2. Dero
  3. U-LOCKIG10

Dero U-LOCKIG10, U-LOCKIT6, U-LOCKIT8 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Dero U-LOCKIG10 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.dero.com | 1-888-337-6729
© 2015 Dero
U-LOCKIT™
Setbacks
96”
36”
24”
36”
Double sided use
Single sided use
www.dero.com | 1-888-337-6729
© 2015 Dero
Place the rack in the desired location. Use a
marker or pencil to outline the holes of the flange
onto the base material.
When assembly is completed, position the
assembly and anchor to the ground through the
slotted holes in the plates on each end of the run
of racks. For longer runs you may also need to
add anchors to a middle section.
Attach the next hoop and (2) plates with (2) 3/8”
x 1” tamper-resistant bolts, (2) 3/8” x 1” bolts,
and (4) washers. Continue attaching hoops and
plates as needed.
1
3
2
U-LOCKIT™
Installation Instructions
Tamper-resistant
Standard
/