with NPAR Enabled .................................... 140

Figure 6-66 OCe14000-Series Adapter, DCB Tab (FCoE/iSCSI Adapter Port Selected) ...... 141

Figure 6-67 DCB Configuration Dialog Box for FCoE and ISCSI Adapter Ports

(DCBX Enabled) .......................................................................... 143

Figure 7-1 Batch Firmware Update Information Pane .......................................... 146

Figure 7-2 Batch Firmware Download Dialog Box, Host-Centric View........................ 147

Figure 7-3 Batch Firmware Download Dialog Box, Fabric-Centric View ..................... 148

Figure 7-4 Batch Firmware Update Jobs Window ............................................... 149

Figure 7-5 Empty Batch Firmware Download Dialog Box ....................................... 150

Figure 7-6 Populated Batch Firmware Download Dialog Box .................................. 151

Figure 7-7 Jobs Window ............................................................................. 152

Figure 7-8 Firmware Download dialog box ....................................................... 153

Figure 7-9 Jobs Window ............................................................................. 154

Figure 7-10 Firmware Download Dialog Box ....................................................... 155

Figure 7-11 Jobs Window ............................................................................. 156

Figure 8-1 Export SAN Info .......................................................................... 157

Figure 8-2 Export SAN Info Dialog Box ............................................................ 158

Figure 8-3 Export SAN Info Jobs Window, Active Jobs List .................................... 159

Figure 8-4 Export SAN Info Jobs Window, Completed Jobs List ............................... 159

Figure 9-1 FC Adapter Diagnostics Tab ........................................................... 161

Figure 9-2 Diagnostic Tests Warning .............................................................. 162

Figure 9-3 Diagnostic Test Log Entries ............................................................ 164

Figure 9-4 FC Port Diagnostic Dump Tab ......................................................... 165

Figure 9-5 Diagnostic Dump Files window ........................................................ 166

Figure 9-6 Datastores View of vSphere Client ................................................... 167

Figure 9-7 vSphere Datastore Browser ............................................................ 167

Figure 9-8 OneConnect Adapter Diagnostics Tab................................................ 168

Figure 9-9 Diagnostic Tests Warning .............................................................. 169

Figure 9-10 Diagnostic Test Log Entries ............................................................ 171

Figure 9-11 Port Diagnostic Dump Tab ............................................................. 172

Figure 9-12 Diagnostic Dump Files window ........................................................ 173

Figure 9-13 Datastores View of vSphere Client ................................................... 174

Figure 9-14 vSphere Datastore Browser ............................................................ 174

Figure 11-1 Blocked Content in Internet Explorer ................................................ 228

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

List of Figures

Figure 11-2 Blocked Content in the Firefox or Chrome Browser ............................... 229

Figure 11-3 Untrusted Certificate................................................................... 229

Figure 11-4 Certificate Dialog Box .................................................................. 230

Figure 11-5 Certificate Import Wizard ............................................................. 230

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

List of Tables

Table 1-1 Support Provided by Emulex CIM Provider Versions .................................18

Table 10-1 Group and Supported Commands ..................................................... 177

Table 11-1 Troubleshooting Issues and Resolutions ............................................. 231

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

1. Introduction

Emulex

OneCommand Manager

™

for VMware vCenter (OCM for VMware vCenter)

integrates the in-depth management of Emulex host bus adapters (HBAs), universal

converged network adapters (UCNAs), and converged fabric adapters (CFAs) into the

VMware vCenter management console.

This comprehensive solution builds upon standard Emulex Common Interface Model

(CIM) management providers and advanced functionality delivered with the Emulex

OneCommand Manager application to present native configuration management,

status monitoring, and online maintenance of Emulex adapters in VMware ESXi

environments, using a graphical (GUI) or command line (CLI) user interface.

OCM for VMware vCenter supports the following VMware platforms:

 VMware ESXi 5.5

 VMware ESXi 5.1

 VMware ESXi 5.0

OCM for VMware vCenter can be hosted/registered on the following servers:

 vCenter Server 5.5

 vCenter Server 5.1

 vCenter Server 5.0

OCM for VMware vCenter version 10.0 is supported for the following operating

systems:

 Windows Server 2008 SP2 (or later) – Standard, Enterprise and Datacenter

editions (32 bit, x86) and (64 bit, x86_64)

 Windows Server 2008 R2 – Standard, Enterprise and Datacenter editions (32 bit,

x86) and (64 bit, x86_64)

 Windows 7 (64-bit)

 Windows 8 (64-bit)

 Windows 2012 (64 bit)

Refer to Table 1-1, Support Provided by Emulex CIM Provider Versions, on page 18 to

determine the support provided by your Emulex CIM Provider.

Note: Screen shots in this manual are for illustrative purposes only. Your system

information can vary.

OCM for VMware vCenter supports Emulex LPe16202 CFAs. If the CFA is in Fibre

Channel (FC) mode, it functions as an FC adapter. If it is in Fibre Channel over Ethernet

(FCoE) + network interface card (NIC) mode, it functions as a UCNA.

