Toro Replacement Dipstick Kit Installation guide
- Type
- Installation guide
FormNo.3359-116RevA
ReplacementDipstickKit
ModelNo.114–4138
ModelNo.115–0940
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
RemovetheExistingCap/Adapter
System
Oilllcap
1
O-ringseal(T oroPartNo.57–9610)
1
Threadformingscrew
1
2
Dipstick1
InstallNewDipstickCap
1
NoPartsRequired
RemoveExistingCap/AdapterSystem
1.Unscrewandremovetheoilllcapfromtheadapter
(Figure1).
2.Unscrewtheadapterfromthedipsticktube
(Figure1).
Note:MakesurethelowerO-ringisremovedfrom
theadapter/dipsticktube(Figure1).Discardall
components.
Figure1
1.Oilllcap
5.Adapter
2.Dipstick
6.O-ring
3.Screw
7.Dipsticktube
4.O-ring
©2007—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
2
InstallNewDipstickCap
Partsneededforthisprocedure:
1
Oilllcap
1
O-ringseal(ToroPartNo.57–9610)
1
Threadformingscrew
1Dipstick
Procedure
1.InstallanO-ring(ToroPartNo.57–9610)ontothe
newoilllcap.PushtheO-ringpastthethreadsand
intothegrooveabovethecap’sthreads(Figure2).
Figure2
1.Oilllcap4.Threadformingscrew
2.O-ring
5.Dipsticktube
3.Dipstick
2.Installthedipsticktotheoilllcapwiththethread
formingscrew(Figure2).
3.Threadtheoilllcapintothedipsticktubeuntilthe
O-ringisproperlyseatedonthecap.
2
-
1
-
2
Toro Replacement Dipstick Kit Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Toro FP-2200 Forward Plate Compactor User manual
-
Toro RP-1200 Reversible Plate Compactor User manual
-
-
Toro Dingo TX 425 Wide Track Compact Utility Loader User manual
-
-
Toro TRX-20 Trencher User manual
-
-
-
-
Toro STX-26 Stump Grinder User manual