OCM for VMware vCenter supports Emulex OCe14101 and OCe14102 UCNAs.The

features available in OCM for VMware vCenter are determined by the version of

Emulex CIM provider installed.

The following table lists the Emulex OneCommand Manager application support

provided by each Emulex CIM provider package and the individual FC and UCNA

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

1. Introduction

providers in each package. The Emulex CIM Provider packages can be downloaded

from the Emulex website.

Note: In Table 1-1, “

” indicates the feature is supported on the particular Emulex

CIM Provider version and OCM for VMWare vCenter. ”N/A” table cells

indicate that the feature is not applicable.

Table 1-1 Support Provided by Emulex CIM Provider Versions

Emulex OneCommand

Manager Application

Features

ELX CIM

Provider

Package

v3.9

ELX CIM

Provider

Package

v10.0

OCM for

VMware

vCenter v 1.6

OCM for

VMware

vCenter

v10.0

UCNA FC UCNA FC

Discover virtual ports

connected to an FC or FCoE

port

  

View virtual port information

in a cluster (host-centric

mode)

N/AN/AN/AN/A  

Discover hosts, adapters (FC,

FCoE, NIC and iSCSI), targets,

and LUNs for selected ESXi

hosts

  

Discover hosts and adapters

(FC and FCoE) for selected

ESXi fabrics

  

Display firmware revision   

Display boot code version   

Update firmware and FC boot

code on a single adapter

  

Update firmware and FC boot

code on a per-fabric basis

N/A N/A   

Change WWPN or WWN for FC

adapters

  

Locate adapters with

beaconing

  

Display PCI-Express registers   

Physical Loopback test  N/A  

UCNA only



MAC loopback test  N/A  N/A 

UCNA only



UCNA only

PCI loopback test N/A  N/A 

FC only



FC only

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

1. Introduction

Internal and External loopback

test

N/A  N/A  

FC only

Echo test N/A  

FC only

POST test N/A N/A 

FC only



LP only

TDR tests  N/A  N/A 

UCNA – 10G

Base-T only

Batch update firmware and FC

boot code to multiple adapters

N/AN/AN/AN/A 

Enable/disable ports   

Get driver parameters (Global

and Port)

  

Set global driver parameters

to adapters

  

Set port driver parameters to

adapters

  

Target and LUN information   

Reset Port (FC and FCoE only)   

Toggle PFC throttle (FCoE

only)

 N/A 

UCNA

OCe10102 series

only

View VPD   

View data   

View physical data for

10GBase-T adapters

 N/A  N/A 

UCNA -

10GBase-T only



UCNA -

10GBase-T only

iSCSI management  N/A  N/A 

Enable/disable FIP data  N/A  N/A 

UCNA only



UCNA only

Table 1-1 Support Provided by Emulex CIM Provider Versions (Continued)

Emulex OneCommand

Manager Application

Features

ELX CIM

Provider

Package

v3.9

ELX CIM

Provider

Package

v10.0

OCM for

VMware

vCenter v 1.6

OCM for

VMware

vCenter

v10.0

UCNA FC UCNA FC

OCM for VMware vCenter Version 10.0 User Manual P009805-01A Rev. A

1. Introduction

Abbreviations

BIOS basic input-output system

BOFM IBM BladeCenter Open Fabric Manager

CDB command descriptor block

CFA converged fabric adapter

CHAP Challenge Handshake Authentication Protocol

CIM Common Interface Model

CIN Cisco, Intel, Nuova (data center bridging exchange)

CLI command line interface

CLP command line protocol

CM channel management

DCB configuration  N/A 

UCNA only



UCNA only

Display flash contents (wakeup

parameters/flash load list)

N/A 

FC only



FC only

LP only

Export SAN configuration

information at cluster level

and at host level

N/AN/AN/AN/A 

Perform diagnostic dump at

the adapter and port level

  

Personality (protocol) change

and licensing

 N/A  N/A 

UCNA only



UCNA only

iSCSI boot firmware table

(iBFT) support

 N/A  N/A 

UCNA only



UCNA only

Bandwidth softcapability  N/A 

Channel Management  N/A  N/A 

Single root I/O virtualization

(SR-IOV)

 N/A N/A N/A 

Virtual Ethernet Port

Aggregator (VEPA)

(Enabled SR-IOV required)

N/A N/A  N/A 

OCe14000 series

only

Table 1-1 Support Provided by Emulex CIM Provider Versions (Continued)

Emulex OneCommand

Manager Application

Features

ELX CIM

Provider

Package

v3.9

ELX CIM

Provider

Package

v10.0

OCM for

VMware

vCenter v 1.6

OCM for

VMware

vCenter

v10.0

UCNA FC UCNA FC

Page is loading ...

Broadcom OneCommand Manager for VMware vCenter Version 10.0 User guide

Broadcom OneCommand Manager for VMware vCenter Version 10.0 User guide

Broadcom OneCommand Manager for VMware vCenter Version 10.0 User guide

Related papers

Other documents